Stanley Steemer provides professional deep cleaning for residential and commercial properties. Their primary services include:
When you steam clean, the dirt doesn't actually disappear; the high-temperature vapor melts and dislodges it. You must physically remove the suspended grime using an attached microfiber bonnet, wiping with a cloth, or vacuuming the surface immediately afterward.
Whether you're worried about allergies or grime, vacuuming and deep cleaning your carpets is a proven way to extract microscopic particles like pet dander, pollen, dust mite waste, and dust which can quickly build up in carpeting. These nearly invisible bits of debris can trigger allergy symptoms.
Never use a steam cleaner on unsealed or hardwood floors, water-based paint, leather, delicate fabrics (like silk or velvet), porous surfaces (like marble, cardboard, or unsealed brick), and electronics. The intense heat and moisture can cause warping, peeling, cracking, and severe permanent damage.
We'll handle moving most pieces of furniture, so we only ask that you remove fragile or valuable items from the rooms being cleaned and secure your pets.
It effectively kills germs and dust mites, helping to reduce allergen levels in the home. However, the cons of steam cleaning include the potential for moisture damage to certain materials and the need for proper equipment and techniques to avoid damage.
Yes, Stanley Steemer vacuums as a built-in step of their cleaning process. Their truck-mounted hot-water extraction equipment continuously vacuums up loosened dirt and moisture simultaneously as it cleans.
Yes, you should always wipe the surface after using a steam cleaner on hard surfaces. Steam works by breaking down, melting, and loosening dirt, grease, and grime, but it doesn’t actually remove the dirt. If you don’t wipe it up, the loosened residue will simply dry back onto the surface.
Yes, a steam cleaner can effectively kill and remove mold. The high heat (usually between 200∘F200 raised to the composed with power F200∘F and 300∘F300 raised to the composed with power F300∘F) of pressurized steam instantly kills mold spores on contact and loosens them from surfaces. However, its success depends on the surface and preventing future moisture.
Here are 8 mistakes to avoid in the future!
Anti-dust mite laundry detergents and additives are specially formulated to neutralize allergens and wash away waste matter in any water temperature, making them highly effective for allergy relief without damaging delicate fabrics.
Yes, absolutely! The carpet remains a favorite for bedrooms because it's soft, warm, and quiet. Plus, new technology makes modern carpets more durable and easier to maintain than ever.
Yes, dust mites thrive in pillows. Pillows provide the perfect environment for them, offering warmth, moisture from sweat, and a constant food supply of dead skin cells.
The 20-minute rule in cleaning (often combined with the 10-minute break as the 20/10 Rule) is a productivity method where you set a timer and clean as quickly and intensely as possible for 20 minutes. When the timer goes off, you immediately stop cleaning and take a mandatory 10-minute break.
Steam mops can push dirt around if you don't sweep or vacuum first. They do not have built-in suction. The high-temperature vapor melts and lifts grime, while the microfiber pad traps the loosened dirt. If loose debris isn't removed, it will create wet, muddy streaks.
Steam helps loosen dirt, reduce odors, and help refresh fabric without relying on harsh chemicals. Yes - you can steam clean most fabric couches safely, as long as your couch upholstery code allows water-based cleaning.
Mold is generally at its worst from early spring through early fall (specifically July through October), peaking during the warmest and most humid months. Mold thrives in warm temperatures (60∘F to 80∘F) combined with relative humidity levels above 60%.
To permanently kill black mold, you must eliminate the mold roots in porous materials and fix the underlying moisture source. No chemical kills roots inside porous drywall or wood; heavily infested materials must be removed. Otherwise, use a 3% hydrogen peroxide solution or distilled white vinegar.
For most standard grout types (sanded or unsanded), steam cleaning is highly effective. It loosens dirt, kills bacteria, and removes mildew without harsh chemicals. Some epoxy grout can stand up to steam cleaning, but because it's temperature-sensitive, you may want to use a gentle cleanser instead.
Steam cleaners work well on many sealed surfaces, such as tile, grout, and certain types of sealed flooring, but they may damage unsealed wood, delicate fabrics, or heat-sensitive materials.
Yes, you should always vacuum your carpet thoroughly before steam cleaning. Removing loose dirt and pet hair first ensures your steamer can penetrate deep into the fibers and prevents the moisture from turning loose dust into a muddy, hard-to-extract paste.
Yes, you can clean baseboards with a steam cleaner. The steam melts away built-up grime, scuffs, and pet hair without using harsh chemicals. However, because steam uses moisture, you must be careful not to warp wood or MDF (Medium-Density Fiberboard) baseboards.
The most crucial post-carpet cleaning tip is to stay off the damp or wet carpet while it dries. Drying times for most professional cleaning services range from four to 24 hours or more.
Preparing for Stanley Steemer is simple: clear your floors, vacuum to remove loose debris, secure your pets, and remove breakable items from tables. Their team handles the heavy lifting, but these few steps ensure a smooth and efficient deep cleaning.