Vinegar is the go-to natural cleaner when faced greasy cabinets. Mix a 50/50 solution of vinegar and warm water and pour it into a spray bottle. Mist on cabinets, let sit for a minute or two and then wipe clean with a soft cloth.
Use 50% water and 50% distilled vinegar for a streak-free look. If your kitchen glass cabinet has wooden mullions, then do not spray the distilled vinegar directly on the surface. Instead, spray onto a cloth and gently wipe.
Mix up a few drops of dish soap (not dishwasher detergent) in a bowl of warm water until soapy. Use a sponge dipped in the solution, but not dripping wet, to gently work the grease and grime out. Follow up with clean water to remove lingering dish soap. Dry the surface thoroughly with a dry microfiber rag.
Mix equal parts of white vinegar and hot water in a 5-gallon plastic bucket. Add a few drops of olive oil to the mixture. The vinegar and hot water help to disinfect your cabinets, while removing grease and grime. The olive oil provides a subtle shine.
Murphy® Oil Soap gets deep into grime to break up dirt particles and it's safe to use on wood products like cabinets.
Create a cleaning solution with 1-part baking soda, 2 parts warm water and the lemon juice. Add the solution to a spray bottle and spray the liquid onto the kitchen cabinets. Leave for 2-3 minutes, allowing the baking soda to work its magic. Use the soft sponge to gently scrub the grease away.
Mix 1 cup of water, 1 teaspoon of white toothpaste, and 2 tablespoons of baking soda. Use your finger or a spoon to mix it well. Dip a sponge in the mixture and scrub down your cabinets. Rinse with a damp cloth until all residue is gone.
Related Articles. The sticky residue found on your kitchen cupboards is usually caused by cooking grease and dirt, but it may also be the residues left by some cleaners. No matter what its source, a sticky residue is unappealing and damaging to your kitchen cabinets.
Dilute ¼ cup of Pine-Sol® in one gallon of warm water. Dampen a sponge in the mixture, wring out so it's just damp to wipe away grease, grime and dirt. Optional: Scrub stubborn messes or stains with full strength Pine-Sol®, using a sponge or soft cloth. Finish by rinsing with water and wipe kitchen cabinets dry.
If the cabinet surfaces still show stains and dull spots, they can be spot-treated and polished with baking soda and vinegar. Spray on a solution of 2 parts water to 1 part vinegar and polish; rinse with water and buff with a clean, dry cloth.
A water-based all-purpose cleaner is generally safe to use on laminate cabinets if you need a little more power than plain water. You can also use liquid hand soap or dish detergent to clean the surfaces. After cleaning the laminate with any cleanser, go over it with a clean cloth to remove the remnants.
Vinegar: Although vinegar is a fantastic natural disinfectant, it's also an acid. If used undiluted or mixed with water, it can ruin a wood's finish on contact.
After wetting your brush with warm water, add a little baking soda, then scrub away on the cabinets. Follow with a damp, warm cloth to remove the residue. Not only will the baking soda cut through the grease, but it's also non-abrasive, so it won't harm your wooden cabinets.
For a wood coated with a hard surface, like wooden furniture, Windex is completely harmless. If it is sprayed on and kept dry, it will leave a water spot, which could be cleaned off. It won't damage your furniture when used as a cleaner.
Pine-Sol® is not recommended for use on marble, aluminum, or unsealed, waxed, oiled or visibly worn wood.
Clorox Pine Sol Cleaner/Disinfectant/Deodorizer/Degreaser of 144 ounce capacity degreases and cleans all types of hard surfaces. Cleaner featuring heavy duty pine oil is used to fight against dirt and grease.
A mixture of 1 part Chlorine Bleach, (Clorox) to 32 parts water (½ cup bleach per gallon of water, or 4 teaspoons bleach per quart of water) will need to sit on surfaces for 5-10 minutes in order to disinfect them. We found this did not harm either of our wood finishes.
When you're doing a DIY woodworking project, it's a good idea to start with a fresh, clean surface. But whatever you do, if you're working with untreated wood, don't use a Clorox wipe to clear off dust and dirt. Because untreated or unpainted wood is porous, disinfectant wipes can leave it with a big, ugly stain.
Fill a spray bottle with 2 cups water, 1 cup white vinegar and about five drops dish soap if the wood is soiled. The vinegar disinfects and the dish soap works as an added cleaning element.
You can clean polished wood or non-porous hardwood floors with Lysol® . If you're just looking to – you can use Lysol® All-Purpose Cleaner to clean and disinfect your floor surface without causing damage to the wood.
What is this? Pine-Sol is more acidic than Fabuloso, which gives it an advantage in breaking down stubborn stains and complex messes caused by grease. Pine-Sol Original is the only liquid cleaning solution that disinfects.
Pine-Sol vs Bleach
Bleach is great at disinfecting and whitening toilets, tubs, clothes, and sinks. On the other hand, Pine-Sol is used to break down grease and clean household floors. Still, each of these products should be used separately. That way, the fumes produced do not react to create toxic chlorine gas.