Pine-Sol is also safe for luxury vinyl wood plank flooring and vinyl tile flooring, so long as used with a dry mop and you do not saturate the floors.
Something I found googling ``Yes, Pine Sol on vinyl floors is a fine option; however, use sparingly with water. Do not oversaturate your vinyl floors with too much water, use just enough to disinfect the floors.''
Don't use ammonia or ammonia-based cleaning solutions. Ammonia can break down the vinyl and cause it to crack. Don't use a steam cleaner on vinyl plank flooring. Though vinyl can sometimes be impervious to water, it won't stand up to both the water and the intense heat produced by steam cleaning.
Yes, you can use vinegar as a natural and effective cleaner for vinyl plank flooring. Mix one cup of white vinegar with one gallon of warm water to create a gentle cleaning solution. Vinegar helps to dissolve dirt and grime without leaving behind residue.
Pine-Sol® is safe to use on wood floors, though it is not recommended for use on unfinished, unsealed, unpainted, waxed, oiled or worn wood.
Pine-Sol® is not recommended for use on marble, aluminum, or unsealed, waxed, oiled or visibly worn wood. Q: Where should I NOT use Pine-Sol® Cleaners? A: We do not recommend using Pine-Sol® Original Multi-Surface Cleaner on aluminum, copper or marble surfaces.
A: Great questions. Our Swiffer Wet cloths are designed with a pH close to neutral. As well, these cloths have been tested to be safe for use on vinyl plank flooring.
While vinegar is a common ingredient in many homemade floor cleaners, it shouldn't be used on certain household surfaces because it can cause damage. Fortunately, luxury vinyl flooring isn't one of those surfaces. In fact, apple cider vinegar makes an excellent vinyl floor cleaner.
Generally speaking, most luxury vinyl planks can be cleaned using soap and water and don't require a special LVP cleaner. A dishwashing soap like Dawn is the best way to clean vinyl plank flooring because it will cut grime and grease without stripping your floors or damaging the wear layer.
A good old-fashioned sponge mop and water work quite nicely to clean vinyl flooring. Vacuum and mop regularly, approximately once or twice a week, and address any spills, wiping them up pronto with a pH neutral cleaner.
Pine-Sol is safe for ceramic tile; however, it can eat away at grout between those tiles! In turn, avoid diluting Pine-Sol in a bucket and using it over the entire floor. Instead, make up a small mixture and dab it on dirty areas with a rag. Afterward, ensure you rinse all the Pine-Sol off the floor.
Pro Tip: Avoid using wax polishes, abrasive cleaners, and harsh chemicals such as bleach or ammonia-based cleaners, as they can strip off the floor's protective layer over time. We also advise against using vinegar to clean your luxury vinyl floors.
Commercial vinyl floor cleaners are available, but you can make a simple, effective cleaner for vinyl floors by mixing apple cider vinegar with water. The vinegar's acidity removes dirt without leaving a soapy film. Mix one cup of cider vinegar with a gallon of hot water.
Our two favorites are the WOCA Spray Mop and Bona Premium Microfiber Mop. We use these mops to clean all types of flooring, including the luxury vinyl plank in our showroom.
Bona has everything you need for maintaining and cleaning vinyl floors; from vinyl floor cleaners to mops and vinyl floor polish. Whether you have luxury vinyl tile, luxury vinyl plank or sheet vinyl flooring, Bona has you covered.
While steam mops offer a deep clean for many surfaces, they are not be the best choice for vinyl flooring due to the potential risk of heat and moisture damage. Instead, stick to our recommended cleaning practices with regular vacuuming and mopping with a damp microfiber mop and gentle cleaner.
DO NOT use All-Purpose or Multi-Purpose cleaners, detergents, abrasive cleaners or “mop and shine” type products (such as Bleach, Pine-Sol, Clorox Soft Scrub, Fabuloso, Rejuvenate, Mop & Glo, Mr. Clean, Murphy's Oil Soap and similar, unapproved cleaners), as they will dull the finish and sheen of the flooring material.
Pine-Sol is also safe for luxury vinyl wood plank flooring and vinyl tile flooring, so long as used with a dry mop and you do not saturate the floors. Use sparingly with a thin/light/barely damp application.
That's because the chemicals in your floor cleaner leave behind a residue. Not only does this residue make your floors sticky, it can also lead to a cloudy appearance and discoloration on wood floors. Fortunately, you can follow these steps to remove floor cleaner residue.
After cleaning with diluted Pine-Sol, make sure you rinse thoroughly. Using a damp mop with plain water after cleaning can help ensure no residue is left behind.