Mix a 50/50 solution of vinegar and warm water and pour it into a spray bottle. Mist on cabinets, let sit for a minute or two and then wipe clean with a soft cloth. Add a few drops of liquid dishwashing detergent to the vinegar and water solution to clean extremely grimy cabinets.
In a spray bottle mix, 2 cups of water, 1 cup of vinegar, and 2 tablespoons of Dawn. Shake to mix. Spray down the sticky cabinet. Wipe the grime away with a sponge.
Greasy Cabinet Cleaning Method: Castile Soap + Baking Soda + Vinegar. The method: Fill a 32-ounce spray bottle with a cup of white vinegar, a few drops of castile liquid soap (we like Dr. Bronner's concentrated version), a tablespoon of baking soda, and water.
Dawn recommends adding a few drops of detergent to a bowl of warm water for general cabinet cleaning. For stubborn areas, it says to squirt detergent directly onto a sponge or cloth while holding it under running warm water. Test the cleaner on a small, inconspicuous area before you commit to cleaning everything.
How do you clean sticky wood cabinets? The sticky residue you feel is the grease particles that float in the air while cooking and then attach to the cabinets. I use Murphy's Oil Soap and a little water. Be careful not to rub too hard or you'll rub off the finish.
Simple solutions of dish soap and water can do wonders for cleaning away grease, splatters, and food messes. Dawn® Platinum makes cleaning kitchen cabinets So Dawn Easy! The unique formula quickly breaks down grease particles while staying gentle enough to not cause any damage.
You'll want to get two buckets that are large enough to swish a rag around in the water to shake it of excess dirt, and you'll also want a good natural wood cleaner. Murphy® Oil Soap gets deep into grime to break up dirt particles and it's safe to use on wood products like cabinets.
Water (with a pH of 7) and dish soap (with a pH between 7 and 8) are always good options. The best cleaner, the one that is less likely to do damage to the wood is good old-fashioned elbow grease. Applied with a damp cloth, elbow grease should be effective at removing dirt and dust and even oil and grease build-up.
Clear Finishes: Mix up equal parts of paint thinner and a mild soap, such as Murphy Oil Soap, and apply with a sponge or paintbrush. Wipe the solution away with a rag to clear the dirt; you'll likely remove a thin layer of varnish or shellac, too, because the grime has melded with it.
CLEANING PRODUCTS FOR WOOD FURNITURE
A gentle, water-based solution such as Murphy® Oil Soap Original works well when cleaning and protecting the finish on your wood floors, furniture and cabinets.
Mix a cup of white vinegar with a cup of water. This mild cleaning solution is perfect for everyday use on wooden cabinets. It won't warp the wood or take off the finish. If you dislike cleaning with vinegar, you can use a light soap solution instead.
You can use a Magic Eraser or household baking soda to remove stubborn pen marks, paint splotches, or rock-hard food splatters from wood cabinets. But remember that both are abrasives, so you'll need to work carefully in order to remove only the stain and not the wood finish.
You should absolutely NOT use Murphy's Oil Soap to clean your wood floors!
For heavy cleaning, dilute 1/2 cup Murphy per gallon. Clean well with wrung-out mop, and mop any excess water. No visible residue, no rinsing required.
Our top pick is the Weiman Cabinet & Wood Clean & Shine Spray. It is an easy-to-use spray that conditions and cleans in one application. For a budget-friendly cleaner that can work around the entire house, consider the Favor Spray Furniture Polish Spray.
Kitchen cabinets that have not adequately dried after cleaning can also become sticky. This is because cabinets are usually made of porous materials that absorb water and cleaning solutions. So, when water and cleaning solutions don't dry properly, they leave behind a sticky residue.
Dilute ¼ cup of Pine-Sol® in one gallon of warm water. Dampen a sponge in the mixture, wring out so it's just damp to wipe away grease, grime and dirt. Optional: Scrub stubborn messes or stains with full strength Pine-Sol®, using a sponge or soft cloth. Finish by rinsing with water and wipe kitchen cabinets dry.