How do professionals clean showers? Professionals use acid-based cleaning solutions like vinegar for hard water spots and
Spray Shower with Cleaner
After removing all shower accessories and bottles, spray the entire area with a commercial shower cleaner ($2.28, Walmart) or a DIY shower cleaning solution of equal parts vinegar and dish soap.
Sometimes, with soap scum, professionals will need detergents or degreasers as well to clean it thoroughly. Bleach is good for removing mold and mildew from your shower grout, but it's more of a temporary solution. You need to really clean the mold from within and seal the grout to prevent any mold from spreading.
Many hotels use ammonia-based cleaning solutions because ammonia readily cuts through dirt and soap scum. Because of the way it dries, ammonia also decreases the possibility of streaks on glass. That being said, exercise care when handling ammonia.
In fact, the number one trick used by many hotels is to install water softeners in the shower heads and pipes to reduce the hardness of the water. By removing the minerals that contribute to spots and stains on the glass, they can slash their cleaning times in half.
TLDR: professional cleaners use a detailed process to wash tile and grout. First, they start by vacuuming the floor to remove dry dirt. Next, they mop the floor to remove stains. After that, a thorough steam cleaning of your tile and grout occurs.
Dawn dish soap and vinegar – Mix equal parts of vinegar and blue Dawn dish soap into a spray bottle. Run the shower for a few minutes on hot to heat up the shower space. Spray to coat the surface of the shower walls evenly with the mixture. Let sit for 5 minutes then use a damp cleaning rag to wipe away.
You can use baking soda and water, or use washing soda with hydrogen peroxide. Some people find it easier to use a toothbrush to apply solutions on the grout before scrubbing them off. This will allow you to reach all the necessary spots and clean your shower walls thoroughly.
Baking soda and hydrogen peroxide are items you can get easily—you may already have them in your home! To make a cleaning paste for your tiles, mix half baking soda and half hydrogen peroxide. Then, put the mixture on the stained tiles and leave it sitting for one hour. After time's up, rinse the tiles.
Start by removing shampoos, conditioners, and the like. Then spray your all-purpose cleaner on all surfaces and let it sit. Wipe down the items you removed from the shower. Once done, begin scrubbing the shower with the microfiber, working your way around until all surfaces are clean.
The Rejuvenate No Scrub Soap Scum Remover is our top choice for glass shower doors thanks to its bleach-free, fragrance-free, and non-abrasive formula that leaves a streak-free finish and gets rid of soap scum and hard water stains on contact.
Water, Dish Soap, And White Vinegar Shower Spray
The next DIY daily shower spray you can make at home is a mixture of water, dish soap, and vinegar. This is a slightly stronger shower cleaner than the spray above and is recommended for families of four and people whose showers are used more than twice a day.
What do professionals use to clean grout? Whether you believe it or not, most professionals use a solution of white vinegar and water with a 1:1 ratio.
The most common and effective homemade grout cleaner is a mixture of baking soda, hydrogen peroxide, and dish soap. Cream or tartar and lemon juice is the best all-natural solution for whitening. Avoid using highly-acidic solutions like vinegar because they can corrode grout.
Hydrogen peroxide won't damage normal tiles or colored grout. However, you shouldn't use it on polished marble. Cleaning with hydrogen peroxide and baking soda is a great way to remove stubborn stains from your grout.
Shower Tile
Begin by pre-treating the surfaces with a water-vinegar solution. Then use a baking soda paste and scrub with a stiff bristle brush. Once you've loosened up the dirt on the tiles, you can use scouring pads to scrub the surface clean.
As soon as you get out of the shower, wipe the floor and close the curtain so it can fully dry out. Shower curtains are prime targets for mildew. If you have a shower with a door, leave the door open to air out the inside of the shower.