Gloss sould always be done last unless papering. You should never be splashing gloss about anyway.
Many homeowners paint the walls first, then move on to the trim while they wait for the first coat to dry. Homeowners should think more strategically, says Rich O'Neil of Masterworks Painting. "Paint all the woodwork first—the first and second coats—then move onto the walls," says O'Neil.
After you have sanded any cracks and tapped off where the wall and skirting meet, you should apply two coats of gloss, satin or eggshell paint with a small paintbrush. Remove the tape and you are done! Painting your ceilings, walls and trims with complete confidence takes preparation.
You should paint your walls first and your skirting boards last. One of the golden rules of decorating is to start at the top and work your way down. By painting a feature wall beforehand, you'll avoid any drip marks ruining your newly painted skirting boards.
The ceiling should always be painted first. This allows you to effectively cover the surface with at least two coats while not having to worry about any over-spray (the effect of excess paint being sprayed onto the walls) by the roller. When painting the ceiling, you should always use a roller with a double arm frame.
Prime Your Walls
Apply primer before painting the walls. A primer is essential if you want to go from dark walls to light or white walls. Many brands offer paint and primer in one. First, use a paint brush to “cut in” 2- to 3-inch bands around the edges, corners and frames of a room.
The trick is to use a 'low-tack' masking tape. This will help to prevent paint being pulled off the surface where the tape is adhered. You need to apply the masking tape where the brush may touch the wall (where you don't want the paint to be applied).
The best way to do this is emulsion the ceiling and Walls first(cover all the big areas first) you usely need to have 2 coats. Then finish with your gloss by cutting it into the emulsion. Sorry should have told you to make sure all the areas are free from dust, above doors and along skirtings. Hope this helps.
A professional painting company will be sure to use the right primer for your room. You can also ask for primer recommendations at your local paint store or from your painting pro. If you're giving your entire room a facelift, always paint the ceiling first.
Can You Paint Gloss Paint Over Emulsion? It is possible to gloss over emulsion. Yes, but keep in mind the color underneath. It should be OK if it's a light green, but if it's dark, you may want to sand it down and undercoat it first.
For a simple answer, it's true that architraves and skirtings 'should' match, but matching is more relevant to proportional sizes and not design. You can very easily have different profile styles that work well together, and features that complement each other, even if they don't necessarily match.
Paint From Top to Bottom. After you've cut in your edges at the ceiling and baseboard using a brush, use your roller to apply paint from the ceiling downward. Amateurs often have telltale drips and spatters at the end of a paint job, but pros paint right over their mistakes as they work their way down the wall.
All you need to do, is apply a primer and undercoat with a roller to create the best surface. If you don't prime the surface with sealer, the plaster will soak up any paint like a sponge, so you'll waste a lot and end up doing more coats than you'll need.
For painting wall edges, it is best to paint the edges first, then paint the rest of the wall surface with a paint roller. There are two ways to paint wall edges near the ceiling. You can either use a paint edger device or use a good-quality angled paintbrush.
Most suitable when combined with light matte walls, gloss finish paint is great for traditional skirting board profiles as it creates a glamorous glass-like look. However, if you're repainting your old boards, a high gloss skirting paint will emphasise imperfections.
Most skirting boards need an oil-based or gloss finish because of their hardwearing properties. It's important here to resist the urge to paint them using any kind of flat emulsion or you'll simply find them dirty again pretty quickly.
Often, skirting boards are painted a neutral or white shade out of habit, but their proportion makes them the perfect opportunity to add a little colour.
Can You Paint Gloss Over Matt Paint? It is possible to gloss over emulsion. Yes, but keep in mind the color underneath. It should be OK if it's a light green, but if it's dark, you may want to sand it down and undercoat it first.
As with other surfaces, emulsion paint can be applied to wood. As an undercoat, emulsion paint can also be used on wooden surfaces, such as door and window frames, spindles, stairs, skirting boards, etc. Once that is done, you can use varnish to seal the wood.
But matte finishes are becoming increasingly popular, and gloss has taken a back seat. Because gloss is shiny and designed to be hard-wearing, painting straight over it won't work, and the paint won't stick. But with the proper preparation, gloss is easy to paint over.
Once you have your paintbrush in hand, it's tempting to cut in along all the trim, the ceiling and the corners in the room. But you'll get better results if you cut in just one wall, then immediately roll out the wall before cutting in the next one.