If you've misplaced your key and need to get into a locked barrel or cylinder, the quickest way to get in is to drill them. This task can be completed with a power drill and either a cobalt or carbide drill bit, as well as a hammer, punch, and screwdriver.
Drill a hole through the lock cylinder through the guidance point. This destroys the pins inside the lock cylinder, allowing you to force the lock open. Most locks have about five tumbler pins to drill through, although some have six or more.
The Locksmiths Hardplate TCT (Tungsten Carbide Tipped) Drill Bits offer an ideal solution to any drilling that is required.
Instead of one row of pins, tubular locks have pins positioned all the way around the circumference of the cylinder plug. This makes them much harder to pick. Conventional lock-picking techniques usually don't work on this type of lock. Some pin-tumbler locks have modified pins that make picking more difficult.
Tubular locks are a high security lock designed to make picking difficult. The pins are set in a circle with the key being a tube-like item with the cuts around the outside. Because of the high security a tubular lock can offer, it is often used in gun safes, vending machines, and computer locks.
Drilling is the most common method used by locksmiths, and is commonly used in cases of burglary attempts, malfunctioning locks or damaged locks. In observational attacks, the drill hole allows the safecracker to view the internal state of the combination lock.
Cobalt drill bits are used for drilling hard metal and steel. They dissipate heat quickly and are highly resistant to abrasions, making them better for drilling into hard metals than black oxide- or titanium-coated drill bits.
Unfortunately, it has never been easier to break into a property with a standard euro cylinder lock. By simply purchasing basic hand tools from any DIY store a euro lock cylinder can be snapped in just 5-10 seconds.
Keyed to differ is standard, and every cylinder comes with its own set of keys unique to that cylinder.
As a solution to this, it is possible to construct cylinder locks so that multiple locks can be operated by a single key commonly known as a “Master Key”. It's further possible to have multiple locking cylinder groups and multiple master keys all part of a suite of locking cylinders – we call this a Master Key System.
1) EVVA MCS
Each key has a complex rounded shape, this coupled with the magnetic element makes it an extremely hard lock to pick. The only way to gain access to the door would be for the key to be cloned, and in that case, a master locksmith would need to get their hands on the original key.
In the U.S., there is no single comprehensive law against dual-cylinder deadbolts. Individual cities and states have local property and fire codes that may prohibit the use of dual-cylinder deadbolts. The code may prohibit the use of dual-cylinder deadbolts in some buildings and allow them in others.
Cylinder locks, however offer even higher security compared to a 5 lever lock. A standard cylinder lock offers more than 3 000 key differs. A master-keyed cylinder offers up to 10 000. This makes it highly unlikely to have a key nearby that would open your lock.
A typical tubular lock features a solid central cylinder, a circular imprint, and an outside metal ring. If you look inside the imprint, you'll find six to eight pins.
You can find the ignition switch cylinder at the top of many vehicle steering columns. It's used to lock and unlock the steering wheel, power windows and other accessories in vehicles that have power steering. You can remove the cylinder with a set of vice grips if you're unable to use the key to unlock it yourself.
K tool: The K tool is used to remove a cylinder lock. The K tool itself consists of a steel block roughly 3 x 3 inches by 1-inch thick with a K-shaped notch on one side, having sharp edges that grip the cylinder, and a U-shaped flange on the other side.