By removing the dirt and debris, your pavers will retain their luster longer. If you sweep your paver patio and driveway, and you want it to look even better feel free to wash the pavers with clean water. You can use some soapy water, but be sure to rinse thoroughly your pavers. A simple garden hose will do the trick.
Paver patios that are constructed properly need very little care. Once a year, we recommend cleaning the patio with a mild, plant-safe detergent to remove dirt, debris, and build-up. Although not required, this keeps your patio looking like new.
Routine maintenance. Routine maintenance is the best way to keep your pavers looking new. Sweeping and hosing them down regularly will help remove dirt and debris. You may need to use a power washer for tough stains.
There are useful tools for cleaning paving stones, such as joint scrapers, sweepers, and pressure washers. In addition, pavers can be cleaned with a small pickaxe, broom, and garden hose.
To clean paver slabs, you can use a detergent, such as Dawn, or a vinegar-water solution that is gentle enough to effectively clean without causing damage to your concrete pavers.
Yes, you can pressure wash your pavers. But while using a pressure washer at a basic level is simple, ignorant and inexperienced users can easily damage their pavers by using a stream that's too powerful, by holding the wand too close to the pavers, or by falling into any number of other rookie mistakes.
The acetic acid in vinegar is a little stronger than acid rain, so exposing your pavers to this substance can lead to bleaching, corrosion and the loss of protective sealant.
Water and mild dish soap is a popular cleaning solution because it's easy to find at home and it won't damage brick, but it will tackle stains. The BIA recommends using hot water for surface cleaning with a detergent. White vinegar and water, another common household cleaner, can also be used on mildew.
Use a specialist cleaner
Try a specialist cleaner like Wet & Forget, at Walmart, which you spray onto the surface of the paving and leave. It can also be used on steps, fountains, patio umbrellas and other smaller outdoor areas. It's bleach-free and non-acidic but will remove mold, moss and grime without any scrubbing.
Pavers should be resealed every 3 to 4 years on average. You will know when your pavers need to be resealed because water will stop beading on the surface and the sheen will diminish. In addition, you may notice weeds starting to grow in between joints and the pavers may start to lose their color.
The basic rule of thumb is every 3-5 years. For film-forming sealants, you will be able to notice when the physical barrier is showing signs of wear. For non-film-forming sealants, you will begin to see a significant color change of pavers during a rain when the sealant is wearing thin.
To keep pavers looking their best, plan to clean and reseal them every three to five years. Clean your pavers each Spring with a coarse-bristle “stable” broom and a paver cleaner to keep them looking like new. Some weeds, if left unaddressed, can shift pavers apart over time.
The good news is that pavers are known for their durability and lifespan. Made of clay, concrete, natural stone, or even porcelain, pavers can last 20-25 years without any major repairs with proper care and maintenance. If they are properly cared for and sealed, concrete pavers can last upwards of 50 years.
It's recommended that the scheduling of these projects should be in early spring, right after the winter frost has melted. Here, you will find a few important reasons behind this guidance. Working outdoors is easier when it's not too cold or warm for comfort.
Paver sealant is a great tool to keep paver driveways, patios, walkways, and pool decks, in mint condition, but it's not always necessary. While it's not a must-have, pavers that aren't sealed typically grow weeds in the cracks, lose color over time, and can even have shifting caused by a lack of joint sand.
Similar to cleaning pavers with muriatic acid, avoid an intense concentration of bleach, as it can damage the pavers.
Simple Green is one of the best cleaning products for dirty pavers. It doesn't have any harmful chemicals that could possibly warp your precious driveway. Less chemicals mean there's a less likely chance your paver stones will change to a weird-looking color.
You can't cover your patio with copper sheets, but you can spray on a liquid solution of copper that will soak into the top surface of the concrete pavers. This copper will stop the growth of the pesky green and black organisms in their tracks. The easiest way to apply the copper is to buy copper sulfate crystals.
OxiClean is a powerful concrete cleaner that works well on various materials, including pavement and grout. This concentrated solution provides excellent cleaning without leaving residue.
Try Concrete Stain
The simplest path to reviving tired pavers is to apply an acrylic-based semitransparent concrete stain, such as Behr Premium Semi-transparent Concrete Stain ($27/gal.; Home Depot) or Valspar Semi-transparent Concrete Stain ($28/gal.; Lowe's).
An influx of water that sits for a long period of time can damage your paver surfaces by weakening the cracks or chips already present. If your pavers are already loose, they may collapse. Flooding can also lead to erosion when soil and rock are transported and deposited into the area.