The Window Film Company recommends that whenever possible, window film is applied to the interior face of the glass. The window film is fitted using soapy water to enable movement into the exact position, the water is then squeegeed out to let the film adhere to the glass.
The vast majority of the time, privacy window films are installed on the interior face of the glass.
Most installations are interior-applied for a few main reasons: Interior-applied films last longer because they are not subject to the elements (rain, snow, wind, airborne contaminants, etc).
Typically, security window film is applied on the interior of the glass, but it can also be applied to the exterior. If you want added protection, you can install window security film on both the interior and exterior surfaces of your glass doors and windows.
Apply Heat Control films to the INSIDE only. Apply Privacy Control Mirror and Frosted films to the INSIDE only. Apply the Glare Control Smoke and Privacy Control Black films to the INSIDE of single-pane windows, or to the OUTSIDE of dual-pane windows. Apply Decorative films to the INSIDE only.
While interior films offer ease of installation and enhanced aesthetics, exterior films provide superior solar heat rejection, UV protection, privacy, and glare reduction.
Not weather resistant, must be used indoors: Clings are lightweight and durable, but they really should only be used indoors. They are meant to cling to the inside of windows facing out or to metal or plastic surfaces inside of stores.
You can do this from the outside, or if your house has windows that open from the top and bottom, from the inside.
No, Windex should not be used for applying window tint. Windex contains ammonia which can damage your tint. Although ammonia has become less destructive to contemporary films compared to its effects on earlier films, using Windex as a lubricant is still not recommended.
It 's better to put the plastic on the inside as it creates a tight seal so there is air between the plastic & the window & there is no condensation that builds up & it also holds up thru the whole winter where if you put it outside the window the tape that holds it would become dry & brittle in the cold & wouldn't ...
At night, mirrored privacy film will block out 95% of the light to give you a high level of privacy. There will also be a reflection on the window at night from streetlights or other external light sources, this will prevent anyone from seeing in.
As mentioned above, one-way mirror tint works when light on the outside of the tint is brighter than the light inside. Put differently, it works when the sun is up. This also means that, at nighttime, the film does not provide the same level of privacy. Sure, it can be reflective to an extent.
The decision hinges on your specific goals. For heat reduction and glare control, exterior installation is often preferred. If longevity and cost matter more, interior installation is the way to go. Also, remember that there are specialised films designed for both interior and exterior installation.
In conclusion, tinting your house windows can offer several benefits, including reduced heat, increased privacy, and protection from UV rays. However, there are also some drawbacks to consider, such as reduced visibility and the cost of the film.
Window film can be installed on the interior and exterior of windows. The application depends on the kind of window film and the application or what the window film will do. For instance, many window films (or window tints) used in residential homes are applied to the interior.
Window film can stop unwanted air from coming through your window's glass. Window treatment specialists agree that window insulation film is effective. Window insulation film is incredibly easy to install as a DIY project.
Clear Adhesive Side Faces the Glass – For adhesive window films, the side with the adhesive layer typically faces the glass surface. This adhesive side adheres to the glass when the film is applied to the window.
Any window cleaner can also be used instead of making your own wetting solution. The only reason the soapy water solution is preferred is when working with larger pieces of film, the window cleaner might dry too fast. Wash your hands to avoid getting fingerprints on the adhesive backing.
DO NOT use household glass cleaner, vinegar or ammonia to clean the glass immediately prior to film application. Spray the application solution on the inside surface of the window.
Generally, security window film is applied on the interior. If you are looking for added protection you can even install it on both the interior and exterior with an attachment systemattachment system.
By blocking out or reflecting solar energy, they can keep your house cooler in the summer months and reduce the amount you spend on air conditioning. They can also lower long-term maintenance costs in the house by reducing the entry of UV light, which can cause fading and other damage to walls, rugs, and furniture.