What is the average labor cost to replace drywall?

Author: Dayana Wiza  |  Last update: Sunday, October 5, 2025

Labor accounts for about 70% of the cost of installing drywall. Hiring a local drywall installer will cost $1 to $2.10 per square foot, totaling $690 to $2,200 on average.

How much does it cost to tear out and replace drywall?

Drywall removal and disposal costs $0.50 to $2.50 per square foot, or about $50 to $250 to remove the drywall and leave the framing intact. Non-load-bearing walls and empty walls with no electrical or plumbing lines are cheaper and easier to remove than load-bearing walls and those needing utility lines rerouted.

How much labor does it cost to mud and tape drywall?

Cost per square foot for mud and tape drywall jobs

On average, the labor and material cost to mud and tape drywall is between $1.50 and $3.50 per square foot. Our findings show that there are three factors that influence drywall finishing costs: Room size: Larger rooms have more drywall to finish.

How do you quote drywall labor?

How to Calculate Drywall Costs
  1. Drywall material costs formula: Number of required materials X Sales Taxes = Total Material Costs.
  2. Drywall labor costs formula: Income (per week) / Number of Billable Hours = Hourly Labor Rate.
  3. Use the below formula:

How much do drywallers charge for labor?

Hiring a local drywall installer will cost $1 to $2.10 per square foot, totaling $690 to $2,200 on average. Complex installations, such as those with curved walls, high ceilings, or intricate architectural details, require more time and expertise, increasing labor costs.

5 Rules for Pricing Small Drywall Jobs!

How do people charge for drywall?

Measure By Square Footage:

The standard drywall service charges range from about $0.24 – $0.70 per sq. ft. discluding the labor markup. The price that contractors charge for drywall installation ranges from $1.50-$3.00 per square foot.

What is the going rate for hanging and taping drywall?

Drywall installation costs $1.50 to $3.50 per square foot of wall surface or $30 to $70 per sheet, including labor and materials for hanging, taping, and finishing. The cost to install a drywall ceiling is $1.50 to $3.80 per square foot. Hanging drywall costs $0.85 to $1.90 per square foot without taping or finishing.

What is the rule of thumb for drywall estimating?

Rule of Thumb: Estimate approximately 1 sheet of drywall (4 ft x 8 ft) for every 32 to 48 square feet of wall surface. For paint, estimate 1 gallon for every 350 to 400 square feet of wall area.

How much do drywallers make per sheet?

For example, your drywalling contractor will come by and take measurements. He'll figure that the job will take 30 sheets. At around $50 a sheet the job will be $1500. This includes him delivering, installing, taping and finishing.

How to estimate a demolition job?

To develop a competitive demolition estimate, remember the following formula: Cost Estimate = (V x ROP x COP) + DC – SC. In this formula: DC = Direct Cost; SC = Salvage Credit; V = Volume of Material to be Demolished and Removed from the Project; COP = Cost of Production.

What's the difference between drywall and sheetrock?

One key difference between the two is that sheetrock is a brand name of drywall made by the United States Gypsum Corporation. Another difference lies in their production process; sheetrock has a slightly denser core than drywall due to the addition of a small amount of wood fiber to the gypsum core.

How long does it take to replace drywall?

The entire drywall repair process usually happens over the course of a few days to give everything time to harden and dry properly. The labor itself usually takes 1-4 hours for patching a few smaller holes and up to a full work day to replace an entire sheet.

How do you bid a sheetrock job?

How to Bid on a Drywall Job
  1. Choose the right project. Before quoting a drywall project, you must know the best projects to bid for your company. ...
  2. Review bid documents or make a site visit. ...
  3. Perform a quantity takeoff. ...
  4. Price your materials and supplies. ...
  5. Estimate labor. ...
  6. Add overhead and profit. ...
  7. Write your proposal.

How much should I charge to demo drywall?

Drywall. Removing drywall from ceilings and walls runs $0.50 to $1 per square foot. Taking out a wall costs anywhere from $300 to $1,000, depending on size, insulation type, and weight. Load-bearing walls or walls connected to foundational elements of the home fall on the more-expensive end of the price range.

How much does it cost to fit drywall?

The average cost for installing drywall will be anywhere between £540 and £920. Ready for a quote? We have a range of drywall fitters ready to offer you a free quote! This guide covers everything you need to know about the cost of drywalling a house.

How to charge a drywall job?

Total in Sq. Ft. If this is a simple job with multipurpose drywall, you can estimate what to charge by multiplying $2 per square foot – the national average – by the total square footage in the room.

How much is labor per sheet of drywall?

Cost of Labor (per sq. ft.) With the cost of material, the total cost range to install drywall is between $1.50 and $3.50 a sq. ft., depending on the job type and size.

How much does labor cost to mud and tape drywall?

The average cost to finish drywall is $1.50 to $3.50 per square foot for labor and materials. The cost to tape and mud drywall is $0.35 to $1.10 per square foot and is typically included with finishing. Finishing drywall in a 12' x 12' bedroom costs $580 to $1,800.

What is the rate for drywalling?

Drywall might be the best option for you. It's cost-effective, versatile, and quick to install. On average, drywall installation costs between R350 and R800 per square metre.

How do you estimate drywall and taping?

Drywall sheets are typically 4 feet wide and 8, 10, or 12 feet long. Divide the total square footage of the room by the square footage of a single drywall sheet to determine the number of sheets needed. Round up to the nearest whole number to ensure you have enough drywall for the job.

How much does a box of drywall mud cover?

Coverage Area: 375 Sq. Ft.

How do you quote a drywall hanging job?

The first step to pricing a drywall job is to ensure you understand all the costs and expenses included in the job. This includes drywall, mud, screws, tape, and other supplies. Labor costs should also be included when estimating how much it will cost for the job.

What do drywall finishers charge?

Finishing drywall generally costs about $1.00 to $2.50 per square foot. The factors that impact the cost typically include drywall types, the soundproof properties of the drywall you select, different sizes of drywall, and labor costs.

How much does it cost per square foot to repair drywall?

The average cost to repair drywall is $609, ranging between $294 and $924. Some contractors charge between $50 and $75 per square foot. Similar work will cost between $60 and $90 per hour if the contractor charges hourly.

Previous article
What is quartz weakness?
Next article
How do I calibrate my thermometer?