R-1234yf refrigerant. To date, most auto manufacturers are using the hydro fluoro olefin (HFO) refrigerant R-1234yf as the replacement of choice for R134a.
A High-Performing Alternative to R-134a
Opteon™ XL10 (R-1234yf) refrigerant is a non-ozone depleting (ODP) hydrofluoroolefin (HFO) option that meets the industry's growing demands for sustainable, safe, and effective solutions.
R513A was developed as a replacement refrigerant for R134a. R513A is a modern, non-flammable refrigerant designed to replace R134a in a wide range of applications. It provides a sustainable solution for both new systems and retrofits.
You cannot change an r1234yf system to be compatible with r134a. It is both illegal and damaging to the AC system components due to the different types of refrigerant oil used between the two refrigerants.
Some notable substitutes for R134a [10] in AAC based on the preceding studies are R1234yf [[11], [12], [13], [14]], R1234z (E) [[15], [16], [17]], R152a [[18], [19], [20]], R290 [21,22], R744 [[23], [24], [25]], R430A [26,27], and R444A [28], etc.
Possible alternatives to R-134a
Attention is increasingly focused on low-GWP refrigerants that are hydrofluoroolefins (HFO). R-1234yf in particular is often seen as a possible alternative to R-134a. The GWP value of R-1234yf is 4, which means it has a very low global warming potential.
Firstly, the primary difference is the environmental impact. Old refrigerants like R-12 and R-134a are known to contribute to ozone depletion and global warming. In contrast, 1234YF is classified as a has a much lower global warming potential. Secondly, the performance of the refrigerants is different.
Still, the answer is an emphatic, “No.” Not only would a retrofit of this type negate the environmental benefits of R-1234yf, but it would also be a violation of Federal Law under Section 203 of the Clean Air Act: “tampering” with a vehicle's emissions control device.
The AIM Act is a Federal nationwide rule phasing out the use of global warming materials. As part of that effort, EPA is now banning the use of 134a in aerosol products as of 1/1/2025. There are excepted products that are allowed to use 134a until 1/1/2028.
This group of synthetic refrigerants is not subject to a ban on use. This means that installations using R134a, R407C and R410A can simply be refilled after 2030. However, there will be significantly less synthetic refrigerant available in the future due to production limitations.
According to its manufacturer, Chemours, use of R-1234yf has grown so much since the refrigerant replaced the long-established R-134a that it's now used in 95% of new cars sold in the U.S. An estimated 220 million cars on global roads are also using it.
R32 and R152a have a reduced global warming potential than R134a, which indicates that R32 can be used as substitute for R134a in refrigeration systems.
While the production of new R12 is banned, it is not illegal to sell or use R12. In fact, many of the cylinders and cans of Freon R12 sold for decades throughout the United States are still around today.
The GWP for R-134a refrigerant is 1,430, making it 1,430 times more harmful than carbon dioxide when released into the atmosphere. There are three refrigerants that can be used to replace R-134a: R-1234yf, R-152a, and R-744.
R-1234yf systems that control freeze protection by pressure may encounter loss of cooling performance if charged with 100% R-134a. This is due to the requirement of R-134a to have a lower setting of 3.3 psig to achieve freeze protection at 32 F. This may result in a 4-degree F.
As part of global efforts to reduce the environmental impact of refrigerants, R134a will be phased out by 2025 in favor of more eco-friendly alternatives like R290 and R1234yf12.
Adapters to convert an R-134a manifold gauge set to be able to connect to an R-1234yf system are readily available, so along with eventual availability of a recovery-only machine, the opportunity to convert an R-134a system to R-1234yf exists.
It was used for so long that most people simply refer to any refrigerant as "freon." In fact, the word Freon is one type of product, a hydrochlorofluorocarbon (HCFC) compound known by industry experts as R-22. The EPA began phasing out HCFCs in 2010 and officially banned their production and import in 2020.
Another HFC R-134a typically used in automobiles, will not be permitted to be used in Model Year 2021 vehicles; however, R-134a is not restricted for use in chillers. Even though HFCs are under scrutiny, they remain the right choice for chillers and other industrial cooling uses.
Most vehicles have a label or sticker under the hood that indicate whether the refrigerant used is R-134a or R-1234yf.
It is anticipated that by 2025 all vehicles will contain 1234YF. Don't fret, however, if your current vehicle requires 134a. Though 134a is not compatible with 1234YF and is expected to be phased out, it is still in production and will continue as long as there is a demand for repair of older vehicles.
Switching to R1234yf refrigerant is a step towards a greener future, but it comes with higher costs due to advanced equipment, stringent regulations, and specialized training.