Bypass/muni ball plugs are used for testing and monitoring pipe systems. Some bypass plugs are designed to handle high back pressure in applications such as water mains, force mains, and industrial lines. A Muni Ball has a bypass tube running through the plug that allows the user to bypass effluent through the tube.
Many refrigerators have built-in water filtration that filters sediment and contaminants from the water going to the dispenser and/or the icemaker. If you do not need or want to use the water filter, a bypass plug must be used in place of the filter.
Without the filter installed, the water skips the filtration step and goes straight to the ice maker or water dispenser. Some refrigerator models require an extra part, called a bypass plug, for the water to skip the filtration step. However, some refrigerators do not need this part.
The bypass switch monitors the status of the links between its monitor ports and the in-line appliance. If a link goes down, the bypass switch immediately switches into bypass- mode. Some manufacturers of bypass TAPs/switches still send traffic to the appliance during bypass mode.
A bypass connection, or “Flow Through Connection” is a pipe that passes entirely through the plug, from one end to the other. It can be used for filling the piping to be tested with air or water. It can also be used to bypass the water flow and discharge it to another line connected to a pump.
A bypass line is most commonly used when there's an issue meeting the minimum flow requirements, and/or for protection against deadheading the pump. A minimum flow bypass, or recirculation, line can be configured many ways.
The primary function of a bypass valve is to redirect flow around a particular component or section of the system. This is useful in applications where continuous flow is needed while allowing a portion of the fluid to bypass a specific area (such as a filter or heat exchanger) when it is not in use or needs servicing.
A bypass is like a detour for your blood to use to get around an obstacle. Creating that bypass involves taking a blood vessel from somewhere else in your body, such as your leg, arm or chest, and using it to craft the detour around the blockage.
In networking, a bypass-switch (or bypass-TAP) is a hardware device that provides a fail-safe access port for an in-line active security appliance such as an intrusion prevention system (IPS), next generation firewall (NGFW), etc.
What is the purpose of a bypass? If a utility worker needs to remove a meter to inspect it or replace it with a new meter when the power needs to stay on in the structure, they can apply or activate the bypass, which allows the house or building to remain energized while the power has been rerouted away from the meter.
The drain hole is a small opening located at the back of your fridge's freezer compartment. Its primary function is to allow water generated from defrosting to drain out of the fridge and into the drain pan.
In any scenario, with a GFCI outlet connected to a GFCI circuit, there is a high chance for an inadvertent power loss to the appliance.
Is it safe to unplug the refrigerator? The answer is no. The temperature of a refrigerator needs to be maintained at a certain level, and if you unplug it, the temperature inside drastically changes leading to many problems.
Whereas a portion of the stomach is removed in duodenal switch surgery, gastric bypass is instead designed to divide the stomach, creating a smaller gastric pouch.
The Lever bypass is incorporated into the design of the meter socket. It includes a lever arm with 'blades' on the meter socket to bridge(or connect) between the line and load side meter jaws of the socket and includes a jaw release for easy removal of the watt-hour meter.
It means that processing of audio by effect plugins will be ignored. You'll have dry (unprocessed) sound exported.
To specify that all connection events (inbound and outbound) related to specific TCP/IP ports can be established without CA Access Control authorization, you can define a bypass for these ports. Bypassing these ports reduces system load and speeds event processing.
This machine is a cardiopulmonary bypass machine, or a heart-lung machine. This machine takes over the jobs of your heart and lungs. These jobs include adding oxygen to your blood, removing carbon dioxide from your blood and then pumping this refreshed blood back into your body.
Bypass blocks are mechanisms that skip over repeated material on a webpage. They are important for users who navigate with a keyboard because as they will allow users to skip over repeated sections and go to the content they are looking for immediately.
Coronary artery bypass graft surgery (CABG) is done to treat a blockage or narrowing of 1 or more of the coronary arteries. It can restore the blood supply to your heart muscle when nonsurgical procedures are not a choice. Symptoms of coronary artery disease may include: Chest pain.
The bypass system has following functions of starting, protecting the reheater, tracking the main steam pressure, quick opening when the steam turbine trips, relief valve and fast cut back etc.
According to some aspects, the bypass circuit may be configured to short circuit the outputs of the power device, and in some embodiments, disconnect the inputs of the power converter from the outputs of the power device.
Coronary artery bypass surgery creates a new path for blood to flow to the heart. A healthy blood vessel from another part of the body is used to redirect blood around a blocked area of an artery. Usually the blood vessel is taken from an artery in the chest, called the internal mammary artery.
1. To ensure a path of flow is provided so as to not excessively throttle, or even deadhead the pump during low loads. Constant-speed hydronic systems aim to keep a relatively constant, total system flow. Thus, most loads are served by three-way control valves with an associated bypass pipe.
The bypass is normally only moved when doing maintenance, winterizing, or leaving home for an extended period of time. When in normal service, the handle should stay in the OUT position. When in normal service, the bypass handle should stay in the pulled OUT position. That means the water softener is being used.