For clarification, (1) 12×12 tile covers 1 square foot. And the term “12×12” actually refers to the length and width of the tile in inches. So a 12×12 tile is 12 inches in length by 12 inches in width.
As a rule, floor tile is typically 1/2-inch to 3/4-inch thick. Wall tile tends to be thinner and available in squares (3 inches to 6 inches). Mosaic tiles are usually the smallest tile, available in 2-inch squares. The most popular and readily available tile sizes are (in inches) 12 x 12, 16 x 16, 12 x 24 and 18 x 18.
They aren't actually 12×24 inches
In fact, the vast majority of “12×24” tiles are measured using the metric system, which almost the whole rest of the world uses. Therefore, the metric measurements are 30cm x 60cm. This converts to 11 13/16ths x 23 5/8 inches.
Tiles are commonly referred to by their "nominal" sizes which might not be the "true" measurement of the material. An example of this is when a 12" x 12" porcelain tile has a "true" measurement of 11-7/8" x 11-7/8".
Tile Sizes & Shapes
The tried-and-true 12” x 12” tiles are still popular, but tiles are tending to be larger and larger.
1-foot square tiles may be among the top contenders for the most popular tile size. This option is very commonly used on floors, especially in bathrooms and kitchens. You'll also find 12-inch tiles in entryways and living areas.
Slight variations in tile sizes have long been a standard factor of the tile manufacturing industry with tiles in specific collections and even batches varying in size by a few millimetres in length or width. This is not a fault in the tiles.
To do that you take the total area of the tile and divide it by 144 (the number of square inches in a foot). So, for example, if you have a tile that is 24” x 24”, you'd first add the ⅛” grout line to both sides so that it comes to 24.125” x 24.125”. Then, you'd get the total area (length x width): 582.02”.
Estimate the number of tiles you need by determining the square footage of the area you're tiling plus the square footage of each tile. For example, if you're adding a tile floor to a 100-square-foot bathroom, and each tile is 12″ x 12″ (one square foot), you'll need about 100 tiles.
Larger Tiles Make Small Rooms Appear Bigger
Because grout lines are thinner and fewer as part of the layout, smaller rooms appear bigger when using larger tiles. Large-format tiles make floors look more streamlined – therefore, creating the illusion of more space.
We now have numerous sizes of tile available up to 24″ and sometimes even larger. One easy way a homeowner can make their room appear larger is to select a larger format tile. A 16″ or 18″ tile will generally give a room a larger feeling than a 12″ tile.
Yes, 12 inches by 12 inches area equals one square foot. To verify this value: Keep in mind that 12 inches = 1 ft .
According to experts, it takes a beginner about 16 hours to lay ceramic or stone tiles in an average room. A person with intermediate skills takes about 12 hours and experts, such as our Lewisville professionals at Pro Flooring, take about 10.
Ideally, your grout joints would be 1-3mm. Often we see 1mm grout joints between wall tiles and 3mm grout joints between floor tiles. Not only does it look better to have smaller joints, it also can minimise issues.
Misconception #2: “Large format panels are more fragile and therefore, more likely to crack.” In reality: With proper installation, tiles that are larger in size are no more likely to crack than their smaller relatives. You see, the risk of error with large format isn't in the tile itself, but in who is installing it.
While larger tiles may cover more area than small tiles, they are harder to install, requiring two people to carry and a solid technical understanding of tiling. These challenges mean they are more time-consuming to lay, so your tiler may charge extra for them.
Easy Maintenance for Busy Households
Additionally, large format tiles are less likely to chip or crack than smaller tiles. This means that they can withstand heavy foot traffic and are less likely to show signs of wear and tear over time.
Large tiles can't flex over raised areas or dips in the subfloor like smaller tiles can. If the substrate is not perfectly level, using large tiles can result in lippage, which is when the edge of one tile is higher than an adjacent tile.
We recommend using tiles no larger than 4 inches in diameter making our sheeted mosaic tiles the best option underfoot in the shower. The smaller tile will require more grout lines and more grout means more traction.
The straight lay pattern is the most common and straightforward tile pattern. Tiles are laid out in a straight line, with each row being offset by half the length of the tile. This creates a uniform, clean look that works well in modern, minimalist, or traditional spaces.
Classic White
White is a classic choice that doesn't go old. While it can be tempting to gravitate to fixtures in trendy colors, keep in mind that these can become dated quite quickly.
The large surface area makes the space look cleaner, and avoids the checkerboard look of regular sized tiles. Large format tiles can be used both for traditional style bathrooms and kitchens and more modern sleek styles too. They are good for a minimalist streamlined look, and add a timeless accent to your room.
GREY FLOOR TILES
Grey indicates and shows your neutrality and balances both vibes of your space. Nowadays, Grey becomes the most popular for flooring and it is an ideal choice for the modern era.