What do professionals use to clean carpet?

Author: Mrs. Emmie Kohler III  |  Last update: Friday, August 29, 2025

Steam cleaning is a carpet cleaning method commonly used by professionals. In fact, it's so popular that homeowners often try to implement this technique themselves by renting a steam cleaning machine for a day or two.

What kind of cleaner do professional carpet cleaners use?

Most professionals would only be using a couple of good quality alkali cleaning products varying in pH, such as Advanced Cleaner or Fast Lane to remove the acidic soil on the majority of their cleans.

What is the best way to professionally clean carpets?

Otherwise known as steam cleaning, this is easily the most common professional carpet cleaning technique. Steam cleaning uses hot water at high pressure to penetrate into carpet fibers, breaking down the dirt and bacteria stored deep within. The hot water is then extracted via vacuum.

What is considered professional carpet cleaning?

How Do Professionals Clean Carpet?
  • Injects a cleaning solution deep into your carpet's fibers.
  • Agitates the solution using brushes to loosen dirt and release stains and odors.
  • Rinses the carpet using hot water sprayed from a high-pressure hose attached to a truck outside your home.

Is it better to shampoo or steam clean carpets?

Although we offer both approaches, in our opinion, steam cleaning tends to be the better option in most situations. Here's why: It can usually remove ingrained dirt more effectively – particularly stubborn stains that have embedded themselves deep into the fibres.

5 Tips To Clean Your Carpet Like A Pro

What are the disadvantages of steam carpet cleaning?

8 Reasons Why Steam Cleaning Is Bad For Your Carpet
  • Not Chemical-Free. ...
  • Leaves Your Carpet Soaking Wet. ...
  • Prolonged Drying Times. ...
  • Draws in More Dust and Dirt. ...
  • Creates a Breeding Ground for Mold and Mildew. ...
  • Causes Unnecessary Wear. ...
  • Produces Wastewater. ...
  • Requires Heavy Equipment.

What cleans carpets really good?

These are some of the best—and simplest, in terms of ingredients used—non-toxic solutions for cleaning your carpet naturally.
  • Steam Vapor. ...
  • Water + Vinegar + Salt. ...
  • Baking Soda + Vinegar + Water. ...
  • Salt + Borax + Vinegar. ...
  • Baking Soda + Cornstarch + Cornmeal + Borax. ...
  • Pristine Pet Stain & Odor Remover. ...
  • Dr.

Is professional carpet cleaning better than DIY?

What are the main advantages of professional carpet cleaning over DIY methods? Professional carpet cleaning offers superior results with powerful equipment and specialized solutions, removing deep-seated dirt and allergens more effectively than DIY methods.

How often should carpets be cleaned professionally?

Professionally deep clean your carpets every 12 to 18 months to remove embedded dirt and grime. SOA-certified cleaners are recommended and sometimes required by the manufacturer to ensure results and warranty protection.

How to deep clean a carpet at home?

Start by sprinkling a generous amount of baking soda over your carpet. Then, spray a mixture of warm water and carpet shampoo over the baking soda. Scrub the carpet with a brush, then blot with a clean cloth. Repeat the process using only water to rinse out the shampoo and baking soda, then blot dry.

How does Stanley steemer clean carpets?

We use our patented carpet cleaning machines to deep clean. These machines pump hot water into your carpet to release any dirt deep within the fibers, then extract the water and remove the dirt.

Does professional carpet cleaning really work?

Regular carpet cleaning can extend the life of your carpet as well as get rid of tough stains. Most carpet manufacturers recommend having carpet professionally cleaned every 12-18 months, depending on how much foot traffic your home gets.

What is the best professional carpet cleaning method?

So, which cleaning method do we think cleans better? Honestly, steam cleaning is the preferred method for most residential and commercial “wall-to-wall” carpet.

What should you not clean carpet with?

Abrasive cleaners can damage the carpet fibers and leave a bare spot where the stain used to be. The same goes for heavy-duty scrubbing brushes. If you must scrub your carpet, use a mild cleaner and a soft bristle brush to prevent damage.

What chemicals does Stanley steemer use to clean carpets?

EPA Safer Choice Certified for Safer Carpet Cleaning
  • Water CAS# 7732-18-5.
  • Trisodium Dicarboxymethyl Alaninate CAS# 164462-16-2.
  • Sodium Polyacrylate CAS# 9003-04-7.
  • Anionic Polymer CAS# Proprietary.
  • Citric Acid CAS# 77-92-9.

Why is Stanley Steemer so expensive?

One factor that greatly impacts the cost of a professional cleaning is the specialized equipment and products being used during the process. These tools are more advanced than your average household vacuum or floor mop—here are some ways they differ: Degree of Cleaning: Professional cleaning processes may vary (ie.

What is the process of professional carpet cleaning?

12 Step Carpet Cleaning Process
  • Step 1: Pre-Inspection. Our technician will walk through your home with you to visually inspect the carpet. ...
  • Step 2: Pre-vacuum. ...
  • Step 3: Furniture Moving. ...
  • Step 4: Pre-Spray. ...
  • Step 5: Pre-Spot. ...
  • Step 6: Pre-Groom. ...
  • Step 7: Soil Extraction and Rinse. ...
  • Step 8: Neutralizer.

Is it cheaper to clean your own carpets?

A DIY carpet cleaning system may allow you to clean your carpets for a lower price point. However, be aware that you also will need to buy solution as well as rent the machine, driving up costs. Ultimately, by going the DIY route, you will sacrifice a major level of quality in the clean.

What are the disadvantages of carpet cleaning?

Carpet cleaning, while essential for maintaining a clean and fresh living space, can contribute to wear and tear on carpet fibers over time. The vigorous scrubbing and high-pressure cleaning methods used by some carpet cleaning companies can cause damage to the delicate fibers, reducing the carpet's lifespan.

Are carpets wet after professional cleaning?

When you have your carpets professionally cleaned, you should expect your carpets to be slightly damp to the touch after the service is completed. Your carpets should never be left wet or soggy after a steam cleaning process. Typical dry times are 6-10 hours for residential carpet.

Does professional carpet cleaning remove all stains?

That said, there is no guarantee that professional carpet cleaners will be able to remove each and every stain from your carpet, particularly if we haven't seen the carpet. Or it may take more than one professional carpet clean to completely remove long-term stains from your carpet.

Can you use Dawn dish soap to clean carpets?

Detergent Carpet Cleaner

For synthetic carpets: Mix ¼ teaspoon of a translucent liquid dishwashing detergent, such as Dawn or Joy, into one cup of lukewarm water. For natural fiber carpets: Mix one teaspoon of translucent liquid dishwashing detergent, such as Dawn or Joy, into 1 cup of lukewarm water.

What is the strongest carpet cleaning solution?

Our Top 5 Carpet Cleaning Picks
  • #1 Industrial Strength Carpet Extractor by Boardwalk.
  • #2 Deodorizing Carpet Cleaning Powder by Arm & Hammer.
  • #3 Triple Oxi Advanced Trigger Carpet Cleaner by Resolve.
  • #4 General Purpose Spotter by Diversey.
  • #5 Urine Destroyer by Resolve.

Can I put fabuloso in my Bissell carpet cleaner?

Yes. Bissell will tell you no, because they want you to buy their stuff. But it is fairly pricey and I've found virtually no difference in cleaning between Bissell's stuff, Pine-Sol, Fabuloso or any other multi-surface stuff you'd use normally to mop with. The only thing to be mindful of is the concentrations.

Previous article
What temperature should a water heater be set at?
Next article
How do I know if my AC filter is dirty?