As a result, having a local plumber replace your toilet's wax ring can be anywhere from $75-250 depending on the cost of the trip charge and whether anything else is discovered in the process that needs fixing.
or certainly 20 to 30 years.
Besides leaking, signs that the wax ring may need replacing could be an odd odor seemingly stemming from the area where the toilet meets the floor, or if the toilet itself feels wobbly.
When it works properly, the wax ring creates a watertight seal between the toilet base and the drain pipe. Unfortunately, wax can fail over time, leading to water leaking onto the floor. The good news is that popping on a replacement wax ring will fix the problem.
The first sign of a bad toilet ring is water forming around the base of the toilet. To test that a bad seal is the problem, grab a couple of towels and wipe up the water. Go on with your day, checking periodically to see if the water has returned.
🚽 Caulking Prevents Water Contamination
It could be water splashing out of a bathtub, mop water, water from a shower and even misguided potty training from your young boys who seem to miss the toilet bowl every single time! Without caulk around the toilet base, water can get under there and sit for a long time.
The only-when-flushed toilet leak could be caused by loose mounting bolts or a worn-out wax gasket while the all-the-time leak could be caused by a loose water supply line connection, a problematic water shutoff valve, or a faulty seal between the toilet tank and its base.
Wax-free toilet seals are made out of a heavy duty rubber, so they're flexible enough to shimmy into the flange without smearing a wax ring. Wax-free seals can also be reused. As long as they're still attached to the bowl in good condition, you can reinstall the toilet without replacing the seal.
If the wax ring isn't sealed correctly, it can cause wastewater to leak from the bottom. Leaking water can lead to mold around the floor. A poorly sealed wax ring can also cause foul odors to stink up your bathroom. If you smell sewage or see water leaking, then you may need a new wax ring.
An improperly installed wax ring may leak. Perhaps the installer used a ring that wasn't thick enough, or perhaps the flange is high enough to lift the toilet off the floor and make it rock. Once water begins seeping through a compromised wax ring, it won't stop. It doesn't take standing water long to rot a subfloor.
Apply the mineral spirits with a rag and scrub gently to remove the wax residue. Always use care with mineral spirits as it is flammable. If you don't have mineral spirits on hand, check in your garage for a bug and tar remover or Goof Off Heavy Duty.
Here's what to know. Every toilet in your home has a wax ring connecting it to your plumbing, which creates a waterproof seal to keep what goes down to the sewer from seeping out the sides. This piece of equipment usually lasts as long as the toilet, about 30 years.
In order to prevent problems with your new wax ring, it is helpful to know what commonly causes problems with this important little gadget. First and foremost, a loose toilet will often cause a wax ring to lose its seal and leak.
A regular wax ring is all you need if the flange is set on top of the finished floor. Oatey® Heavy Duty Wax Bowl Ring can be used to set any floor type closet bowl. A thicker wax ring is used when the flange has already been set on the subfloor and is flush with the tile instead of sitting on top of it.
Plunging down too hard
A hard thrust downward can break the wax seal between the toilet and the floor, causing a leak.
Drain Size
Most waste lines have a 3- or 4-inch diameter. Many wax rings are compatible for both sizes, but it's still prudent to double-check the compatible drain size before buying a new product. To determine the correct wax ring size for your toilet, you'll need to remove and measure the base.
Many professionals stick with wax because they know it's reliable, and they're paid to deal with the mess. If you're more comfortable with the tried-and-true approach, go with a wax seal. If you'd rather have something that's easy to install, then a modern, wax-free toilet seal might be a better choice.
Replacing the wax ring is as easy as sliding the new piece onto the bolts in the floor, then sliding the toilet down to make a tight seal.
Using a wax-free seal makes clean up easier and there's less room for error. An argument that one could make for wax-free seals is that they're reusable. If you need to remove the toilet base with a wax ring, you'll need to purchase another ring to reinstall the toilet.
So, what's the cause? Leaky loos are usually caused by a faulty flush-valve or fill-valve inside your tank – predominantly on dual-flush WCs. It can happen with any WC brand and type, but most leaky loos are the result of a failure in valve seals. These failures can happen on old and new WCs.
The most common toilet leak is caused by a deteriorated flush valve (flapper) at the bottom of the toilet tank. If the flapper does not seat properly, water will leak into the toilet bowl. Often this leak will occur without being heard.
The optimum flange height to aim for is 1/4 inch above the finished floor. This typically allows for almost any type of wax ring to be used and still ensure a good seal. If you recently tiled or changed the bathroom flooring, the flange height is likely less than optimal.