Is there a reset button on a GE oven?

Author: Theo Becker  |  Last update: Wednesday, August 6, 2025

If you still see an error code on the GE profile oven, a control panel reset is the next step. You can perform a reset by shutting off the breaker that supplies power to your oven. Turn off the breaker in your home's electrical service panel and leave it off for a full 30 seconds. Then, turn the breaker back on.

How do you reset your GE oven?

Turn the circuit breaker to the OFF position or remove the fuse. Wait one minute, then turn the circuit breaker back to the ON position or install the fuse to reset power to the appliance. This should reset the electronic controls on the Range or Wall Oven.

What would cause a GE oven not to work?

If you see physical damage to element, have a service technician replace it. Other causes of a GE electric range oven not working include a defective electronic oven control board, a faulty oven temperature sensor and a wiring failure.

Do electric ovens have a reset button?

No oven has a Reset Button. If you want to reset the unit, you can turn the circuit breaker off for 5 minutes, and turn it back on. This can be enough to reset minor glitches most of the time. Otherwise, if you still encounter power outages or you lose power randomly, this may be a sign of a bad control board.

What causes oven control panel not working?

The most common reasons your oven display is not working are a defective electronic control board, defective control panel or a dead power supply.

How do I reset the control panel on my oven?

How do I factory reset my control panel?

Perform a System Restore in Windows 10
  1. Click Start. , then type Control Panel.
  2. Search Control Panel for Recovery.
  3. Select Recovery > Open System Restore > Next.
  4. Choose the restore point that is related to the problematic app, driver, or update, and then select Next > Finish.

Why did my electric oven suddenly stopped working?

The possible reasons your oven is not working may include a broken baking or broiling element, a malfunctioning spark element (spark electrode), a broken igniter, a blown fuse, an issue with the control board, or outlets not providing enough power to the oven.

Why is my GE stove display panel not working?

The most common reasons your GE range display is not working are an inoperative electronic control board, inopertive control panel or a dead power supply board.

Why won t my GE oven start?

The most common reasons your GE Profile oven is not turning on are a defective electronic control board, defective control panel or a dead power supply.

How do I get my oven to work again?

Troubleshoot an oven that's not heating up
  1. Inspect circuit breaker. If your oven is not heating, it could be the result of a tripped circuit breaker. ...
  2. Check outlet. ...
  3. Inspect heating element (electric oven only) ...
  4. Check oven door seal. ...
  5. Locate temperature sensor. ...
  6. Examine igniter.

How do you reset a GE appliance?

To reset the electronic controls on your washer, shut off the circuit breaker or fuse to the washer or unplug the washer for 2 minutes. For models that have a timer control knob, turn the knob around and back to any position other than final spin for the interrupted cycle. Then, restore power.

What would cause a GE oven not to heat up?

Let's find out with the four most common causes of cold ovens.
  • DEFECTIVE HEATING ELEMENT(S) Down.
  • FAULTY IGNITOR. Down.
  • DAMAGED THERMOSTAT. Down.
  • OVEN NEEDS TO BE CALIBRATED.

Where is the fuse for my oven?

Servicing Fuses

This assembly is usually located under the cooktop of the range. In some units, lift the top of the range to gain access to the fuse assembly; or lift the elements, remove the drip pans, and look on the sides of the cabinets. Inside the oven, look to the back to spot the fuse assembly.

How do I know if my oven element is blown?

The element has blown. There are bright spots or uneven patches on the element when the cooker is in use. The oven trips the electricity when the element is turned on but may work using another i.e. Grill.

How do I test if my oven is working?

Place a small amount of granulated sugar in an oven-proof dish or on a cookie sheet lined with aluminum foil. Place in oven for 15 minutes. If your oven is calibrated correctly, the sugar will melt. If your oven is running cold, the sugar will not melt.

Why does my GE stove work but not the oven?

Is your gas model GE oven not working but burners light with no problem? A faulty igniter is the most likely cause. The igniter must utilize electrical power to open the oven's gas valve and generate an electrical spark to ignite the gas. If it can't perform either of these two tasks, the oven won't turn on.

How do I reset an electric oven?

I suggest you perform a hard reset by shutting off the circuit breaker switch to the appliance for 10-15 min and allowing the system to reset.

What is a common problem of the electric oven?

If the oven is receiving power, various issues could be preventing it from turning on. Common electric oven problems include a broken wire; a bad control, a bake, or broil element; or the wrong amount of power coming to the unit. Common gas oven problems include a faulty gas control, igniter, or valve.

What is the hard reset button?

A hard reset is forcing your phone to restart when it's unresponsive. A factory reset is the process of restoring your phone to its original settings, like when you bought it. Factory resetting erases everything on your device, while a hard reset simply reboots it.

How can I force a factory reset?

Open the Settings app, then search “Reset". Tap Erase all data (factory reset) in the results. Tap Erase all data (factory reset) on the Reset options screen, then tap Erase all data and enter your password or PIN to confirm your decision.

Previous article
What cycle cleans clothes the best?
Next article
Can you use OSB in a garage?