Water around the Toilet Base
To test that a bad seal is the problem, grab a couple of towels and wipe up the water. Go on with your day, checking periodically to see if the water has returned. If the floor is still dry, chances are that the water wasn't coming from the toilet's base.
It's actually required by the International Plumbing Code to caulk a toilet to the floor, and now knowing the reasoning behind it, why would you not want to? It helps to create safety in the bathroom and even provides sanitary protection.
Toilets Flush on Their Own Due to a Leaky Seal
If no one is pushing the flush lever, a flapper seal closes the water into the tank and stops it from going into the bowl.
The short answer is, indefinitely. Wax, unlike rubber, doesn't deteriorate. Unless there's another problem with the toilet, it won't spring a leak on its own. People usually replace wax rings when they remove the toilet for some unrelated reason.
or certainly 20 to 30 years.
Besides leaking, signs that the wax ring may need replacing could be an odd odor seemingly stemming from the area where the toilet meets the floor, or if the toilet itself feels wobbly.
Why is the toilet is leaking from the base? The leak is usually caused when the seal under the toilet fails. Below you'll learn how to install a new wax gasket to create a watertight seal between the toilet and the closet flange and install a new flexible water-supply tube.
The wax ring usually needs to be replaced because the toilet is loose. The other reason why a wax ring may need to be replaced is that it has been worn down over the years and is no longer pliable. This means the seal is no longer intact. Therefore, it causes water to seep through the base.
🚽 Caulking Prevents Water Contamination
It could be water splashing out of a bathtub, mop water, water from a shower and even misguided potty training from your young boys who seem to miss the toilet bowl every single time! Without caulk around the toilet base, water can get under there and sit for a long time.
The wax ring is exactly what it sounds like: a ring made of sticky wax that helps form a watertight seal between the bottom of the toilet and the sewer pipe. It requires no maintenance and can last 30 or more years, often as long as the toilet itself. But sometimes wax rings can dry out, crumble, and fail prematurely.
There are many types of toilet seals on the market. Some toilet seals are wax-based and others are waxless. Which type of seal to use is really up to you. All of the wax style rings, waxless rings, or gasket seals will work if installed properly.
The most common place for a toilet to leak is at the wax seal. Replacing a wax seal may be as cheap as $50. Other common leak points are the tank and bowl which may cost $300 or more to repair.
The wax ring is the seal between your toilet and the sewer pipe. It's essential to have a good seal so that waste and water would not leak from the base of your toilet. If your toilet is leaking, the wax ring likely needs to be replaced. On average, it costs between $200 and $250 to replace a toilet wax ring.
In your situation, it sounds like the floor has been build up around the flange and it is lower than the floor so they have to put multiple wax rings so the toilet seals down to the flange or use the rubber extension flange. These techniques generally work.
The most common toilet leak is caused by a deteriorated flush valve (flapper) at the bottom of the toilet tank. If the flapper does not seat properly, water will leak into the toilet bowl. Often this leak will occur without being heard.
A leaky toilet might not seem like a huge problem, but the water can quickly damage the bathroom walls and floor. External leaks can cause water puddles that can damage a downstairs ceiling, while internal leaks prevent the toilet from holding water properly.
One reason for a toilet leak from the base might be a loose connection where the tank meets the toilet. Check the connecting bolts. If they seem loose or you can see water gathering in that area, use the screwdriver to tighten them. Approach the bolts from inside the tank and screw downward to create the best seal.
Water puddling where your toilet meets the floor. If you notice water pooling at the base of your toilet and don't see anything dripping from the toilet tank, there's a good chance the flange is the problem.
If the leak only occurs when you flush, it means the wax ring is eroded and needs replacing. You might need to remove the toilet from the floor to access the wax ring. Wax rings are affordable, and generic ones fit most toilets meaning there's no going wrong.
The wax ring is located underneath the toilet and is designed to cover and seal the waste pipe and toilet flange. If the wax ring isn't sealed correctly, it can cause wastewater to leak from the bottom. Leaking water can lead to mold around the floor.
It can vary depending on your location and how quickly you need it. $90-$120 is a good ballpark. If you are having other plumbing work done, they might do it cheaper, and if they have a large travel fee, you may pay closer to $150.