Battens — Timber or metal strips used to support plasterboard or other ceiling materials. Bulkhead — A lowered portion of the ceiling that creates a design feature or hides structural elements. Bulkhead Ceiling — A lowered ceiling section used to define spaces or add visual interest.
The first layer is usually the structural layer, which provides support for the ceiling. The second layer is the insulation layer, which helps regulate temperature and reduce noise. The third layer is the vapor barrier layer, which prevents moisture from entering the ceiling.
The ceiling frame is the horizontal area between the top of walls and the roof. It is the horizontal member that carries the load of the ceiling sheets and act as a tie between the rafters at their base. It consists of ceiling joists, trimmers and beams.
Ceiling joists
These boards are generally 2”x6” boards, up to 2”x12” and are located directly above the drywall ceiling. They will run across the ceiling of each room and be supported on each end by a wall. They are stood up on their thin edge and will usually have some sort of insulation between them.
A scuttle hole is an opening in the ceiling, or less commonly the wall, that provides access to the attic of a house.
The parts that make up your ceiling are . The joists, the noggins or struts, lateral restraints , insulation and ceiling board ,coving .
The cornice area is where walls and ceilings join.
If they're structural supports, they're either joists or rafters; joists are horizontal, running across a ceiling to help hold it up, while rafters are sloped to run along the pitch of the roof. But if the ceiling beams you're looking at are decorative instead of structural, they're simply called wooden beams.
The tray ceiling is one large recess in a ceiling while the coffered ceiling has a series of sunken panels. TRAY CEILING: a recess in a ceiling that resembles an inverted tray. Often rectangular, though it can be other shapes, the tray ceiling is used to create architectural interest by breaking up a flat ceiling line.
Ceiling Skirting Is Called Coving / Cornice
But we think this is down to many people not actually knowing what coving or cornice is - or what 'that stuff that goes around the top of the room' is actually called.
The top of a dome is the "crown". The inner side of a dome is called the "intrados" and the outer side is called the "extrados". As with arches, the "springing" of a dome is the base level from which the dome rises and the "haunch" is the part that lies roughly halfway between the base and the top.
Joists and beams create the ceiling of a room, and support the ceiling cladding (the part that's visible). Ceiling joists also help to anchor the walls to prevent them from collapsing inwards or outwards, and help to keep the roof up.
That is called ceiling texture. Some of them have little bits of paper mixed with drywall compound or gypsum. Some have plaster of Paris or bits of Styrofoam. Some are sprayed thin. Others are sprayed thick and called a popcorn ceiling.
I you're referring to the space BELOW a roof and ABOVE a ceiling, it's called an attic. Otherwise the space above a roof is called 'air,' and the space below a ceiling is called a 'room'.
It's a flat, finished surface, usually 8-10 feet off the ground. Most commonly, they are constructed of either drywall or plaster. It's the kind of ceiling most of us have in our homes. The finish may vary, but the design and materials are usually the same.
Ceiling moulding, also known as crown moulding or cornice, runs along the top of a room where the wall meets the ceiling. It softens the transition from wall to ceiling. Crown moulding can be simple or intricately detailed. These types of moulding trim can make a room look polished.
Tray ceilings (also called inverted or recessed ceilings), feature a center section that is several inches higher than the areas around the perimeter of the room. They are very popular because they can trick the eye into thinking the ceiling is higher!
A roof overhang, also known as an eave, is the part of a roof that extends beyond a building's exterior wall. It consists of roofing components such as the fascia, soffit, gutter, and drip edge.
Coving Curved junction between wall and ceiling ie.
A bulkhead ceiling, also known as a “suspended ceiling”, is an additional ceiling which protrudes from the main ceiling. These ceilings are typically box-shaped but can be rounded or curved. Bulkhead ceilings are a popular solution to conceal lighting, plumbing, air conditioning, and speaker systems.
What is a ceiling beam? Known also as exposed beam ceilings, exposed rafters, exposed timber beams or exposed trusses, ceiling beam configuration uses number of exposed joists and beams that have been designed to create visual interest and bring individual flair to your ceiling.
VAULTED: An angled ceiling that meets at a higher central point. This element draws your attention upwards while creating the illusion of a larger room. Cathedral ceilings are a type of vaulted structure where both sides slope at equal angles and follow the pitch of the roof.
Batten ceilings are a type of ceiling that is made up of timber, which is an affordable and sustainable material. Timber battens are often used in warehouses, workshops and garages as they provide good insulation against the heat and noise.
Joist, Ceiling. The timber used in the roof structure to support the ceiling battens and ceiling only. Ceiling joist do not carry any weight from the roof. Joist, Floor. The horizontal timber members used for supporting flooring or decking and in turn supported by the bearer(s).