There are many reasons why a gas stove isn't working. Some of the most common issues include accidentally unplugging the stove, excess food debris, or the gas not being connected properly. While there are many DIY solutions for simple issues, it's usually best to call a service professional to help troubleshoot.
The most common issue is that no power is getting to the burner or coil. This could be a tripped breaker, a blown a fuse, or a defective switch. If there is power going to the burner, but it still doesn't work, then there might be an issue with the burner or coil itself, and it will need to be replaced.
There are many possible reasons why the burner will not stay lit - the gas jet may be blocked, the valve may be set too low, the air flow may be restricted, there may be an issue with the pilot light, and so on.
A breaker trips when there is too much electricity flowing through it - this can be caused by an electrical short, or by overloading or by a failure of the breaker itself. If you turn the oven on and it immediately trips, there is a short somewhere in the circuit, possibly a broken wire making contact with the frame.
Range or Stove, 13-15 years:
Gas stoves last longer than their electric counterparts by 2-5 years, on average. Good everyday care will help extend the useful life, such as cleaning the stove after every use and regularly checking the burners.
Signs that your gas stove is not working properly include smelling gas, the burners not lighting, strange noises, poor temperature control, or the flame color changing to red, yellow, or orange rather than blue.
Check the Circuit Breaker
Turn the breaker off and then back on. Check for overloading: Ensure you're not running too many other appliances on the same circuit as your stove. Overloading can cause the breaker to trip. Inspect the breaker panel: Look for any signs of burning or damage in the breaker panel.
Unplug or turn off the appliances or devices that are connected to the tripped circuit. To determine which appliance or device is causing your electricity to trip, you can unplug each one so you can find which one is causing the problem.
If the range or oven is receiving power but doesn't work, the unit may have its own fuse or circuit breaker assembly. This assembly is usually located under the cooktop of the range.
For most powering- related problems, the problem often lies in the selector switch, with damage seen in the form of switch poles arcing, burning or scorching. Another issue could be in the elements, which you should check using an earth leak or electrical meter.
Overheating. A lot of modern ovens come equipped with a protective safety measure to stop them from overheating. This typically comes in the form of a circuit breaker, cutting power to the oven in the event that it gets too hot.
Expansion and Contraction of Metal Parts: As the stove heats up during use, metal parts like the burner and cooktop can expand. The popping noise might be the result of metal expanding and contracting as it cools down.
Turn the circuit breaker to the OFF position or remove the fuse. Wait one minute, then turn the circuit breaker back to the ON position or install the fuse to reset power to the appliance. This should reset the electronic controls on the Range or Wall Oven.
The possible reasons your oven is not working may include a broken baking or broiling element, a malfunctioning spark element (spark electrode), a broken igniter, a blown fuse, an issue with the control board, or outlets not providing enough power to the oven.
Some of the most common reasons which might cause a trip switch to operate: There are too many fittings or appliances on a circuit and it has been overloaded. An appliance is faulty or has not been used correctly, for example a kettle has been overfilled or a toaster not cleaned of crumbs.
Look and Listen for Flickering, Buzzing or Dimming Lights
If your lights buzz when they're turned on or flicker/dim when you use multiple appliances, this is a definite sign that you're home's wiring requires a professional upgrade.
Use appliances sequentially: Use only one high-wattage appliance at a time. For example, if the microwave keeps tripping the breaker, wait until you're finished with other appliances before using it. Install dedicated circuits: Consider hiring a professional to install dedicated circuits for high-power appliances.
Common causes of tripped breakers are an overloaded circuit, electrical short, ground fault, or overheated appliance. There are several causes for each type of issue, so you'll need professional help to troubleshoot. Check your appliance's warranty for repair or replacement coverage.
Experiencing an Oven Heating Element Failure
This will cause the sheath to rupture and sparks may occur for a few seconds. At this point, one of two situations may result: The household fuses or circuit breakers may "blow" or trip. The heating element will stop working.
In other words, a $212 repair on a low-end electric range rarely makes financial sense after the first few years; you're better off putting the money toward a new $800 range. But for, say, a more premium $1,250 range, the $212 repair is often worth making for at least a decade.
Many factors, including wear and tear, electrical problems, or physical damage can cause broken or damaged burners. If you continue to use the stove with a broken burner, it can cause further damage to the stove or even pose a fire risk.
Both with a 2 and 3-phase cooktop, we recommend a separate group. The most energy is being used when you turn on the cooktop. Are other appliances connected to the same group and are they on too, like an oven or fridge? A short circuit will occur.
You shouldn't take chances with anything that can catch fire. A stove and oven's average lifespan is up to 15 years—occasionally longer if you opted for a gas range. “The biggest thing to note is that a proper stove shouldn't take too long to heat up properly,” according to Paul.