Kwikset's Kevo Bluetooth (BLE) smart locks for doors can finally integrate with home automation systems thanks to a new Home Connect Bridge that translates ZigBee and Z-Wave commands into Bluetooth for controlling the lock.
For novices, Kwikset Convert, in combination with any one of dozens of Z-Wave home automation hubs, provides an easy-to-install, cost-effective entry into the home automation arena.
Most Kwikset locks have a learn button that is labeled "A". This button is found underneath the device's cover, and it is used for including and excluding from the Z-Wave network. It is usually a smaller button, and it should not be confused with the "B" button or the "Program" button.
The Kwikset Signature Series deadbolt with Home Connect featuring Z-Wave™ protocol to enable true remote locking and unlocking. Homeowners can remotely access and control the lock from anywhere in the world, using a smartphone, tablet, or Internet-connected device.
The Kwikset Home Connect 620 is a Z-Wave 700 Smart Lock with a 10-digit keypad.
Z-Wave is a wireless protocol harnessing low-energy radio waves to help smart devices or appliances communicate successfully with one another. Zensys from Denmark developed Z-Wave in 2001. The stated goal was to create a cost-effective Zigbee alternative enabling devices from different brands to communicate in harmony.
The outstanding user oriented APP is the only Smart Home APP available on the market integrates the Z-wave sensor, Z-wave IP gateway,P2P IP camera in the single APP page.
Press and HOLD the Program button while reinserting the battery pack. Release button once battery pack is installed. The status LED will flash red and green. Press the Program button once more.
The 914 has the same features as the 913 but with Wireless Capabilities. HomeConnect™ technology with Z-Wave. Home Connect technology will allow the lock to talk wirelessly to security and home automation systems via Z-wave. Up to 30 user codes for family & quests.
Kevo is not currently Apple HomeKit-compatible. Kevo requires a longer development process to become compatible with HomeKit due to the custom nature of the Kevo platform.
Thirty-four (34) different smart home products from Kwikset have been reported as being compatible with Aeotec Smart Home Hub and the SmartThings gateway platform.
Although Kevo works just fine with Amazon Alexa, and SmartThings supports OTHER models of Kwikset smart smart locks, there is no integration with Kwikset Kēvo.
That's why all new eero hardware comes equipped with a Thread radio. Thread is the latest generation in a series of low-power wireless protocols like Z-wave, Bluetooth, and Zigbee, but because it uses IPv6 natively, it's more reliable, and employs secure protocols and encryption by default.
Amazon Alexa owners can now add voice control to their Z-Wave devices within their smart home network. The marriage of these two technologies is enabling smart homeowners to control lights, adjust thermostats, change music and unlock doors.
If you're looking to get into Z-Wave devices for your smart home you'll need a certified Z-wave hub (officially called a Z-Wave Controller). This device is required to form the heart of your Z-Wave network and allow for connection to your normal home network so your smart phone or computer can talk to your devices.
With a Z-Wave Controller, one can control many aspects of their home. On the security front, you can control your garage door, smart locks, and smoke detectors. You can also control lighting, power outlets as well as monitor water and energy thanks to its numerous features.
Z-Wave devices create what is called a "mesh network." Unlike a traditional "hub-and-spoke" network where each device only communicates with a central hub (access point), Z-Wave devices can communicate with each other in addition to the central hub.
Z-Wave Has Fewer Congestion Problems
As such, Z-Wave's network has much less congestion, as it operates on a lower radio frequency - 908.42 MHz. Zigbee's frequency is closer to that of Wi-Fi - 2.4ghz - meaning a lot more congestion.
All Ring devices are Z-Wave compatible. Ring Alarm's base station operates as a Z-Wave hub, so the elements of the Ring Alarm system can communicate with each other without interfering with your home's Wi-Fi network.
Kwikset's Home Connect locks allow you to wirelessly communicate with devices in your home, such as lighting, thermostat, security system and more. This integration can provide valuable security and convenience on a daily basis through customizable features that work in conjunction with your home automation system.
Meet the App. Available for iOS & select Android devices, the smart lock app controls Kevo right from your smartphone or tablet. Grant access with eKeys and monitor who is locking and unlocking.