Stain is often cheaper to purchase than paint. It is easier to apply stain, as well as to re-coat surfaces that need a touch up. Stain is quicker to apply than paint, because you don't always need to prime surfaces first. It also only usually needs one coat.
Stain is typically less costly than paint and comes in fewer colors and options. It is typically used for wood projects but there are some options available for concrete as well. However, stain is easier to apply and often does not need more than one coat.
Painting coats the top of wood while stain penetrates the wood. Stain protects and preserves the beauty of your wood compared to paint which covers and hides it. Stain wears away gradually for periodic re-coating. Paint peeling requires extensive scraping.
Painting is generally more expensive than stain, especially when adding in wood preservative and a primer. While it's easier to paint over a stain job, the reverse is not so straightforward. Staining over a painted finish is more difficult and time-consuming, therefore painting is generally a permanent decision.
While staining may take less time than painting, painting often does a better job of filling the cracks, covering imperfections, and provides longer lasting protection. Paint also is typically more rot resistance and does a better job of preventing mold and sun damage.
Most of the time, staining is better than painting a fence. It's true that stain eventually fades and must be reapplied, but not for several years. Also, because stain doesn't peel or crack, it requires less preparation than repainting. Simply power wash the fence to produce a clean, prepped surface for staining.
Stain is more budget-friendly.
Stain runs between $20 and $35 per gallon, while exterior paint suitable for decking ranges from $30 to as much as $60 per gallon. Plus, if painting, you'll have to factor in an extra $15 to $40 per gallon of wood preservative and $15 to $30 per gallon of primer.
Stain before paint is usually the norm! Why? Because if you mess up, you can easily paint over stain, but it's not as easy to stain over paint… often sanding/stripping is required.
Yes! In fact, applying stain over stain is a fairly simple process. It works especially well if you're applying a darker stain over a lighter stain, and while working with raw wood. You can even mix 2 or more stains together and make your own custom stain!
Furniture pieces with mild to moderate flaws that you can sand out are great to stain—the right stain can cover the imperfections and make the item look new again. For furniture with severe flaws that you cannot easily fix by sanding, paint will better cover these issues and make the piece look new again.
The best way to apply stain is with a lint free rag and wiping it into the grain of the wood. Using a lint free rag is the best way to apply wood stain because it is great for controlling the amount of stain that is applied and for removing any excess stain.
Painted cabinets actually cost more in most cases — up to 15% more than stained alternatives. Although, for cabinets with lower-cost MDF (medium-density fiberboard), painting looks better than staining. Staining is more affordable than painting as a general rule.
For the most part, stain is the same as paint. It is composed of pigments and a vehicle, ingredients that perform the same functions as they do in paint. Both stain and paint provide protection and add color, but that is where the similarities stop.
While you can stain over paint, realize that you are creating a unique look, not an authentic stained wood-grain look. For that, first strip off all of the paint, then apply the stain. Paint with greater gloss means that the surface is less porous. The stain will more easily slide off, resulting in a lighter color.
The basic rule for getting good results with any stain is to apply a wet coat and wipe off the excess before it dries. You can use any tool – rag, brush, paint pad, roller or spray gun – to apply the stain. You can even dip the object into stain or pour the stain onto the wood and spread it around.
Sand Thoroughly
The best way to stain wood is to prepare the wood surface by sanding it with a sanding block or orbital sander. Sandpaper with a lower grit number will make wood rougher, allowing more stain to absorb and create a darker color.
Minwax® PolyShades® is an easy way to change the color of your currently stained or polyurethane finished wood. There's no stripping or heavy sanding necessary to remove the old finish!
The key is to apply a thin base coat to partially seal the wood before wood staining. Sanding sealers, dewaxed shellac and wipe-on finishes will all do the trick.
Whether it's wood, metal or plastic, primers increase the durability of the paint or stain to ensure better adhesion to the surface. It is key to note that Primers are not a necessity for a wood stain treatment, especially when the desired finish is meant to show the actual wood grain.
Yes, you can paint over stained wood. In fact, there are numerous correct ways to paint stained wood and the method you choose should depend on the type of stain used, the state of the wood, and whether or not you're painting a piece of furniture or some other structure.
A 12x12 deck costs $226 to $582 to stain when paying someone, or $59 to $176 to stain it yourself. A gallon of stain costs $20 to $50, which covers 200 to 300 square feet. Get free estimates from deck staining companies near you or view our deck stain cost calculator below.
Unlike stains, sealants lack pigmentation and generally provide less UV protection than stains. Stains always include pigmentation, which adds color to the deck and helps protect against UV damage. Even the best deck stains generally offer only moderate moisture protection.
The price of having a professional paint or stain your fence averages $2,000. Homeowners could pay anywhere between $750 to $4,250 depending on the condition, height and length of the fence. Costs average $3 to $17 per linear foot or $1 to $2.50 per square foot.
Painting or staining a wood fence can help your fence last longer and look better. Either one will extend the lifespan of your fence by giving it some protection against rot, insects, wear, and tear. However, of the two we always recommend that you stain a fence rather than painting it.