What chemical will clean concrete? If you have mildew stains, the best chemical to clean concrete is trisodium phosphate. Combine two tablespoons of the chemical with two tablespoons of powdered laundry detergent and one-quart water. Then, apply it to the stained area and scrub using a stiff brush.
Cleaning concrete with muriatic acid can be a highly effective solution if used correctly, providing ultra-bright white concrete and removal of many types of stains. In one application, you can remove rust stains, oil stains, algae, and paint splatter with a quick chemical application followed by pressure washing.
In fact, vinegar removes mold from concrete better than bleach. Bleach will only remove the top layer of mold, causing the mold to return.
Mix equal parts water and vinegar and apply it to concrete. If this stain removal technique doesn't work, use 100% vinegar and scrub stains out. This solution can work on many surfaces, including car seats and hardwood floors.
Use a mild grease-cutting detergent such as Dawn or Ajax dishwashing liquid mixed with water and a natural or synthetic bristle scrub brush to help brighten the patio surface. NOTE: Never use a wire brush as it can leave rust stains and scratch the concrete surface.
Vinegar and Baking Soda
Simply fill a spray bottle with equal parts water and vinegar (or water and baking soda), and add a little bit of liquid dish detergent. Spray the mixture on your concrete surface and let it sit for about 30 minutes. Then scrub and rinse your concrete.
Pressure washing is one of the fastest, most effective ways to get your concrete white again. Concrete can change color over time due to pollen, algae, or dirt buildup, but a good pressure wash can easily remove dirt and stains and make your concrete look new again.
Use Bleach
But that's not all; chlorine bleach can also be used for cleaning the concrete driveway. Of course, you should dilute it with equal parts of water or a 1:1 ratio. With the mixture ready, spray it on the driveway, allowing it to sit for 10 minutes. Then, use a stiff brush before rinsing with clean water.
As a gentler cleaner, bleach can't harm concrete's durable material. Aside from being an effective cleaner and stain remover, it also acts as a disinfectant to the concrete surface.
A quick answer is yes! White vinegar can clean concrete and remove stains. It may not be as powerful as concrete cleaners, but it can clean up concrete stains on a budget. Not to mention that vinegar can also remove germs and bacteria from concrete.
Another relatively safe and environmentally friendly solution for cleaning concrete is an oxygen bleach product, such as OxiClean. Just be sure to wear rubber gloves, as bleach products can be tough on skin. Sprinkle the powerful solution over the entire patio and scrub it with an ordinary push broom.
You can use Simple Green Oxy Solve Concrete and Driveway Cleaner to clean a concrete patio with or without a pressure washer. It removes oil, grease, grime and most stains and discolorations. Its biodegradable formula is safe for lawns and pets.
Vinegar or baking soda: These natural cleaners work well to clean cement patios with stubborn charcoal or rust spots. Mix equal parts vinegar and water, scrub the patio with the mixture, then give it a good rinse. If stains don't dissolve, try undiluted vinegar.
The 1600-WHITE series of water-based, white-pigmented concrete curing compounds are wax-based dispersions with selected white pigments. When properly applied, 1600-WHITE forms a premium-grade membrane, which optimizes water retention.
Usually this white or off-white discoloration to concrete and masonry forms when soluble salts and other water dispersible materials come to the surface through capillary voids as a result of temperature changes, moist migration, condensation, rain, dew, and/or too much water in the mix.
Muriatic acid can work wonders on filthy concrete. However, it shouldn't be used on penetrating sealers since it can damage these finishes. It might also damage some acrylic sealers, so test a small area if you're not sure.
Vinegar does not dissolve concrete itself but can degrade the cement that binds concrete together. As a weak, dilute acid, vinegar will cause only minor damage to concrete but can take the shine off polished surfaces. It can, however, be used to remove small amounts of cement from tools.
Mix a solution of 1/8 of a cup liquid dishwashing detergent, ½ cup baking soda, and one gallon of water. Use a soft brush to scrub the mixture into the stain. Rinse, or use sawdust to absorb the soapy water. Sweep the sawdust away.