The highest practical R-value per inch comes from closed-cell spray foam and polyisocyanurate (polyiso) rigid foam boards. These premium materials offer exceptional thermal resistance, making them ideal for tight spaces where you need maximum efficiency with minimal thickness.
Polyisocyanurate (Polyiso) and closed-cell spray foam offer the highest standard R-values per inch for common residential and commercial insulation, both typically ranging from R-6.0 to R-7.0 per inch.
R-value measures an insulation's resistance to heat flow. The higher the R-value, the greater the thermal performance. While R-30 is more insulating, it is also much thicker than R-13, meaning they are used in completely different parts of the house and cannot be directly interchanged.
R60 insulation is worth it if you live in a very cold climate (like the northern U.S. or Canada), but it is often considered overkill for mild climates. While it maximizes comfort and thermal efficiency, you will experience diminishing financial returns compared to standard R38 or R49 insulation.
Yes, R-38 is technically better than R-30 because a higher R-value means greater resistance to heat flow. However, the "better" choice depends on your climate, space constraints, and local building codes, as R-38 requires more thickness and cost.
R-30 insulation thickness varies by material, typically ranging from 8.25 to 10 inches for fiberglass batts and up to 10 to 12 inches for blown-in loose-fill. This thickness allows it to meet the strict thermal resistance standards required for attics and cathedral ceilings.
Yes, it's possible to over-insulate your attic, and doing so can create more problems than benefits. Over insulating an attic can block proper airflow and trap moisture. As a result, it can lead to mold growth, wood rot, and compromised structural integrity.
Achieving R60 requires approximately 17 to 22 inches of blown-in fiberglass, 16 to 18 inches of blown-in cellulose, or carefully layered batt insulation systems. This substantial depth demands adequate attic space and proper installation techniques.
What time of year is Insulation cheapest?
Mice are curious and always searching for safe, snug, and warm nesting sites. Attics filled with blown-in insulation provide an excellent option–from the mice's point of view. As long as there is a ready food source. Mice are omnivorous and will eat and chew on almost anything including wood and electrical wires.
Yes, you can use R-30 insulation in walls, but only if your wall framing is thick enough to accommodate its thickness. Because R-30 insulation is typically 8.58.58.5 to 101010 inches thick, it will not fit in standard 2×4 or 2×6 walls without crushing it. Compressing insulation destroys the trapped air pockets that give it its R-value, drastically reducing its effectiveness.
It is a common measure adopted by manufacturers, retailers, and even some contractors to ascertain the performance of insulation. Although R-value is important, it will not help you save on your power bills. The fact is, the energy efficiency of your home does not just rely on a number.
When balancing upfront cost and overall thermal efficiency, the cheapest and most effective standard insulation is fiberglass batt insulation. However, if you are looking for long-term savings through superior air sealing, dense-pack cellulose often provides the best overall value.
Installing more insulation in your home increases the R-value and the resistance to heat flow. In general, increased insulation thickness will proportionally increase the R-value.
Because spray foam can trap moisture, hide the condition of the roof, make it difficult for surveyors to inspect, which means risks like timber decay, dry rot, and not forgetting increased fire risk. If you've got it or you're buying a property that does, this is something you need to know upfront.
WD-40 affects foam in different ways depending on the type of foam. It is highly useful for cleaning, holding, or dissolving, but can cause permanent damage to certain materials.
Foam insulation is a common target because it's easy for them to chew through. The material offers little resistance, allowing mice to create tunnels or nests within the insulation. But mice aren't just interested in chewing for the sake of it—they're also drawn to the warmth and shelter insulation provides.
Blown-In Insulation: Costs about $1.00 to $2.80 per square foot, making it slightly more expensive than rolled insulation. However, blown-in insulation is better suited for filling irregular or hard-to-reach spaces, such as existing walls or tight attic corners.
Should I remove old loft insulation before laying new? Older insulation material will typically need to be removed before adding new insulation. However, in some cases the material may be in good condition, meaning you can simply top up the existing insulation material for a fraction of the cost of a full replacement.
Yes, it is possible to put too much insulation in your attic. While insulation is essential for energy efficiency, excessive amounts can block vital soffit ventilation, trapping moisture that leads to mold growth, wood rot, and severe ice dams in winter.
To achieve an R-30 value, blown-in insulation typically needs to be 9 to 10.5 inches thick. The exact depth depends on the material used, as blown-in fiberglass typically settles at 10 to 10.5 inches, while blown-in cellulose requires about 9 inches.
Closed cell spray foam is rigid once set. It is a better thermal insulator and was previously sold to stabilise failing roofs. But if it has been used inappropriately or installed poorly, it might put stress on timbers, restrict air circulation and put them at risk of decaying.
The 7 and 7 rule for attic conversions refers to the common requirement that finished attics be at least 7 feet wide and 70 square feet, with 7-foot ceilings over at least half. Keep in mind that this is a general guideline. Local building codes may have stricter requirements that supersede this rule.
Whole-house insulation is usually a one- to two-day process, not a long renovation. Work is staged by area to keep the project efficient: Attic insulation and air sealing.