Rubbing Alcohol or Vodka
If you want to know how to get sticker residue off plastic, wood, or glass, rubbing alcohol is an effective solvent that's safe for most surfaces. Vodka is a good substitute. Wet a paper towel or clean rag with rubbing alcohol, and rub the residue to lift it off.
If you've ever wanted to know how to remove super glue quickly and easily, just reach for the can of WD-40 Multi-Use Product you probably have in your cupboard. Simply spray it on, wait a minute to allow it to penetrate the adhesive, and either scrape the sticker off or wipe the residue away with a soft cloth.
Bottom line — if you need an effective yet gentle formula to remove adhesive and sticky messes around the house, Goo Gone is your best bet. If you have a tough household job or need adhesive remover for pro-level jobs in the workplace, Goof Off's more potent formula is a better option.
Grip the shelf paper with one hand, pulling the paper upward and back over itself to peel it away. Spray water where the paper meets the shelf to loosen the adhesive as you pull the paper, continuing until the shelf paper comes off.
Sentinel 626 Vinyl Adhesive Remover is a biodegradable formula that is designed for removing latex, acrylic, and pressure sensitive adhesives from a variety of surfaces. Available in a gallon size. Sentinel 747+ Adhesive Remover is an environmentally sound choice.
In addition to preventing bugs from hitting your vehicle, WD-40 is also a great option for removing already stuck-on bugs, bird droppings, tree sap, and grime. It won't damage your paint; just remember to rinse it off with soap and water afterwards.
4.0 out of 5 stars Works the best of all, but takes some physical effort. The can says "auto" on it. The best so far for a project restoring old and very messy auto rims. Don't bother with 3 M general purpose adhesive remover - it isn't strong enough for the insides of wheel rims.
Since WD 40 repels water, first wipe away as much as you can with a cloth or paper towel. Then you can wash the rest away with a very soapy liquid like straight dish washing detergent or shampoo. Use it at first without diluting it with water.
WD-40. Use a rag with a bit of texture to it — for example, terry cloth as opposed to an old t-shirt — and soak a small area of it with WD-40, then scrub at the residue. If there is a lot of residue, you can spray the residue and let it sit for just a minute before scrubbing.
Submerge jars in water and let them soak for 20-30 minutes. Remove jars from water and easily remove labels. For sticky label glue that won't come off, mix together equal parts oil and baking soda in a small bowl, then rub onto label glue and scrub with a dish rag or scrub brush.
There are many different types of plastic, but there are two kinds that you should avoid using WD-40 on—polycarbonate and clear polystyrene plastic. Polycarbonate is a transparent plastic that is commonly used in greenhouses, and polystyrene is typically used for styrofoam and soft drink lids among other items.
"WD" stands for "water displacement," which is what the product does -- it acts as a buffer between a surface and water. Because of this, water is not usually an effective way to clean up WD-40.
Ingestion: This product has low oral toxicity. If swallowed, this material may cause irritation of the mouth, throat and esophagus. Swallowing may cause gastrointestinal irritation, nausea, vomiting, diarrhea, dizziness, drowsiness and other central nervous system effects.
Goo Gone Pro-Power dissolves even the toughest stains and sticky messes. Goo Gone Pro Power is safe on finished wood, painted surfaces, glass, fabric, metals, plastics, ceramic/ porcelain, brass, chrome, fiberglass, grout, and perfect for cleaning tools!
No matter how careful you are with your car, a scratch or scuff mark is going to appear. While WD-40 Multi-Use Product cannot help in situations where the metal has been damaged, it can help with scuff marks, where another car has come into contact with yours and left some paint residue.
Is Goo Gone Automotive safe to use on car paint? Yes! That's what it's designed for, just wash with hot, soapy water after you're done using the Goo Gone.
Dampen a cotton ball or rag in acetone or nail polish remover. Dab it on the glue until it starts to soften. (White vinegar may also work.) Wipe away or scrape away the softened glue with rags and a plastic scraper.
626 cleans up with water, is non-hazardous, and requires no dilution, so it's ready to use.
If scraping and hot water don't do the trick, there are a number of eco-friendly mastic removers you can use formulated specifically for removing old adhesive from concrete floors, such as GlueRemove from Surecrete and Blue Bear Mastic & Adhesive remover from Franmar (a soy-based solution).
For easy clean up, add absorbent to the liquefied adhesive, place in a disposable container and dispose. Follow all local, state and federal regulations when disposing of waste. Step 3: Wash and rinse the sub floor thoroughly with Sentinel 810 All Surface Floor Cleaner to ensure a clean surface.
Patients who suffer from arthritis are trying anything to relieve those stiff and aching joints.
WD-40® Multi-Use Product protects metal from rust and corrosion, penetrates stuck parts, displaces moisture and lubricates almost anything. It even removes grease, grime and more from most surfaces.