Will Vinegar Damage Concrete? Cleaning concrete with vinegar will not damage it! However, saturating concrete for an extended period will damage the cement that binds concrete together. Over time, vinegar erodes the concrete itself, so be careful.
Yes, vinegar is an excellent concrete cleaner. This solution can strip surface-level messes from concrete. Due to its acidic properties, vinegar can be a powerful tool for breaking down offensive materials such as dirt, stains, and bacteria. However, vinegar's acidic nature may be terrible for other materials.
Vinegar and Baking Soda
If you're cleaning your concrete patio or sidewalk and you're worried about nearby plant life, this is your solution! Simply fill a spray bottle with equal parts water and vinegar (or water and baking soda), and add a little bit of liquid dish detergent.
Dish soap and water: Dish soap is a degreaser, and it works well to clean oily and grimy concrete. Create a cleaning solution of warm water and few drops of dish soap and apply it to the surface. Let it sit for a while, then mop the patio and rinse it with fresh water. Repeat the process as many times as needed.
Natural Stone Countertops. Granite, marble and concrete are porous. Spraying these surfaces with vinegar can cause etching and loss of shine.
Spraying a vinegar solution (1 cup of vinegar per gallon of water) onto the surface, saturating it fully, should kill most strains of mold. Vinegar spray can be followed by power washing or manual hand scrubbing to remove the dead mold.
White vinegar is good for cleaning pavers, though it's also acidic enough to erode the stones' surface. Diluted vinegar can be used safely to clean paving stones, though it should be used sparingly and infrequently to protect your paving from damage.
Use a mild grease-cutting detergent such as Dawn or Ajax dishwashing liquid mixed with water and a natural or synthetic bristle scrub brush to help brighten the patio surface. NOTE: Never use a wire brush as it can leave rust stains and scratch the concrete surface.
Despite the signal word danger on most such labels, gardeners may instead just see vinegar and be careless. Sobering details: In concentrations over 11%, acetic acid can burn skin and cause eye damage, and concentrations of 20% and above are corrosive to tin, aluminum, iron, and concrete and can even cause blindness.
We found several “recipes” for cleaning solutions that can be used on unsealed cement garage floors. Here are three of the most common: Recipe #1 – Mix 2 tsp. dish soap, 1 cup white vinegar and 1 gallon warm water in a bucket.
Combine 1/4 cup of liquid bleach with 1 gallon of hot water in a large bucket. To avoid damaging your lawn or walkways, always dilute your bleach and control your runoff when rinsing. Soak your brush in the solution and scrub the entire area until it's fully saturated.
Using harsh chemicals and certain cleaners can damage the floor, dull the shine further, and even discolor the polished concrete. Some of the things you don't want to use on your polished concrete flooring include: Vinegar. Windex.
If your area is more prone to algae and mold, then you may want to wash your concrete more often. You should pressure wash your concrete at least once a year to protect your concrete and the value of your home. Using a concrete sealer can also prevent damage to your concrete after it has been washed.
Driveways and Sidewalks
If you don't have access to a pressure washer, you can use Super Clean, a hose and a garage broom to get similar results. Spray the area down with cold water, spray on some Super Clean and let it sit a few minutes. Work it into the concrete with the garage broom, and rinse with the hose.
Grab Hydrogen Peroxide
For a natural, stronger solution to tackle stubborn stains on concrete surfaces, mix flour and hydrogen peroxide into a paste the consistency of peanut butter. Spread it over the stained area, and then scrub it with a nonmetallic brush. After giving it a good scrub, let sit overnight.
OxiClean can be used on many surfaces, indoors and out. For removing tannin stains from concrete, first sweep the surface and hose it off. Getting the concrete uniformly damp before you add a cleaner is always a good idea, because doing so will yield more even results.
Use Bleach
But that's not all; chlorine bleach can also be used for cleaning the concrete driveway. Of course, you should dilute it with equal parts of water or a 1:1 ratio. With the mixture ready, spray it on the driveway, allowing it to sit for 10 minutes. Then, use a stiff brush before rinsing with clean water.
White vinegar is often recommended as an eco-friendly cleaning product, and it is certainly effective at removing stains. However, many landscaping firms advise against using vinegar to clean paving, as the acid can damage the surface of the stones, particularly limestone or concrete pavers.
Experts say they can do the trick for the patio as well. 'You can remove black spots easily from patios in an eco-friendly, low-cost way, with white vinegar,' says Laura Harnett, Founder, Seep. 'It has antifungal and antibacterial properties and will also stop the mould or lichen growing back.