Stainless steel is called "stainless" because it stains less easily than regular steel, but it is not stain-proof. It stains when the invisible, protective chromium oxide layer on its surface breaks down or gets covered by minerals, oils, or burned residue.
To protect the finish and prevent corrosion, avoid the following abrasive tools, harsh chemicals, and improper cleaning habits on your stainless steel surfaces and cookware:
Does WD-40 remove scratches from stainless steel? Yes, WD-40 can reduce the appearance of minor scratches and add shine, but it might not be suitable for all finishes, says Pascale. To avoid damage, test it on an inconspicuous area first, then spray a small amount on a soft cloth and rub in the direction of the grain.
Yes, you can use Dawn dish soap on stainless steel. It is an excellent, safe, and affordable way to cut through cooking grease, oils, and fingerprints on appliances and cookware.
Murphy Oil Soap can be used to clean and shine stainless steel, especially to cut through built-up grease and remove stubborn fingerprints. However, because it is an oil-based soap, it must be highly diluted and completely buffed off to prevent a sticky, dull residue.
To make the solution is simple and easy on the wallet! Pour equal parts of vinegar and Dawn into a spray bottle. Gently shake, then spray liberally onto the surface to be cleaned. I have found the best results is when I use it to clean chrome shower and sink fixtures.
Yes, toothpaste can help remove very light, superficial scratches from stainless steel, as it contains mild abrasives like silica. However, it only works on very shallow marks and won't fix deep gouges.
While a professional polish may be necessary for tougher jobs, you can get your stainless steel looking great with something you have right in your pantry: olive oil! From your stainless pots and pans to the door of your refrigerator, a few drops of oil will get the job done.
Using a Magic Eraser on a stainless steel sink is heavily debated. While some people use it to remove stubborn grime, it works like ultra-fine sandpaper and can cause fine scratches, spiderwebbing, or dull spots if used incorrectly.
Stainless steel and chlorine do not belong together. Quite the contrary. We can safely say that chlorine and chlorine products are among the greatest enemies of stainless steel - certainly of the most commonly used quality, SS 304.
Yes, you can use olive oil on stainless steel, but how you use it depends entirely on whether you are using the metal for cooking or for cleaning/polishing appliances.
Avoid Harsh Chemicals: Stay away from bleach, ammonia, and other harsh chemicals that can damage stainless steel. Instead, opt for cleaners specifically designed for stainless steel, such as the John Boos Stainless Steel Cleaner. Prevent Water Spots: Water spots can dull the shine of stainless steel.
Yes, Bar Keepers Friend can remove light surface scratches and scuff marks, such as those caused by metal utensils. However, because it contains a mild abrasive, it works by essentially "buffing" the surface. Always rub in the exact same direction as the steel's natural grain to prevent adding new, visible scratches.
To make stainless steel look new again, always wipe with the grain (following the faint lines in the metal). Use a 50/50 mix of warm water and white vinegar to cut through greasy fingerprints and water spots, buff out residual streaks with a dry microfiber cloth, and apply a specialty polish for a final protective shine.
7 Mistakes You're Making With Stainless Steel
Adding the Oil
Oils like grapeseed, canola, or peanut oil, which have a high smoke point, are ideal for stainless steel cookware. Pour in a thin layer of oil and let it heat until it shimmers. This step helps create a temporary non-stick surface, preventing your food from sticking to the pan.
Yes, you can absolutely use WD-40 to clean and polish stainless steel. It is a highly effective, inexpensive way to remove stubborn grease, fingerprints, and watermarks while leaving a protective, shiny finish. It even helps prevent future staining and fingerprints.
Use a microfiber or soft cloth when wiping down your appliances. Avoid cleaners that can damage steel and finishes. Instead, clean your stainless steel appliances with a dish soap like Dawn® Platinum.
For deeper scratches on uncoated stainless, you can use an abrasive pad like fine sandpaper (400-600 grit) or a scrubbing sponge and some olive oil to gently buff out and repolish the finish. White vinegar also makes an effective chrome and stainless steel polisher after you finish buffing out scratches.
WD-40 doesn't actually repair scratches, but it is excellent at temporarily hiding very light surface marks and removing paint transfers (like when another car scrapes yours). It works by acting as a lubricant and temporarily filling in the scratch or dissolving the foreign paint.
"It is thought that whitening toothpaste may help to whiten nails and eliminate surface stains," says Garshick. She specifically points to formulas with baking soda as a potential tool for removing nail stains.
With the promise of food and protection, your porch or patio is irresistible to these little critters. While chemical-laden insecticides can effectively eliminate spider infestations, vinegar offers a non-toxic alternative. How does it work? Spiders dislike vinegar's pungent odor, and they avoid areas treated with it.
The ultimate lazy shower hack is the "Shower and Soak" method. Mix equal parts distilled white vinegar and original blue Dawn dish soap in a soap-dispensing dish brush. Keep it in your shower, and while your hair conditioner sits, give the walls a quick scrub. Rinse as you shower for a perpetually clean bathroom.
When creating a cleaning solution for tile floors using ½ cup of baking soda and a bucket of warm water, essential oils can be included to give the mixture a nice scent." But, there's another benefit to using your favorite essential oil to leave behind a better smell after mopping.