Door reveal refers to the portion of a cabinet frame left exposed after the door is attached. The size of your reveal is determined by the size of your doors in relation to your cabinet case frame.
Take the width of a rail in the middle of the cabinet. My example cabinet has a 2 1/4" wide rail. Take this 2 1/4" wide rail and subtract 1/4" to account for the reveal needed between the doors and drawer fronts.
In carpentry, a reveal is a feature resembling a rabbet, but constructed of separate pieces of wood. A reveal may typically be seen at the edge of a door or window, where the face molding is set back, often by a distance from 3/16" (5 mm) to 1/2" (12 mm).
Reveal (of a cabinet door when using European style hinges) – The reveal is the gap distance between the edge of the cabinet door and the edge of another door in the case of back-to-back doors. It can also be the gap distance between the edge of the door and the face frame in the case of inset doors.
I use 1.5mm reveal on sides (3mm between doors), 0mm on the bottom and 3mm on top. I have not encountered any binding with hinges 4-5mm from the edge of the door. From contributor O: I like contributor J's idea of 4mm between doors.
A Full Overlay door will overlay that same 1.5” face frame 1.25”, leaving a ¼” reveal on the sides (stiles) and bottom (rail).
A "true" full-overlay door style leaves roughly a 1/8" clearance on the left and right edge with 1/4" reveal top and bottom. Often when referring to full-overlay many manufacturers have a 1/4" reveal on the left and right which is most common.
The term flush-overlay as used in cabinetry can refer either to the doors or to the drawers. The term describes the way in which the doors and drawers get fitted together with the functional hardware elements and the frame of the cabinet, as described at the Remodeling 101 and the Perfection Cabinetry websites.
These are used for furniture doors (with or without self-closing feature, and with or without damping systems). They are made of two parts: One part is the hinge cup and the arm, the other part is the mounting plate.
is that jamb is (architecture|interior decorating|finish carpentry) the vertical components that form the sides of a door frame, window frame, or fireplace, or other opening in a wall while reveal is the outer side of a window or door frame; the jamb.
Reveal trims are used to finish wallboard terminations when the board abuts other building materials such as suspended ceilings, beams, plaster, masonry and untrimmed door and window jambs to create a clean step inset or reveal.
In architecture, the term 'reveal' refers very broadly to the inner surface of an opening or recess in a wall, typically in relation to a window or door.
Partial overlay cabinets cover most of the cabinet frame but leave space between the drawers and doors. This is typically the least expensive cabinet option and is a top choice for people who want to leave off hardware. Full overlay leaves no space between each door/drawer and thus requires hardware.
Another way to look at door overlay: If your door is 30″ wide and the opening is 28″ wide then then you could calculate your overlay as 30 minus 28 divided by 2 equals 1″. Divided by two because the overlay is measured on one edge, the hinged edge of the door.
1/2" overlay hinges are the most common overlay of cabinet hinge. These are used in face frame cabinets where the door covers a 1/2" of the face frame all the way around the cabinet door. 1/2" overlay hinges are the most common overlay of cabinet hinge.
Butterfly hinges, also called surface mount cabinet hinges or dovetail hinges up, attach to the outside of cabinet doors so the entirety of the hinge is visible when the door is closed. Butterfly hinges are so named because of their ornamental, mirror-image leaves, or wings.
What Is A Hinge Knuckle? A hinge knuckle is the hollow circular part at the joint of a hinge through which a pin is passed. The knuckle can also be called a loop, joint, node, or curl, but knuckle is the most common name.
Also known as a pintle, a pin is a narrow cylindrical-shaped plug that's placed through the hollow center of a hingle's knuckle. The protrusions on a hinge's leaf are hollow. Therefore, the knuckle they create is hollow as well.
Since they are not set inside the cabinet frame, full overlay provides the greatest amount of storage with ample room for items such as pots and pans. Double doors in full overlay style come without the vertical stile on the face frame which allows for even better storage capacity and easier access of stored items.
The Pros of Full Overlay Cabinets
They're a good alternative to inset cabinets for tighter budgets. More Storage: Because the doors are mounted on the face frame instead of inside it, there's more room to squeeze large items through the opening than in inset cabinets.
The standard overlay is the most commonly found kitchen cabinets with doors covering the entire front surface. This design allows for more storage space as it covers up what would otherwise be wasted space between cabinets and offers an overall cleaner appearance.
Is Full Overlay the Same As Frameless? Full overlay cabinets still show approximately 1/4-inch reveal of the face frame while frameless cabinets do not show a frame reveal.
If your cabinets are designed for full overlay, it means that the doors completely overlap the opening on all four sides. The correct determination for full overlay is typically 3/4 inch on all sides.
The concept is simple - the face frame is eliminated and just the box remains. The doors are attached directly to the sides of the cabinet box for a clean, modern look. Without the frame, frameless cabinets rely on a thicker box for strength and stability.
A full overlay hinge is a type of European hinge with a completely straight arm which makes the offset much greater than partial overlay or inset hinge styles. This allows the door to completely overlay the cabinet box. Use these for full overlay doors.