When preparing your pool for a storm, leave it uncovered. Installing any kind of cover across the pool will not do much to protect against dust and contaminants because storms often bring strong winds and heavy rain that can cause the cover to lift off your pool.
Cover your Intex pool with a pool cover. Clean and drain the pump before storing it in a dry area where temperatures stay between 32 F and 104 F.
Covering a pool when it is not in use is the single most effective means of reducing pool heating costs. Savings of 50%–70% are possible. Pool covers on indoor pools not only can reduce evaporation but also the need to ventilate indoor air and replace it with unconditioned outdoor air.
You should keep the pump dry and out of the rain. Rain that is allowed to fall on the pump can get into the motor and cause a short circuit, burning out the motor in the process. Cover the pump and never allow water to fall on it from above.
Answer: It should not matter much. It could help to filter debris and contaminants the rain washes into the pool. However, lightning can be a concern with the filter running.
You should cover your pool every night for several reasons. First off, a pool cover saves energy and conserves water by decreasing the amount of make-up water. Also, it reduces the consumption of chemicals, and finally, it saves a lot of cleaning time since it keeps the debris out of the pool.
Conserves Water
A covered pool conserves water by losing less due to evaporation. This means you won't be filling up your pool as often as you did when you were cover-less. If you live in a drought area, using less water is the smart way to go.
So while a solar cover won't actually 'turn your pool green', it will warm your water by up to 8 degrees, so if the other conditions are right, adding a solar cover can easily accelerate algae growth, very rapidly. You need to get the water balance in your pool right before putting the cover back on.
Even in the summer, leaves and other debris from the adjacent landscape can get into an uncovered pool. If you want the convenience of being able to quickly use your pool the next day, covering it overnight can help you achieve this goal, especially if your pool is near trees and other potential sources of debris.
The size of your pool, the efficiency of your pump and filter, and how dirty your pool is are just some of the factors you need to consider. Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day.
When the water in your pool evaporates, it carries with it the heat, consequently cooling down your pool. So, if you can prevent evaporation, then you can significantly reduce the amount of heat loss. As such, covering your pool will help to warm the water up.
Heavy rains will dilute your pool alkalinity level, causing it to fall by 5-10 ppm a day. Low Alkalinity and low pH levels in pools can create a corrosive water environment. Corrosive pool water can result in the damage of underwater metal surfaces, such as pool lights, ladders and rails.
The cover is designed to touch the surface of the water. So your pool should always be filled when covered, and the water level should never go below 18 inches from the top of the pool. Check the water level of the pool and fill it up if it goes below 18 inches.
Your pool will quickly become very dirty, and it may even be unsafe to swim in if you leave it uncovered for more than a day or two. It also makes it much easier to keep your pool clean since the pool cover will catch all this debris.
Heavy rains will deplete many of the chemistry levels in your pool. Generally your alkalinity will drop significantly. It is a good idea to have Alkalinity, Muriatic Acid, Chlorine (or Salt), and Shock on hand to be able to test your water and treat your pool immediately after the rain stops.
Insulating the Pool Water From Heat Loss
The air bubbles in the pool cover act as an insulator in a similar way that a thermos will keep water warm. A pool cover keeps your water warmer for longer.
I know it sounds crazy, but yes, you can use a tarp to heat your pool! The process is simple: just take the tarp out to your yard and lay it on the pool in direct sunlight. The sun will heat up black fabric which will maintain the temperature of your already heated pool.
Protect the pump motor from water damage
In addition to removing circuit breakers, consider moving the motor indoors or covering it with a waterproof material to prevent water from getting inside.
The easiest way to heat up water in a paddling pool fast, is to simply cover it with a couple of bin bags. The unlikely household essential should be placed over the water in the pool and left for 45 minutes. The material warms up the water quickly and it stays warm for the rest of the day in the sunshine.
Generally speaking, you should have the solar cover on the pool whenever the pool is not being used. During the day, having the cover on the pool helps to prevent water and chemical evaporation in the hot sun and also warms the pool.
No matter where you're swimming, avoiding water below 70 degrees Fahrenheit is a good rule of thumb for the average swimmer. The truth of the matter, though, is that 70 degrees is still pretty chilly. You'll probably have a better time if you wait for warmer water. In fact, you'll be safer, too.
It's best to run your pool pump during the day
Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!