We recommend dusting before vacuuming, this is because dust particles usually get moved around the room when you dust, meaning all your hard work will go to waste. A top tip is to wait at least 2 hours after dusting to get the vacuum out.
When housecleaning, it's generally best to dust first before vacuuming. Dusting surfaces can cause dust and debris to fall to the floor, so by vacuuming afterward, you can effectively clean up any particles that have settled. This order helps ensure a more thorough clean.
Professional cleaners typically use the rule of top to bottom when cleaning Meaning you would start high and work your way down to the floors. So dusting then vacuuming. The reasoning is that if you vacuum then dust, some of the dust will settle in your clean floors.
When housecleaning, it's generally best to dust first before vacuuming. Dusting surfaces can cause dust and debris to fall to the floor, so by vacuuming afterward, you can effectively clean up any particles that have settled. This order helps ensure a more thorough clean.
Q: So, should you dust or vacuum first? A: Dust first! Then vacuum. Why? This feels intuitive to us, but we'll break it down for you nonetheless. When you dust, some of that dust might, and probably will, fall to the ground -- putting it in the perfect position to get sucked up with your vacuum.
Typically, the best order to clean a house is to tidy up and declutter, dust all the surfaces, vacuum or sweep floors, clean bathrooms and the kitchen and then mop the floors. This helps ensure that you don't create more dust or mess as you go.
It is important to vacuum in multiple directions to release dust and dirt from the fibers. If your first pass actually closes the piles, then dirt and dust get trapped. This is why experts recommend vacuuming in different directions and thoroughly agitating the carpet piles.
It's generally recommended to vacuum before cleaning, especially if the carpet is heavily soiled. This removes surface debris and allows the cleaning solution to penetrate deeper into the carpet fibers during the cleaning process.
The first step before starting to vacuum should always be to check the filters and recovery bag. If the bag is anywhere near full, it should be changed before starting your job. A typical vacuum with a bag that is over 50% full can lose up to 80% of its vacuuming performance.
The biggest and potentially most costly mopping mistake, according to cleaning experts, is using too much water on moisture-sensitive floors like hardwoods and laminates. "Excess water can warp your hardwoods and cause your laminates to bubble," says Melissa Homer, the chief cleaning officer for Microfiber Wholesale.
The answer to this question is simple: Always wipe out dust on surfaces from top to bottom before you vacuum and mop, so you don't have to clean floors twice or more! However, some old-type vacuums used to stir up a lot of dust so people used to vacuum then dust.
Dust from Top to Bottom
Start dusting at the highest points in a room, such as ceiling fans and high shelves, and work your way down to lower surfaces. This approach ensures that dust falls onto surfaces you haven't yet cleaned, preventing you from having to redo areas.
Clean from the top down
There's nothing worse than cleaning something and then having to clean it again. When you dust your house, the dust will fall and settle on tables, bench-tops, and the floor. If you do this last, you'll find yourself re-cleaning these surfaces after you've dusted.
Those short, quick, back-and-forth motions that the majority of people do when vacuuming isn't sucking up all that dust, dirt and lint that is embedded into carpets and floors. The more efficient way to vacuum -- and the way professional cleaners do it -- is to go forward, in structured rows.
Take your time. Vacuuming slowly will allow your machine to suck up more dirt and dust, and ultimately get your rugs, carpets and floors much cleaner. Slow vacuuming allows the brush to agitate the carpet properly and suck up the unclean bits that emerge.
Books, carpet, rugs, upholstered furniture, fireplaces, and pets all contribute to the dust load. Dirt, pollen, smoke, exhaust, sand, and many other things may bring in dust from outside. In addition, mold, bacteria, and dust mites are all likely to inhabit and often proliferate in dust.
Vacuuming can agitate these VOCs, causing them to become airborne. Inadequate ventilation or low-quality vacuum cleaners may fail to capture these volatile particles, allowing them to linger in the air and potentially leading to adverse health effects, including respiratory irritation and allergic reactions.
So, what is the correct order of cleaning? Generally, it's best to start with decluttering each room, followed by dusting surfaces from top to bottom. Next, clean windows and mirrors, then tackle the floors by vacuuming and mopping. Finish with the kitchen and bathrooms to ensure they're hygienically spotless.
The Kitchen: A Cleaning Challenge
The kitchen is the home's heart for so many people. Unfortunately, it is also one of the hardest rooms to keep clean. With all those surfaces, appliances, and utensils, it's not surprising that the kitchen often takes the longest to tidy.
Dust before vacuuming
We recommend dusting before vacuuming, this is because dust particles usually get moved around the room when you dust, meaning all your hard work will go to waste. A top tip is to wait at least 2 hours after dusting to get the vacuum out.
Many professional cleaners suggest vacuuming first before mopping. Especially if your interior floor is hard surfaces, vacuuming will make it easier for you to sweep and mop later. Some would instead follow the process of dusting, sweeping, and vacuuming first before cleaning.
Heavy-traffic areas, such as the kitchen and bathroom, should be tackled first, followed by heavily-used living spaces. If you know the condition of your home, form a plan, and tackle one room at a time. This approach makes the large task of deep cleaning feel much less overwhelming.