A PF (Power Failure) error code indicates that a power failure has interrupted the drying cycle.
A PF (Power Failure) error code indicates that the wash cycle was interrupted by a power failure.
PF indicates a power failure. This is the normal indication if the power to the unit is cut, and then restored, as would happen during a lightening storm, or other power failure that is restored at the switching station. To resolve this unplug the unit for a few minuets and plug it back in.
Okay - so PF is Power Failure - try a reboot first to see if you can clear the PF from the display. UNPLUG microwave from outlet - or shut off breaker to outlet - for 1 minute - plug back in or turn breaker back on and if PF clears then it was just a reset that was needed.
Possible Solutions
A PF (Power Failure) error code indicates that the drying cycle has been interrupted by a power failure. Touch and hold START to restart the dryer cycle or press POWER to clear the display.
To clear the codes, unplug the dryer for 2-5 minutes to reset the system. If the error persists after restarting, it may require more thorough troubleshooting or professional repair.
PF indicates power failure: First leave the unit unplugged for about 30 minutes as this will help to reset the unit. If it still doesn't work, then you need to make sure that the plug the dryer is plugged into is a good 240 current, as it may not be getting enough voltage to run the dryer.
A PF (Power Failure) error code indicates that a power failure has interrupted the drying cycle. Touch and hold START to restart the dryer cycle or press POWER to clear the display.
There has been a power failure or the clock time has been turned off. When power is first supplied to the microwave oven, a colon ( : ) will blink in the display. Touch the "Cancel/Off" or "Cancel" key (depending upon model) to stop the blinking.
The oven will display “PF” when it is powered up for the first time or has experienced a power failure. It can be cleared by pushing cancel or interacting with any button or knob. If a cooking function was in process, dispose of food; it might not be thoroughly cooked.
PF. The PF error code means there was a power failure. This may have been caused by a power outage or a power spike. You can usually resolve this error by pressing the Cancel or Clear button.
The error code "PF" means reversed polarity, low voltage, or improper ground path. The first thing I would do would be to measure the applied voltage to the heater and see what voltage the heater is being supplied.
A Provident Fund (PF) is a government-managed retirement savings scheme designed to provide financial security for employees upon retirement. It intends to help working individuals save a portion of their salary for retirement.
In the event of a power failure, your unit will display Power Failure or PF. Simply acknowledge the alarm (once power is restored) by pressing “Alarm Reset”. The refrigerator will then resume normal operations.
If the PF error is due to a brief power outage in your home, fixing the issue should be extremely simple. Try pressing the “off” button on your touchpad, or the “clear” button. If the error code immediately clears, you can resume using your microwave again as normal.
If there is a power failure to the electrical supply to your home, when the power comes back on, you may see a "PF", "888" or "8888" code in the display on your Microwave Oven. Depending upon the model, one of these codes will appear in the display to indicate that the power failure has occurred.
Possible Solutions
A PF (Power Failure) error code indicates that a power failure has interrupted the drying cycle. Touch and hold START to restart the dryer cycle or press POWER to clear the display.
Power Factor (PF) is the ratio of working power, measured in kilowatts (kW), to apparent power, measured in kilovolt amperes (kVA). Apparent power, also known as demand, measures the amount of power used to run machinery and equipment during a certain period. It is found by multiplying voltage (V) by current (A).
The PF Error code indicates that the unit has experienced a power failure during operation.
Answer: The "PF" error code stands for Power Failure. This code is not an actual error, but rather a notification to let you know that there was a power outage during the wash or rinse cycle. In most cases, this issue can be resolved by simply restarting the machine after the power returns.
Often, dryers are equipped with a reset button on the control panel. If the motor won't run, let the dryer cool for about ten minutes. Then press this reset button. If the dryer still doesn't operate, check for an overload protector on the motor.