Vinegar or baking soda: These natural cleaners work well to clean cement patios with stubborn charcoal or rust spots.
Mix a solution of 1/8 of a cup liquid dishwashing detergent, ½ cup baking soda, and one gallon of water. Pour over the stain. Use a soft brush to scrub the stain away. Rinse the area.
Best Alkaline Concrete Cleaner—Sunnyside TSP
TSP stands for trisodium phosphate, and it's a heavy-duty cleaner that's sure to lift stains and dirt from concrete. Sunnyside TSP is an affordable and effective solution to messy concrete, particularly indoors as the phosphate can be bad if it reaches outdoor water sources.
Neutral pH neutral cleaners are ideal for cleaning sealed concrete surfaces free from embedded dirt and deep stains. They can also be used on unsealed indoor or outdoor concrete surfaces that only require a mild cleaning. Alkaline concrete cleaners have powerful degreasing capabilities.
In fact, vinegar removes mold from concrete better than bleach. Bleach will only remove the top layer of mold, causing the mold to return.
Vinegar and Baking Soda
Simply fill a spray bottle with equal parts water and vinegar (or water and baking soda), and add a little bit of liquid dish detergent. Spray the mixture on your concrete surface and let it sit for about 30 minutes. Then scrub and rinse your concrete.
Use Bleach
But that's not all; chlorine bleach can also be used for cleaning the concrete driveway. Of course, you should dilute it with equal parts of water or a 1:1 ratio. With the mixture ready, spray it on the driveway, allowing it to sit for 10 minutes. Then, use a stiff brush before rinsing with clean water.
Use a mild grease-cutting detergent such as Dawn or Ajax dishwashing liquid mixed with water and a natural or synthetic bristle scrub brush to help brighten the patio surface. NOTE: Never use a wire brush as it can leave rust stains and scratch the concrete surface.
As a gentler cleaner, bleach can't harm concrete's durable material. Aside from being an effective cleaner and stain remover, it also acts as a disinfectant to the concrete surface.
Product description. OxiClean is a powerful concrete cleaner that works well on various materials, including pavement and grout.
Most stains on concrete floors can be removed quickly and easily, but a lot depends on how old the stain is and how porous the concrete surface is. Rust, oil, grease, paint or glue stains each have a recommended stain removal technique.
Try to remove the cement stains or mortar residue with one part vinegar and one part warm water. Then you brush this solution onto the surface. Leave to absorb and then rinse with clean water. Depending on the type of surface, you can remove cement stains and mortar stains with sandpaper or a scraper.
Acid Staining
Acid stains are a reactive coloring process that penetrates into the porous concrete surface. This is probably the most permanent of all coloring options but is usually limited to eight colors.
Vinegar is an all-natural solution for cleaning concrete. It kills mildew and mold, removes grime, and helps treat set-in stains. Before cleaning concrete with vinegar, it's essential to dilute it so you don't affect your sealer.
Scrub the concrete with a nylon-bristled brush and then rinse thoroughly with the garden hose. For extremely heavy stains, a power washer provides a much stronger stream of water to blast away the grime. Use a hose to rinse greenery after the patio is clean.
Yes, vinegar is an excellent concrete cleaner. This solution can strip surface-level messes from concrete. Due to its acidic properties, vinegar can be a powerful tool for breaking down offensive materials such as dirt, stains, and bacteria. However, vinegar's acidic nature may be terrible for other materials.
Liquid peroxide formulas clean and brighten grout lines without harsh acids and chlorine bleaches that can damage the grout and surrounding flooring materials. The Liquid peroxide cleans, refreshes, and brightens concrete, tile, and grout without leaving watermarks or residue in contrast to other cleaning chemicals.
Grab Hydrogen Peroxide
For a natural, stronger solution to tackle stubborn stains on concrete surfaces, mix flour and hydrogen peroxide into a paste the consistency of peanut butter. Spread it over the stained area, and then scrub it with a nonmetallic brush. After giving it a good scrub, let sit overnight.
Whether your patio is sealed concrete or cement, or even sealed concrete pavers, a bleach and water solution makes it easy to clean away built up soil, stains from leaves and pollen, mold, mildew and algae.
Bleach is commonly used to whiten concrete and is very effective at doing so if the initial stain is removed beforehand. Bleaching stained concrete white prepares it for any additional coloring treatments that you may wish to apply in the future.
Cleaning concrete with muriatic acid can be a highly effective solution if used correctly, providing ultra-bright white concrete and removal of many types of stains. In one application, you can remove rust stains, oil stains, algae, and paint splatter with a quick chemical application followed by pressure washing.