Is it safe to put Clorox in a pool?

Author: Enid Blanda  |  Last update: Saturday, April 9, 2022

It is important to know what exactly bleach is before you put it in your pool. Household bleach, Clorox and liquid chlorine can all be used to sanitize a pool. They are all types of chlorine. Household bleaches such as Clorox usually contain about 5-6% available chlorine, about half that of pool liquid chlorine.

What happens if you put Clorox in a pool?

6 reasons why you should avoid disinfecting your pool with bleach instead of chlorine. Finally, if it is not properly dosed, bleach can become dangerous for bathers! Pool water that is too concentrated in bleach can become toxic, irritating the eyes, skin and respiratory tract of swimmers.

How much Clorox do I add to my pool?

When chlorinating wading pools, use 1/8 cup per 100 gallons of new water. Mix required amount of Clorox® Regular Bleach2 with 2 gallons of water and scatter over surface of pool. Mix uniformly with pool water. Empty small pools daily.

How long after putting bleach in pool Can you swim?

Depending on how much you have added and the size of your pool, it is generally safe to wait about 4 hours after adding liquid chlorine or until levels reach 5 ppm or lower.

Can you put bleach in a vinyl pool?

High concentrations of chlorine (above 1.5 ppm) will attack the liner and bleach it, thus damaging it. Any level below this range will weaken its ability to kill off bacteria. The addition of chlorine to your pool water has to be done in a careful manner.

Using Clorox Bleach in Your Swimming Pool

Can you shock pool with bleach?

Add the bleach to the pool during the late afternoon or early evening. Pour it in along the edge of the pool as you walk around the perimeter -- never pour it into the skimmer. Circulate the water for several hours after adding the bleach, to be sure it gets completely mixed.

What is the difference between pool chlorine and Clorox?

The main difference between bleach and chlorine is their strength. Chlorine is much stronger than bleach. To get your pools chlorine level to the point it needs to be to keep the pool looking clean and bright; you will need to use more bleach than you will chlorine.

What can I use instead of chlorine in my pool?

Here are nine alternatives you may want to consider:
  • Bromine: Bromine is used as an alternative to chlorine. ...
  • Ozonation: You can easily install an ozone generator. ...
  • Reduction in Water Temperature: ...
  • PHMB: ...
  • U/V Light: ...
  • Ultrafiltration: ...
  • Mineral Water Pool Systems: ...
  • Pristine Blue:

What happens if you put too much bleach in a pool?

But excessive exposure to chlorine can cause sickness and injuries, including rashes, coughing, nose or throat pain, eye irritation and bouts of asthma, health experts warn. Instructions for safely chlorinating a pool usually call for a maximum of four parts per million when people are in the pool.

How much Clorox do I need for a 5000 gallon pool?

Clorox is considered to be the most common bleach product that is used for pools. It has a 5.7% concentration, so if you have a 5,000-gallon pool, you will be using 3 cups or 24 oz to raise the chlorine levels.

Previous article
What happens if you shock a pool during the day?
Next article
Does pool water go bad?