SAFE TO USE AS OFTEN AS NEEDED to maintain a water-repellent shield against soap scum, hard water stains, and more. This shower cleaning spray works on most shower and tub surfaces including tile, fiberglass, acrylic, plastic, glass, and mirrors.
It will also clean most stains on fiberglass, teak, and sails. I love this stuff. OxiClean does not ruin clothes when used properly. Like most “oxygen bleaches” it is simply a sodium percarbonate compound which, when dissolved in water, breaks down into sodium carbonate and hydrogen peroxide (H2O2).
Tip #1: I found that using OxIClean, or generic dollar store stuff works great. I filled the tub full of water, then put whole small container of the stuff in there, let it sit, scrubbed with toilet bowl scrubber a bit.
OxiClean™ Bathroom Cleaner. This powerful spray cleaner is the only one you'll need to tackle stains in your shower, tub, sink, and even grout. Tough bathroom stains don't stand a chance against OxiClean™ stain fighters that power through grime and stains on all kinds of surfaces.
Avoid using stiff-bristled scrub brushes, scrubbing pads, and abrasive cleaners on your fiberglass tub.
Cleaner is safe on all bath care products like shampoo, soap and bath sponges. Safe for use on most shower and tub surfaces including fiberglass, acrylic and plastic.
Don't use OxiClean on wool, silk, or other off-limits fabrics.
Oxygen bleach Oxygen bleach (like OxiClean) is an alternative to chlorine bleach, and it's safe for many fabrics. You can use it to remove stains on colors, as well as whites. It doesn't contain scary chemicals and it won't ruin most fabrics—though you should avoid using it on silk or leather.
How to Clean Fiberglass Tub With Baking Soda and Vinegar. One of the easiest ways to weekly clean a dirty tub is using baking soda and vinegar. Whether you have mildew, stains, soap scum, or just need a good weekly cleaning, this method can quickly and easily wipe it all out.
Mold and mildew love damp conditions, and it doesn't take long for visible stains and musty odors to develop on the fabric of your favorite clothing. OxiClean is a popular choice for tackling mold on clothes. It's oxygen bleach, which is gentler than chlorine bleach but still effective for killing mold and mildew.
Acetone is very effective as a thinner, cleaning solvent, or remover for fiberglass resins, polyester and epoxy resins, adhesives or contact cement, ink, latex paint, and uncured lacquers. It is also excellent at degreasing metal work.
A gentle liquid soap — just like that used on your hands or dishes — will also disinfect against COVID-19 virus on either fiberglass or polycarbonate. Rinse thoroughly so-as to remove any build-up of residual soap. Vinegar also works well as a natural, inexpensive disinfectant on fiberglass.
Use baking soda to tackle caked-on dirt.
Follow up by cleaning the area with soapy water. The paste may turn a brownish color when it sits on the dirtier areas of fiberglass. You can use vinegar to activate the baking soda after it sits on a fiberglass surface for deeper cleaning power.
Hydrogen Peroxide: fill a spray bottle with 3-percent hydrogen peroxide. Let the solution sit for 10-15 minutes and then wipe the tub down with a damp sponge. You can repeat these steps until the yellow staining disappears.
It can strip the top, protective layer off of the. fiberglass creating hard to remove stains. It can even. cause the fiberglass to yellow.
It's really easy and it works SO well you won't even believe it: Fill the tub with hot-hot-hot water and when it's about a third or so full add a big scoop of oxygen bleach like OxiClean, Biokleen Oxygen Bleach Plus or Clorox Oxi Magic then allow it to fill all the way up to the top. Then leave. Yup!
WARNING: Injurious to eyes. Harmful if swallowed. Contains sodium percarbonate and sodium carbonate. Avoid powder or solution contact with eyes and prolonged skin contact (wear gloves).
By comparison, OxiClean suggests that you don't leave it on a garment for more than six hours, because it can start to damage the fabric.
Bar Keepers Friend cleans porcelain, tile, fiberglass, and more. Our products have even been known to save customers from having to replace their tubs and shower tiles. It's often considered one of the best bathtub cleaners.
Yes, CLR is safe on fiberglass. Begin with a mixture of CLR and water and progress to full strength if needed.
One popular way to clean a fiberglass shower is with baking soda. You can combine baking soda with clean water to form a sort of paste, which you can apply directly on any stained areas of your shower. When you're done, you will want to rinse your shower several times with warm water.