Rigid foam board insulation is available in many materials, including polystyrene (R-3.8 to R-5.0), polyurethane (R-5.5 to R-6.5) and polyisocyanurate (R-5.6 to R-8.0). Since it has the highest R-value, rigid foam is typically reserved for foundations and basement walls.
So having in mind that spray foam, fiberglass, and cellulose are the three mostly used insulation materials we made a comparison, and here are the results: Spray foam has by far the highest R-value, which is crucial for homes in extremely cold climates.
Vacuum insulated panels have the highest R-value, approximately R-45 (in U.S. units) per inch; aerogel has the next highest R-value (about R-10 to R-30 per inch), followed by polyurethane (PUR) and phenolic foam insulations with R-7 per inch.
Aerogel is one of the most advanced insulation materials available, with up to 90% air content, making it extremely lightweight and highly effective at reducing energy loss.
Vacuum insulation panels (VIPs) are among the most advanced insulation materials on the market. They use a vacuum-sealed core to achieve exceptional thermal resistance, often far superior to traditional options like fiberglass or foam. Pros: Ultra-thin panels conserve space while providing top-tier insulation.
Thermablok® Aerogel is a revolutionary advancement in thermal technology offering the thinnest insulation available to prevent thermal and cold bridging. Classed as a Super Insulation, Aerogel has the highest insulation value of any known material with the lowest thermal conductivity value of any solid (0.015W/mK).
The optimal R-value for most homes is 30, but you can go as high as 38 if you live in a tropical climate. Anything higher than 38 indicates an over-insulated space.
Fibreglass insulation is the most effective for frigid climates; it can be applied to walls, lofts, and other areas where heat may escape. Adding insulation can reduce energy costs and maintain a comfortable residence throughout the winter.
Spray Foam Insulation
Spray foam also offers a high R-value per inch, but while spray foam insulation has a lot of benefits, it is also one of the most expensive types of insulation. Professional installation is recommended to ensure that the foam is applied evenly, effectively, and safely.
Batt or Roll Insulation
In colder regions, a minimum thickness of 3-4 inches is typically recommended, while warmer regions may only need 1-2 inches. It's important to ensure that the batts or rolls are installed tightly without any gaps to prevent heat loss.
It is possible to over-insulate your house so much that it can't breathe. The whole point of home insulation is to tightly seal your home's interior. But if it becomes too tightly sealed with too many layers of insulation, moisture can get trapped inside those layers. That's when mold starts to grow.
Foam Board or Rigid Foam
They provide good thermal resistance (up to 2 times greater than most other insulating materials of the same thickness), and reduce heat conduction through structural elements, like wood and steel studs.
The best insulating materials have a U-Value of close to zero; the closer to zero the better. Under LABC guidelines, the retrofitting of insulation to existing buildings requires the following U-Value targets: Wall – 0.3 W/m2k. Roof – 0.18 W/m2k.
The best insulator in the world right now is most probably aerogel, with silica aerogels having thermal conductivities of less than 0.03 W/m*K in atmosphere. of aerogel preventing ice from melting on a hot plate at 80 degrees Celsius! Aerogel has its amazing properties because it's mostly made out of air.
The recommended thickness for EWI typically ranges between 60mm and 100mm, depending on the type of insulation material used, the construction of your existing walls, and the age of your home.
Fiberglass insulation is known for its excellent thermal insulating properties. It is composed of fine glass fibers that create a layer of trapped air pockets. This structure slows down heat transfer through conduction, reducing heat loss in winter and heat gain in summer.
Overall, if you are looking for the best long-term solution, foam insulation products will create the air seal in your home that will make it more comfortable while saving you money on your monthly energy bills. Foam insulation doesn't settle or sag and it fills all the nooks and crannies where it is installed.
a ceramic fiber insulation material known as Refrasil has been used extensively as a heat-absorbing ablative reinforcement for such space systems as rocket motor nozzles, combustion chambers, and re-entry shields.