An easy way to add more storage room is with an above toilet cabinet. These cabinets can take advantage of space that usually is just a blank area and add a decorative space for towels, soap, toiletries, decorative accessories and anything else that is needed in the bath space.
The minimum distance needed between a toilet and a vanity is 15 inches. The recommended distance for comfort is 18 inches or more. Aim for at least 21 inches of clearance in front of your toilet.
Code calls for 18" from the centerline of the toilet to the adjacent cabinet, wall or other. The same goes for sinks. The 18" dimension comes from the distance from the center of your chest to your elbow when you arms are 90 degrees to your torso.
Wall-mounted, floating vanities are almost always 34” or 36” counter height.
Yes, you can install shelves for bathrooms over toilets as long as they are properly installed.
The standard height for upper cabinets from the floor is 54 inches, or 4 feet and 6 inches. This means the bottom of the upper cabinets should be this far from the floor. This comes from the sum of 34-and-a half-inch base cabinets, a 1-and-a-half inch thick countertop, and an 18-inch backsplash.
Clearance: Leave at least 21" of space in front of the toilet. Placement: Leave at least 15" of space from the center of the toilet to a wall or another object. To ensure privacy, install a toilet out of direct sight – off to one side of the doorway or hidden behind the vanity.
The correct measurements for a toilet is at least 21 inches in the front of the toilet, 15 inches on the sides, and at least 30 inches from anything else in the bathroom.
The centerline of the toilet shall be 16 inches minimum to 18 inches maximum from the side wall or partition, except that the toilet shall be 17 inches minimum and 19 inches maximum from the side wall or partition in the ambulatory accessible toilet compartment specified in section 604.8.
Toilets: Similar to wash basins, allow 20 cm on both sides for room to move. A 60 cm space is needed in front of the toilet. Bath tubs: A free-standing model needs 55 cm space all round so that people can experience its full effect. A standard bath tub is roughly 170 x 75 cm in size.
Once you've found the studs, mark their location, so you know where to drill the holes for the screws. Next, position the vanity against the wall and use a level to make sure it's straight. Then, drill pilot holes into the vanity at the stud locations and use screws to attach and secure it to the wall.
Any plumbing professional can tell you that the standard is a 12” rough-in, and this is true for both two-piece and one-piece toilets.
Decorate the Top of the Toilet
Install floating shelves for an over-the-toilet storage idea to hold large items, such as a potted plant or framed artwork. Just be sure they're mounted high enough to avoid hitting your head. For additional space, use the top of the tank, too.
You will want a high-quality, waterproof caulk specifically for bathroom use to meet the code. These caulks will withstand the extra moisture and wear of a bathroom. Silicone bathroom caulk tends to perform best for sealing toilets. It's water-resistant and flexible.
To best decorate above your toilet you will want to select a picture frame that is roughly the same width as the toilet tank. Using our Custom Framing page, Hartman Haus was able to upload her artwork and have it printed, matted, and framed to her exact specifications.
The minimum required ceiling height for bathrooms, toilet rooms and laundry rooms is 6 feet 8 inches (2032 mm).
Standard toilet clearance requirements state that toilets must be installed: At least 15 inches to any partition or side wall (measured from its center). 30 inches minimum away from any adjacent fixture (measured center to center). At least 21 inches clearance from a wall, fixture or door.
The minimum space in front of the toilet is 21 inches, though 30 inches is recommended for comfort. Front toilet space clearance ensures that the user has enough room to take care of their needs and that the shower, sink, tub, and door, remain unobstructed.
Minimum clearance of 15" on each side of vanity. Minimum clearance of 21" in front of toilet.
Toilets can fit into spaces as small as 30 inches (76 centimeters) wide and 54 inches (137 centimeters) long, but at least 36 inches wide and 60 inches deep is much more comfortable.
Standard height toilets are typically 14 to 15 inches in height.
Standard Height: The standard bathroom vanity height has always been 30 to 32 inches. If you aren't the tallest, you should opt for a standard height vanity. Plus, these work well for homes with children who use the bathroom vanity frequently.
Generally, a kitchen backsplash is no higher than four inches. However, many homeowners consider that to be a little bit too low, as four inches of backsplash still exposes a lot of the unprotected wall surface.
The Guidelines require a clearance of at least 40 inches between all opposing base cabinets, countertops, appliances, and walls.