Light-duty pressure washers are rated at 2,000 PSI or less and are suitable for cleaning automobiles, motorcycles, boats, bicycles and all-purpose cleaning. Medium-duty pressure washers produce 2,000 to 3,000 PSI and can be used to remove grease and grim from concrete, sidewalks, decks and siding.
Mid-Range Power: 2,000 to 3,200 PSI
The most versatile category of pressure washers, those ranging from 2,000 to 3,200 PSI effectively clean cars (including the most well-used off-road vehicles), home siding, fences, boats and grimy garage floors. Those closer to 3,200 PSI work effectively on tough stains, too.
For most cars, a psi between 1200 and 2200 is recommended. This range provides enough cleaning power to remove dirt and grime without damaging the car's paint or delicate surfaces.
A medium-duty pressure washer is strong enough to blast greasy, grimy stains from residential areas. Homeowners can safely clean sidewalks, concrete driveways, decking, and siding with a 2,000 to 3,000 PSI washer.
2,000 - 2,900 PSI: This is a moderate strength unit used heavier residential tasks. These units are commonly sold as either electric or gas pressure washers. 3,000 - 6,900 PSI: These high pressure models are what professional pressure washers and contractors usually use.
Concrete cleaning calls for powerful pressure washers featuring high pressure levels of 3000 PSI. However, if you will be using the power cleaner to maintain a range of surfaces in addition to concrete, choose one with adjustable pressure levels and set it to about 3000 PSI when you need to clean concrete.
To clean concrete, exterior siding or an asphalt driveway, you'll want at least 2,000 to 2,800 psi and 2 to 3 gpm (4,000 to 8,400 ECUs).
From there, you can work your way up, though it is generally best not to exceed 2000 PSI. It is also essential to use the right nozzle tip for the job. Don't use a narrow nozzle that will focus water too much in one area, as this may crack the grout or bricks. A nozzle that fans the water out is best.
Choosing a Pressure Washer
Vinyl siding can withstand a powerful gas pressure washer (2,500-3,000 psi). Aluminum, stucco or soft-grain wood homes will do better with a less powerful washer (about 1,200-1,500 psi). Determine whether you will rent or buy your machine.
We recommend around 2400 PSI for the average deck. This makes the job easy without damaging most woods. Start by using the standard spray tip to get rid of any loose dirt, leaves, and other easy debris.
For cleaning a wooden deck, you'll be best served by using the lowest pressure setting that's still effective. For soft woods like cedar or pine, this is usually about 500 to 600 psi. For harder woods, it can go up to 1200 to 1500 psi. Choose the right tip to use as well.
The maximum PSI you should use for a car wash should be 1,900, and your typical light-duty pressure washers rate up to 1,899 PSI and can also be used to safely clean outdoor furniture and grills.
Too much pressure (generally anything more than 1,900 PSI) can damage the paint job on your vehicle. If you're determined to do so, keep the following tips in mind. In addition to using the right pressure (1,000 to 1,200 PSI), make sure you use the correct nozzle.
Medium Duty 2000-2800 PSI
This classification ranges from as low as 2,000 PSI to as high as 2,800 PSI. You can use a medium-duty pressure washer for almost any surface. They're great for cleaning concrete, brick, and wood.
Not too much but enough to expect good quality. 2000 PSI and 1.2 GPM is powerful enough to handle smaller jobs around the house and car washing. This is not enough power for larger projects.
For starters, too much pressure on windows can easily cause the glass to shatter, so you should never use a PSI over 2,000. Furthermore, you need to adjust the spray to its widest angle on a 40- or 65-degree nozzle and use a spray pattern that avoids perpendicular pressure on windows.
If you need to clean a two-story house, you'll need a heavy-duty or extra heavy-duty pressure washer. This will give you a water pressure of 2,800 PSI (Pounds Per Square Inch) or higher and three to four GPM (gallons per minute) of water.
Pressure washing using 500 to 1000 PSI is recommended for cleaning masonry. Many professionals use 100 to 1500 PSI to avoid damage. 2,000 PSI is the absolute maximum, and that's for experienced pressure washers only.
If the pressure is set too high, it may ultimately damage your vinyl fence. It's best to start at a lower setting and adjust accordingly to your personal need. Usually, 500-800 PSI is an acceptable range to start with.
There's no doubt that electric pressure washers from 1,300 to 2,300 psi can wash a concrete driveway, but it'll take longer. If you have a large driveway with lots of stains, you'll want more power to do the job faster. I chose the 3,100-psi gas pressure washer and cut the job time in half.
Any machine capable of producing at least 1,500 pounds per square inch (psi) of pressure can clean concrete, but the work will go much faster if you choose a model producing 2,500 to 3,000 psi, like the gas-powered option below.
You have to know its capabilities, 1600 PSI is good for most home jobs (general siding cleaning/gutters, car washes, cleaning furniture) Don't expect it to clean a whole concrete driveway in one smooth pass.
To correctly strip old paint, you should work with a power washer with a psi of 2000 or higher. Even starting out at 2000 probably won't do the trick and you'll need to set the psi closer to 3,000 for effective paint stripping.
To pressure wash stucco, make sure to use a pressure level of 1,500 PSI or below and a 25- or 40-degree nozzle. Stucco surfaces are porous and delicate, so too high a pressure can damage them. There should be at least 24 inches between the nozzle and the stucco surface.
Using Soap Means Less Pressure and Less Damage To Your Home.
If the stream of water is too strong, it can damage stucco, masonry, wood and vinyl siding and can also penetrate into your home's structure. Pressure washing with high pressure also routinely damages window screens, decks and exterior lighting.