Regular cleaning with mild soapy water and a non-abrasive cloth is recommended, particularly for pieces used externally, to remove build-up on the surface of the finish.
You can also remove the grime and grease from nickel by using household ammonia mixed with water. A good mixture would be 25-percent ammonia and 75-percent water. Soak for 30 minutes and check if the grime is coming off. If not, add more ammonia and re-soak. You may need to brush gently with a soft cleansing brush.
Do Not Use Polish on these finishes: The Plated Finishes: The Polished Nickel (PN) and Satin Nickel (SN) finishes are durable, but will eventually dull slightly and may tarnish, as well as show some fingerprints and watermarks. These finishes should be cleaned with a mild metal polish such as Flitz or Nevr-Dull brands.
For care and maintenance, most manufacturers recommend cleaning with mild soap and water and keeping faucet wiped dry. You might try gently rubbing the affected area with a little baking soda on the corner of a damp cloth. Then, clean and seal with Gel Gloss.
Glass cleaner can be a quick and efficient way to clean and polish nickel surfaces: Spray the Cleaner: Apply a small amount of glass cleaner directly onto the nickel surface. Wipe: Use a clean cloth or paper towel to wipe the surface, removing fingerprints and smudges.
Regular cleaning with mild soapy water and a non-abrasive cloth is recommended, particularly for pieces used externally, to remove build-up on the surface of the finish.
Hydrogen peroxide is a fantastic solution for removing dirt from coins while also sterilizing them. Simply place the coins in a bowl and ensure they are completely covered with hydrogen peroxide. Allow them to soak for a full 24 hours. Afterward, rinse the coins with water and gently dry them using a cloth.
Magic erasers are abrasive foam cleaners that are effective at treating stains and spots on sturdy surfaces. If you use them on polished, finished, painted or waxed surfaces, they will strip the protective coating leaving noticeable discoloured patches on the surfaces.
Don't use chemical products: Anything too harsh could simply strip the nickel plating off your items. Don't over soak: As per advice above, soaking items in neat vinegar or ammonia, or leaving them longer than 30 minutes could actually cause more damaged than good.
Is the CLR product nickel safe? We do not recommend that CLR products be used on any metals except for chrome or stainless steel. Any 'polished' finish usually has a coating and most nickel materials are combination metals (containing zinc) and CLR products could compromise the finish.
While some feel that polished nickel is a more luxurious finish, it does have a couple of downsides in that it is a pricier finish and it does require some periodic maintenance. And, like polished chrome, polished nickel can show fingerprints and water spots.
For items fitted outside if you start to see pitting marks in the nickel a metal polish such as “Brasso” or “Peek” can be used to polish the layer of nickel. Regular cleaning to remove dirt, finger prints and water marks will ensure your Polished Nickel products will last for a very long time.
Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring pad to clean surfaces. KOHLER® faucets are made from solid brass or zinc die-cast metal, providing a durable base for a variety of Polished or Brushed textures, as well as a palette of KOHLER colors.
Regular Care
Nickel and Chrome are generally quite low maintenance, but the finish does benefit from occasional cleaning with warm, mild soapy water and a soft, non-abrasive cloth. Then give it a good wipe over with a lint free cloth to dry - it is important to do this quite quickly to prevent water marks from forming.
“Faucets with black, bronze, or gold-colored coatings and finishes may get damaged or discolored by the vinegar's acidity. Vinegar also has a strong odor, though it's not toxic. However, if you're cleaning with it, it's always a good idea to ventilate the space.
Be sure to avoid using acid, alcohol, or solvent-based cleaners. These types of cleaners can ruin or discolor the more delicate surface of the brushed nickel finish. Vinegar is a popular faucet cleaning solution, but should be avoided on brushed nickel.
You're better off using a soft toothbrush or cloth, and a non-caustic cleaning product designed to safely clean metals, like Simple Green Pro HD Heavy-Duty Cleaner. The professional grade cleaner and degreaser breaks down grease and grime, and removes soils on a wide variety of surfaces.
Can you use Bar Keepers Friend on brushed nickel? 'If you are struggling to clean the brushed nickel around your home, you can use a bar keepers friend,' says Laura. 'Just apply a bit of Bar Keeper's friend on a damp cloth and it will polish the nickel easily.
Add a small amount of water to a tablespoon of baking soda to form a paste. Apply the paste to each coin using an old toothbrush and scrub gently. Rinse the coins to reveal the now-shiny surfaces.
By washing first with warm water, using a metal cleaner for persistent blemishes, and then polishing, you will keep your nickel plating strong and lustrous for years to come.
Don't Use Them On Your Car
Or any other delicate surface, for that matter, like silverware, glass, or metal surfaces. Dry erasers have the abrasiveness of a 3000 grit sandpaper – very fine, but can still mar shiny surfaces – like your stainless steel appliances!
Avoid bleach. Do not use cleaners that contain alcohol or ammonia to clean brushed nickel. Abrasives should never be used as they may affect the finish.
According to research professor Vinod Patel, washing common coins with natural white vinegar and iodized salt in distilled water is a non destructive way of cleaning them.
Using a clean, soft cloth, wipe the surface with degreaser, rubbing with the grain of the metal. Clean surface dirt and grease only, do not abrade the metal. Wipe the surface with clean, soft cloth soaked with non- ionic detergent or cleaning solution (see Section 2.02 B.