Vertical members, also known as spires, are the vertical components of the fence. They are usually spaced about six inches apart and are often topped with ornamental pieces called finials. Scrolls are another form of spire decoration.
A fence post is a vertical four-by-four post embedded in concrete in the ground. Horizontal fence posts are spaced closer than posts for vertical fences. Vertical fences are the most common type of fence. They are sturdy because the fence boards will not sag due to gravity.
Fencing has three disciplines — foil, epee and sabre, according to the targets on the opponent's body — and originated in Europe. The sport is basically anaerobic in nature, with high-power, explosive movements through a full range of motion.
Vertical members, also known as spires, are the vertical pieces of wrought iron that serve as the fence 'posts', and in terms of fence construction, pickets are the vertical pieces that make up the centre of a fence panel.
Rail: A rail is a horizontal support element to which fence boards or pickets are attached. The distance between rails is known as rail spacing. Rail end: A rail end is a cup-shaped fitting used with a brace band to connect the top rail or brace to a post.
The finished side of a fence is often called the “face” while the unfinished side is called the “back.” Regardless of whether you paint it or dress it up, the back of the fence is the one that contains the horizontal fence supports (also called stringers) and the in-ground fence posts.
A steel fence post, also called (depending on design or country) a T-post, a Y-post, or variants on star post, is a type of fence post or picket. They are made of steel and are sometimes manufactured using durable rail steel.
A wrought iron fence is comprised of vertical and horizontal members. Vertical members, also known as spires, are the vertical components of the fence. They are usually spaced about six inches apart and are often topped with ornamental pieces called finials. Scrolls are another form of spire decoration.
The top caps are the strips of wood that go at the top of the fence panels to finish off the garden fences and enhance the decorative appearance of your fencing panels and garden fences .
What is a Vertical Pivot Gate? VPGs are automatic vehicular gate systems that open and close with the same motion of a railroad crossing arm. They offer considerable security, safety, and space saving advantages compared to sliding gates.
A fence is a structure that encloses an area, typically outdoors, and is usually constructed from posts that are connected by boards, wire, rails or netting. A fence differs from a wall in not having a solid foundation along its whole length.
Fencing is split up into three different events based on the weapon used. There's the foil, epee, and sabre. They each have their own set of rules, and their roots can be traced back centuries.
A fence diagram provides a way to visualize the space between multiple overlapping surfaces in 3D space, such as stratigraphic data. Any curved segments will be generalized into line segments using the Sample Distance parameter value.
All the vertical metal members that make up a fence panel or gate. The pickets go through the horizontal rails and are then set with stainless steel screws.
This type of fence uses a combination of wide boards and thinner strips referred to as battens. The battens are placed along the seams between the wider boards to effectively seal off any gaps.
Batten fencing is built using Kiln Dried Treated Pine rails and plinth (building grade timber) so as to ensure a higher quality fencing outcome. Posts would be “Dressed All Round” so as to be ready for painting or staining.
Rails. Rails are used as additional support for a fence. They are typically 2x4" thick strips of wood that run horizontally along the fence. Picture frame fences typically have two rails running along the top and bottom of the pickets for support.
Fence toppers attach to the top of an existing fence to make it taller. That's why they're sometimes referred to as fence extensions. They may be strictly decorative, or increase privacy by adding a solid panel that raises the fence height.
Anti-climb spikes – otherwise known as fencing spikes or cacti spikes – are often used at the top of walls and fences, and can be either metal or plastic. Anti-climb spikes are usually supplied in strips which are nailed, screwed or glued to the top of the wall.
Everbilt Galvanized Chain Link Fence Top Rails are a necessary fence material when building a fence that is stable and secure around your yard, home or business.The metal top rail is part of the fence framework and helps support the chain link fabric.
An apron fence is a fence that helps to keep out digging predators. But it isn't normally a special type of fence that you buy; it's more of a special way to install your fence. You can install a dug apron fence or a bent apron fence.
Racking means adjusting the fence's rails so that it matches the slope beneath it while the pickets and posts remain vertical. To rack a fence you'll need to: Measure the angle of the slope, and then calculate the angle of the cuts that are needed on the rails.
Rails. Rails are usually at the rear of the fence panel or installed behind the pales of a kit form fence. Rails can come in different shapes. They can be installed horizontally or vertically depending on the panel.
Western red cedar stack fence, developed by early American pioneers, has also commonly been referred to as Battlefield fence, Worm fence, Snake fence, and ZigZag fence.
Hinges. Hinges allow the components of the fence to hold it together. Most fences require two hinges but taller or heavier fences may require three hinges.