Yes, up to a certain point, more blown-in insulation is better because it increases your home's thermal resistance (R-value), preventing heat transfer and lowering energy costs. However, applying too much creates diminishing returns and can cause significant moisture and weight issues for your roof and ceiling.
For most attics, blown-in insulation should be installed to a depth of 10 to 20 inches, depending on your climate and the insulation material you use. This achieves the standard recommended thermal resistance (R-values) of R-30 to R-60.
Yes, mice strongly dislike cellulose insulation, though it is not a 100% foolproof deterrent.
The healthiest insulations for a house are natural, bio-based materials that offer excellent thermal performance without off-gassing toxic chemicals. The safest and most non-toxic options available are sheep's wool, hemp, cotton (denim), and cork.
Insulating a 2,000 sq. ft. attic costs between $2,000 and $9,000 on average, depending on the material and labor needed. Blown-in fiberglass or cellulose usually runs $2,000 to $4,000, while premium spray foam costs $8,000 to $18,000+.
The best time of year to insulate your attic is early fall or late spring. These transitional seasons offer the most moderate weather, making it safer and much more comfortable for you or a contractor to work in a space that can otherwise reach sweltering temperatures.
For most attics, blown-in insulation is better because it easily fills awkward corners, gaps, and tight spaces around wiring or joists. Rolled insulation is better if you are on a strict DIY budget or if you use your attic for storage and need to build walkways over the joists.
Banks and mortgage lenders often dislike or outright reject homes with spray foam insulation because it can trap moisture against roof timbers, leading to hidden wood rot, mold, and structural decay. Additionally, the foam conceals the roof structure during valuations, making it impossible for surveyors to assess the roof's true condition.
There is no single "best" insulation for every situation; it depends entirely on your climate, budget, and whether you are building new or retrofitting. However, for overall performance, closed-cell spray foam is widely considered the premium standard.
Yes, mice can chew through and tunnel in rockwool (mineral wool) insulation. While rockwool is denser, fireproof, and doesn't provide nutritional value, its loose fibers and coarse texture actually make it an attractive material for mice to gather and shape into nests.
The Amish control mice through non-chemical, self-sustaining methods, relying on active trapping, natural scent repellents, and structural exclusion. Rather than using commercial poisons, they focus on physical barriers and natural predators to keep rodent populations in check.
Buyers often walk away from homes with spray foam insulation because it can cause major mortgage and insurance denials. The foam tightly seals roof spaces, trapping moisture, and covers up structural timbers. This makes it impossible for surveyors to inspect for hidden rot or damage, which can lead to catastrophic repair costs.
A rat's biggest overall enemy is humans. Through habitat destruction, urbanization, and extermination efforts, humans pose the greatest threat. In the animal kingdom, their primary natural predators include birds of prey (like owls and hawks), snakes, wild canines, and felines.
For 1,000 sq ft, you will typically need 20 to 50 bags of blown-in insulation, depending entirely on your target R-value and material.
Yes, insulation is tax-deductible in the form of a federal tax credit, specifically the Energy Efficient Home Improvement Credit (Section 25C). You can claim 30% of the cost of insulation and air sealing materials, up to a maximum annual credit of $𝟏,𝟐𝟎𝟎.
To see if your attic is properly insulated, measure its depth with a ruler or tape measure: aim for 13 to 14 inches for cellulose (R-38) and 10 to 12 inches for loose-fill fiberglass. If your insulation is below the tops of the floor joists, you definitely need more.
The healthiest home insulations are natural, breathable materials that are free of VOCs, chemical binders, and off-gassing plastics. Top non-toxic choices include sheep’s wool, hemp, cellulose, and recycled cotton. Unlike conventional fiberglass or spray foam, these materials naturally manage moisture and pose no respiratory or skin hazards.
People remove spray foam insulation primarily because poor installation or improper use traps moisture. This hidden condensation causes severe wood rot, mold growth, and pest infestations. Additionally, the inflexible barrier can strain roof timbers and prevent surveyors from assessing the home's structural condition, which often leads mortgage lenders to reject loans.
Insulating a 2,000 sq ft house typically costs between $3,000 and $12,000 fully installed. Prices range from $1.50 to $6.00+ per square foot, largely depending on your material choice, whether you are retrofitting existing walls, and if old insulation needs removal.
Yes, mice can easily chew through foam insulation. Foam lacks structural integrity, and its soft texture makes it a prime target for rodents looking to create nesting tunnels or sharpen their teeth.
The cheapest and most effective insulation overall is blown-in cellulose for attics and fiberglass batts for open walls. Both materials provide excellent thermal resistance (R-value) for their price and are widely accessible for both DIYers and professionals.
WD-40 affects foam depending on the foam's type and whether the foam is wet or cured. It will melt or dissolve polystyrene (Styrofoam), act as a solvent to remove uncured polyurethane foam, and leave closed-cell foam intact while temporarily softening it.
Yes, mice love blown-in insulation. Because it is soft, warm, and easy to burrow through, materials like loose-fill fiberglass provide an ideal environment for nesting and breeding.
Blown-in attic insulation should generally be 10 to 14 inches deep to achieve an R-38 value, or up to 16 to 18 inches deep to reach an R-49 value. The exact depth depends on your local climate, whether you are using cellulose or fiberglass, and if you are topping off existing insulation.
Yes, it matters significantly based on your specific application and climate. Facing acts as a vapor retarder to block moisture. Using the wrong type can trap moisture inside your walls, leading to dangerous mold, mildew, and rotting wood.