First, Stop the Water Flow If your toilet has a water shut-off valve, this is the easiest way to stop the water flow and give yourself time to plunge. It's usually located near the wall where the toilet connects. Once you find the valve, turn it clockwise to shut off the water.
🚽Remember, if you turn off the water, and you need more water to help clear the clog, use a bucket to add water in the toilet instead. 🚽The head of the plunger must be fully submerged in order to have enough water pressure to clear the blockage.
In an effort to dislodge whatever is clogging the toilet, many homeowners get overzealous and thrust too hard downward into the toilet with their plunger. A hard thrust downward can break the wax seal between the toilet and the floor, causing a leak. And a really hard thrust could even crack the bowl.
After plunging for thirty seconds, quickly break the seal and remove the plunger. Listen for a gurgling sound from the drain (a good sign) and check the water level in the toilet bowl. If nearly all the water drained from the bowl, then you've probably cleared the clog.
Shut off the water supply.
Until you can get your toilet flowing again, you don't want to add more water to the bowl or risk overflowing. Find the water shut off valve on the wall behind your toilet. Tighten it clockwise to stop new water from refilling in the tank.
You need water, not air, pressure to loosen the clog. If your toilet lacks water, pour in enough water till the plunger is covered. Use a gentle plunge initially since a hard one will force air back around the seal, blowing water all over you and your bathroom floor.
One common question people ask is, “Can plunging make a clog worse?” The short answer is yes, but only if you're not using toilet plungers correctly. Using too much force or plunging too vigorously can push the clog further down the drain, making it harder to remove.
One of the strongest substances for unclogging a toilet is a commercial drain cleaner specifically designed for toilet clogs. These cleaners typically contain powerful chemicals that dissolve organic matter and stubborn blockages.
A vigorous plunge could send water flying up out of the toilet bowl. The best way to avoid this messy scenario is to start with a gentle plunge. Slowly push the plunger down, allowing the air to escape from the cup. Once the plunger is fully submerged, give it a few firm pumps.
Substances like toilet paper and fecal matter will eventually dissolve within the toilet drain and clear the clog organically. However, blockages made from insoluble materials won't resolve on their own and typically require you to fix the clog manually or contact a professional before they worsen.
Leaving a clogged toilet overnight may seem like a harmless way to put off an unpleasant task, but it can lead to more significant issues. The most obvious problem is that the clog might not magically disappear. Instead, it can worsen as the blockage hardens or settles deeper into the pipes.
Align the rubber cup of a toilet plunger over the centre of the hole of the toilet bowl. Apply downward pressure slowly at first, gradually increasing the speed and intensity. If a clog has caused the overflow, a plunger will dislodge the mass and allow water to escape through the plumbing.
Do you plunge a toilet while it's flushing? You can plunge while the bowl is filling, but you're risking a messy overflow. Wait until the flush is complete before you start plunging.
This makes it potentially harmful to your health. That also means you need to sanitize the area around your toilet. So, is it okay to leave a toilet clogged overnight? No, because you risk the clog escalating into a worse problem.
Add 1/2 cup baking soda directly into the toilet bowl water surrounding the blocked toilet. Slowly pour 1/2 cup of distilled white vinegar down the inside of the bowl to avoid splashes. Stand back as a fizzy foam reaction occurs, potentially breaking apart paper. Let it sit for 15 minutes, then flush it repeatedly.
The reason can be various things such as kids flushing toys down the toilet, too much toilet paper, or even a foreign object blocking the drainage pipe. If plunging the toilet doesn't work, here are seven ways to fix a clogged toilet.
If you're wondering, “Can a clogged toilet cause a pipe to burst?” the answer is yes, and it's a situation that requires immediate attention.
You might be using the plunger wrong
If the water level is low, the plunger may not seal properly or achieve the suction it needs to be effective. Pour water into the toilet if you need to. Position the plunger directly over the drain opening and plunge slowly and gently a few times. This ensures you have a good seal.
Drano for toilets is a popular choice for many homeowners when dealing with stubborn clogs. This powerful product has been a trusted solution for many years, effectively breaking down and dislodging blockages that can cause significant inconvenience and potential damage in the bathroom.
If you plunge too fast, you may push some of the matter that's blocking the drain too far down. Take your time when plunging. It's understandable that you want to unblock the drain quickly, but plunging too fast can make matters worse.
Check your water levels
Low water levels in your tank are common causes of toilets filling up with water when flushed. They can also cause slow-draining toilets. You can manually top up your tank with water to help the flush. Then, check the flush tube for cracks and bends that lead to leaks.