Most interior locksets have a pinhole on the outside knob for emergencies. All you need to pick one of these locks is a single straightened-out paper clip to substitute for the pinhole door knob key. Insert the paper clip into the pinhole and push on it to unlock the door.
To do this, unfold the large edge of your paperclip twice until a straight portion juts out. You will be inserting the straight part into the lock to use as a pick. Some locksmiths also put a tiny upward bend into the tip of the pick. This is to depress the pins inside the lock but is not strictly necessary.
Insert the paperclip with a desired end on the keyhole. Move the paperclip in every direction. While moving the paperclip inside, make sure to exert constant pressure to the lock cylinder. Keep the paperclip moving until the Kwikset lock opens.
One of the best-known ways to unlock a deadbolt without a key is by using two bobby pins. Start by inserting the closed "looped" side of one bobby pin into the bottom portion of the lock. Use the second bobby pin, broken in half, toward the top of the lock and move it back and forth.
Start by pulling the bobby pin apart and roughly straightening it as such. Next, stick the straight end of the hairpin about one centimeter, or about 1/3 of an inch, into the keyhole of your lock and apply enough pressure to bend the end of the pin into a hook. The result should look something similar to this.
Even one of Kwikset's most vocal critics, Marc Weber Tobias (more on him in just a bit), told us that the SmartKey lock is virtually impossible to pick. Other videos criticizing Kwikset point out that the lock can be easily compromised using a specialized bypass tool used by locksmiths.
Ideal choices include a small screwdriver or hex wrench, a hair pin, or a heavy-duty paperclip. You can even use a bamboo skewer from the kitchen, or a cotton swab with the fluff removed from one end. If using a hair pin or paper clip, first bend it open so you have a long, straight bit of metal.
To unlock a privacy lock you'll need a flathead screwdriver that is small enough to fit into the hole on the doorknob. Insert your screwdriver into the hole and push forward. If your doorknob is using a push-button type privacy lock, then you should hear a loud click and the door will open.
In picking any keyed deadbolt lock, two basic tools can be used. The first one is the pick itself, a long and solid piece of metal or plastic that can easily fit in the keyhole and won't easily bend if you push it against something.
A1: Some padlocks, especially those for outdoor use, may have a tiny hole in the side of the cylinder slot. One of its functions is to keep the padlock mechanism unaltered over time, expelling water which could stagnate due to excessive humidity or freeze inside the padlock at low temperatures.
The bobby pins will serve as a pick and a lever so you can successfully open the door. In choosing the bobby pins, make that they are sturdy so that they won't break once you start picking the lock. The size of the bobby pins will also depend on the size of your lock.
To pick a lock with a bobby pin, first bend open a bobby pin until it makes a 90-degree angle, and remove the rubber piece on the straight end. Make a slight bend at the tip of the straight end. Now, take a second bobby pin and bend the closed end to one side so it forms a 90-degree angle.
Unfortunately, you can not unlock a deadbolt with a credit card. Credit cards will only work with slanted-latch-style locks. Furthermore, the slant of the latch must be facing you so that you may press it in using your card.