The drapery hook is a hook designed for hanging drapery. It is often concealed within the drape's header tape The distinctive shape shown in the figure, with a sharp end and a blunt end, was patented by James William McGhee (1882–1968) in the 1920s.
Curtain hooks help you create the perfect curtains and look for your window. They're not only aesthetically pleasing but can help you determine the best length for your curtains. You can hang them high, for example, so that your ceilings look taller.
Curtains with tabs, ties, rod-pocket, or grommet headers slide directly over the curtain rod and do not require hooks. Except for rod-pocket headers, which cover the rod, a decorative rod is needed because it remains visible whether the curtains are open or closed.
The exclusive Velcro ® Fastening System consist of two mating components: hook and loop. The woven hook tape consists of minute, flexible "hooks" which engage with a mating loop tape comprised of small, soft "loops." When pressed together, the resulting closure is adjustable, highly secure and light proof*.
Insert the pointed, straight portion of a drapery or curtain hook at the base of the seam, into the fabric, so that it slides into the hemmed portion. It should not poke out through the front or top of the panel. Space the hooks eight to nine inches apart, and place one on each end.
As a general rule of thumb, the heavier the fabric, the heavier or sturdier the hook should be. If you're using a heavy to mid-weight fabric, metal curtain hooks or brass curtain hooks will be the most suitable choice. If your fabric is lighter, something like cotton for instance, you could use plastic curtain hooks.
Measure horizontally from the top, inner corner of the window frame to the end of the curtain rod. If the rod has decorative, capped ends with finials, measure to where the outer edge of the curtains stops on the rod. Tie-back hooks should fit just inside the outer edge of the curtains.
Loop Curtains
These curtains are made up of premium quality fabrics that do not wear down through continuous friction with the rods.
Put up Curtains: Slide the rod into the brackets and add the rings onto the rod (if using). Attach drapery hooks to each pleat of the curtain & each end of the curtain (if needed). Then slide the curtains onto the rod (pocket style curtains) or hook the curtains to the rings (pleated style curtains).
Poles and Blinds explains that curtain hooks come in two types of material. They're either plastic or metal. Most of the plastic curtain hooks are the type that snaps together in large rings. Plastic rings are good for light to medium weight curtains but not suitable for heavy draperies.
A curtain heading is the top piece of the curtain that attaches to the curtain track or rod. The heading style you choose can dramatically change the overall look of your finished curtains and will influence the type of rod or track you can use.
Pencil pleat curtains are …
Pencil pleat curtains are a classic. Folds of fabric are tightly gathered to create a semi-cylindrical heading that resembles a line of pencils. From the close pleats of the header, the fabric tumbles freely to the floor. You can choose pencil pleat curtains for either poles or tracks.
Pinhooks can give you the custom-pleated look you want without the wear and tear on your wallet that nobody wants. The best news is that with a little ingenuity, pinhooks can be used with rod pocket curtains and a curtain rod, sparing you the expense of the more traditionally-used traverse rod.
When using drapery hooks, you have to make sure the hook does not go through to the front of the drape. You only want it to grab the back tab or lining. Thread the hole in the ring through the hook to attach.
One of the simplest ways to put hooks onto a curtain panel of any kind is to simply pin through the top of the curtain header. There are pieces of fabric constructing the top hem, put your pin hook through the back piece of fabric only, and it will conceal the hook and will not be visible.
One ring goes at each pleat to hang the panels securely. For flat panels, you usually need one ring for every 4 to 8 inches of curtain rod length. Heavier drapes need more rings that are closer together, while lightweight fabrics are usually fine with rings every 7 or 8 inches.
Many people believe that pencil pleat curtains are old-fashioned when compared to eyelet curtains, which have ringlets incorporated into the fabric itself - but this is far from a blanket rule. Pencil pleat can look just as stylish as eyelet curtains in a contemporary apartment or new-build house.
Rod pocket curtains, also called pole top or casement curtains, are a classic, and classy, way to hang drapery. A casing sewn onto the back of the curtain panel at the top allows the rod to slip through unseen. Panels bunch in gathers on the rod for a soft look with clean lines.
Where to put curtain tie backs. The rule of thumb here, as with hold backs, is to position curtain tie backs a third of the way up from where the curtain ends. So, you would take the full curtain drop length, divide by three and position one third of the way up from the bottom.
Eyelet curtains or Ring Top curtains are a contemporary curtain heading for use with curtain poles. Eyelet heading gives large even soft pleats and are so called because they have metal rings at the top of the curtain in place of a normal header tape.
Pencil pleat curtains can be hung from a track or a pole.