Liquid chlorine is preferred over chlorine tablets by pool professionals however home swimming pools will benefit too. Liquid chlorine quickly raises or maintains chlorine levels without raising stabilizer. Chlorine tablets maintain chlorine levels and add stabilizer to the pool water.
Chlorinating tablets and chlorinating liquid are both suitable sanitizers for your swimming pool when applied according to label directions. Choose the sanitizer that best suits your individual preferences. *1 gallon of chlorinating liquid delivers the same amount of chlorine as 2 chlorinating tablets.
All pool chemicals, aside from unstabilised liquid chlorine, are good for up to three to five years as long as they're stored in a cool and dark place away from sunlight and they're packed in air-tight containers.
If you want to shock your pool then liquid chlorine will be the perfect fit. But if you want convenience, a stack of chlorine tablets is the way to go. It also helps that tablets are cost-effective too and have a long shelf life.
Liquid chlorine is generally less costly than granular shock and comes in refillable containers, where granular shock does not. Liquid chlorine does not need to dissolve in your water as it is already in liquid form. In addition, liquid chlorine is non-scaling and leaves no residue.
Liquid chlorine
They are identical in every way, with the exception of strength. Household bleach is usually a 6% concentration (although some of the cheaper stuff is 3%), while pool chlorine can typically be found in strength between 10% and 12%.
Liquid chlorine may be a good choice if you have a large pool, but the costs associated with it, and the available chlorine per pound could mean that chlorine granules are the better option. In the end, both liquid chlorine and chlorine granules will do their job and keep your pool clean and clear.
Sodium hypochlorite (also known as liquid chlorine) is another frequently used option for shocking pool water. This is a common choice in pool shock because you can pour the solution directly into the pool without having to dissolve the chlorine in water beforehand.
You'll need about 52-104 oz of liquid chlorine per 10,000 gallons of water. This amount should get the chlorine level to between 5 and 10 ppm.
The reason why trichlor tablets are so expensive and why they are sold out at many pool supply stores is because of the national trichlor supply shortage.
Liquid chlorine and granular shock have the same active chemical that sanitizes your pool, what changes is the strength and the way you use it. Liquid chlorine is less costly, unstabilized and comes in liquid form. Granular shock is stabilized and comes in a solid form that dissolves in your pool.
Dichlor is perhaps the most “best of all worlds” chlorine sanitizer. It is typically found in concentrations of 60-65%, which is comparable to cal-hypo. It is a powder sanitizer, which makes it easier to spread or broadcast around the pool than chlorine tablets.
Shock is liquid or granular chlorine. You should add one gallon (or one pound) of shock per 10,000 gallons of pool water every week to two weeks. During hot weather or frequent use, you may need to shock more frequently.
Rangeball is correct in that Chem Geek has estimated that the cost of using trichlor (pucks) is the cheapest way to chlorinate a pool. Possibly short of adding a Salt Water Chlorinator, it is also the easiest.
What are safe levels of chlorine in drinking water? Chlorine levels up to 4 milligrams per liter (mg/L or 4 parts per million (ppm)) are considered safe in drinking water . At this level, harmful health effects are unlikely to occur.
For the greatest protection against algae, bacteria, and cloudy water, Intex pools should maintain a chlorine level of 2.0-4.0 ppm at all times. If you opted for the Intex Salt Chlorinator, you can make your own chlorine by adding the correct amount of Pool Salt to the water.
INITIAL STARTING DOSAGES :
Maintain chlorine at a minimum of 1.5 ppm and up to 3 ppm. The more swimmers you have and the warmer the water is, can double your pool's chlorine consumption. Add whatever amount of chlorine it takes to maintain a 1.5 ppm chlorine..
To superchlorinate, add AT LEAST 2.5 ounces (5 tablespoons, 75 grams) of chlorine for every 100 gallons (400 litres) of spa water or part thereof. Adding more is fine and never a bad idea.
Brown pool water is often caused by metals (iron) becoming oxidized in the pool water. If you shocked your pool water and it turned brown you probably have metals. Oxidized iron usually turns a brown or rusty color in the water.
Superchlorination, also known as shocking or chlorine shocking, is the process of adding several times more chlorine to the pool than is normally needed so that the chlorine can "burn" through resistant compounds, chemicals, oils and strong types of algae.
Using liquid chlorine raises the pH of the water.
Liquid chlorine does not raise pH. When added to water, liquid chlorine (which has a pH of 13) makes HOCl (hypochlorous acid – the killing form of chlorine) and NaOH (sodium hydroxide), which raises pH.
Common unscented household bleach (sodium hypochlorite) works well to shock a pool.
Answer: It is true that pool chlorine is stronger than bleach. For bleach and water to be the same strength as pool chlorine and water, you would have to adjust the ratio, increasing the bleach and reducing the water. But no matter which chlorine you use, make sure to test a small area before doing the job.
Short answer: yes. Longer answer: it depends on the formulation. The label on every bleach bottle should tell you the ratio of sodium hypochlorite (and available chlorine) in the bottle to everything else. A higher percentage is generally better, as you'll need to use less bleach to treat your pool.