As we mentioned earlier, using chemicals for Intex pools would be a great help to keep your pool water clean and clear, and also help in prolonging your Intex pool's lifespan. Since adding chemicals in your Intex pool is not that complex of a process, you can easily get used to it after doing it once or twice.
For the greatest protection against algae, bacteria, and cloudy water, Intex pools should maintain a chlorine level of 2.0-4.0 ppm at all times. If you opted for the Intex Salt Chlorinator, you can make your own chlorine by adding the correct amount of Pool Salt to the water.
Once the pool is opened and the floor and walls have been brushed the first chemical you should add is chlorine to shock it. It's recommended you add a gallon of liquid chlorine or pound of granular chlorine for every 5,000 gallons of water in the pool. You can also add more chlorine at the end of the opening process.
When preparing your pool for a storm, leave it uncovered. Installing any kind of cover across the pool will not do much to protect against dust and contaminants because storms often bring strong winds and heavy rain that can cause the cover to lift off your pool.
You simply place your chlorine tablets in the floater (based on gallons of water in your pool), and it does the work for you. The downside to a chlorine floater is that it is a passive system, so sometimes it can get stuck in one spot for a period of time.
We recommend shocking Intex pools every week, especially if you're having a heat wave or heavy rains. Heat and excess water can knock your chlorine levels to sub-par levels pretty quickly. Use a pool shock with a decent amount of available chlorine, and run your filtration system after you shock your pool.
You should cover your pool every night for several reasons. First off, a pool cover saves energy and conserves water by decreasing the amount of make-up water. Also, it reduces the consumption of chemicals, and finally, it saves a lot of cleaning time since it keeps the debris out of the pool.
Liquid chlorine is a good choice to use in a vinyl liner pool. The chlorine itself isn't as concentrated as others and it distributes very quickly throughout the water reducing the risk of having concentrated areas of chlorine. You should pour liquid chlorine evenly into specific areas of your pool.
The best rule of thumb for pool owners trying to estimate how many tablets to add is this: Add one tablet for every 5,000 gallons of water and always round up. For example, if your pool has 21,000 gallons of water, add five tablets per week. If it has 8,000 gallons, use two tablets.
Although inflatable pools don't need to use chlorine, it's one of the most common ways to keep pool water sanitary and safe to swim in. The chlorine is used to efficiently kill bacteria in the water that may be harmful to swimmers. Larger inflatable pools will benefit the most from the use of chlorine.
Alkalinity Adjusting Chemicals for Pool Start Up
It doesn't matter if it was too high or too low, chemicals are going to be needed. This should be the first chemical that you add to your pool during start-up. This one can really affect the pH level of your pool.
Chlorine/non-chlorine chemicals – When adding chlorine or non-chlorine chemicals to “shock” your pool after a fill-up, wait about 24 hours or until levels are approximately 5 ppm. If you'll only be adding liquid chlorine, it's generally safe to swim after about 4 hours or until levels are 5 ppm or lower.
If you have a vinyl liner, you'll be happy to know you can use a salt chlorinator system in your pool without taking any extra precautions. The liner will be exposed to lower levels of chlorine, so it may even extend your liner's lifespan. However, many inground pools have galvanized walls behind the liner.
Generally you will want to wait at least 4 hours, but ideal is waiting for one complete turnover of the water (the time it takes all the water to go through the filter).
You can swim with chlorine tablets in the pool if the chlorine tablets are in a container. Getting in touch with those tablets can cause rashes, irritation and eye problems. However, to be in a safe zone it will be better if you wait for 3 to 5 hours till the chlorine levels touch 4 to 6 ppm.
INITIAL STARTING DOSAGES :
Maintain chlorine at a minimum of 1.5 ppm and up to 3 ppm. The more swimmers you have and the warmer the water is, can double your pool's chlorine consumption. Add whatever amount of chlorine it takes to maintain a 1.5 ppm chlorine..
But large quantities of precipitation combined with an overflowing pool and poor drainage can cause problems such as flooding, structural damage to the surrounding buildings as well as out of balance swimming pool water chemistry. No fun.
Most tarps come with metal grommets (eyelets) designed for this. Hook the bungee cords to the tent stakes to hold the tarp pool cover in place. If your tarp is large enough to have interim grommets along the edges of the tarp, drive additional stakes and secure the tarp using additional bungee cords.