And, while it may be tempting to use household bleach for a quick clean, Beril says that this can ruin the patio stones and leave them looking patchy. 'There are many specialist patio cleaning products on the market including brick acid,' she cautions.
Bleach. Does a large area of your concrete need a good cleaning? Fill a bucket with warm water and about ¾ a cup of liquid bleach and start mopping. Let the bleach solution sit for a few minutes before using a bucket with clean water to mop up the bleach solution.
As a gentler cleaner, bleach can't harm concrete's durable material. Aside from being an effective cleaner and stain remover, it also acts as a disinfectant to the concrete surface.
To create a powerful mold-killing mixture, you can add one cup of bleach to a gallon of water. However, you should exercise meticulous care and caution since bleach can discolor your brick pavers and thus ruin your precious hardscape.
Dilute white vinegar with water in a bucket, at Walmart (a 50:50 solution is fine), and apply this natural, eco-friendly cleaning solution to the paving slabs with a firm brush and rinse thoroughly.
To clean smaller surfaces areas, pH-neutral soap, a little water, and a brush are suitable. If you want to clean larger areas of natural stone efficiently, you can reach for the electric patio cleaner or work with the pressure washer and a surface cleaner.
Use Bleach
Of course, you should dilute it with equal parts of water or a 1:1 ratio. With the mixture ready, spray it on the driveway, allowing it to sit for 10 minutes. Then, use a stiff brush before rinsing with clean water.
In fact, vinegar removes mold from concrete better than bleach. Bleach will only remove the top layer of mold, causing the mold to return.
After disinfection with bleach solutions, surfaces should be rinsed and dried. Bleach can be irritating to skin and mucous membranes, so any residue should be removed prior to returning animals to the environment.
Although the concrete is disinfected after just 5 minutes, lightening it will take a little longer. Leave the bleach solution on the concrete for about 20 minutes, then sweep briskly with the stiff broom to dislodge the softened grime. Use the scrub brush to tackle stubborn areas. Rinse off the patio.
Sodium Hypochlorite Patio Cleaners are used for more stubborn stains as you need the EXTRA strength solution, which is 50% stronger than the heavy duty solution and may be diluted with up to 6 parts water and 1 part Sodium Hypochlorite 15%.
While researching how to remove patio black spots you may have come across “Sodium Hypochlorite” which is a very strong bleach and while it may remove black spots, it will also damage the surface of anything it comes into contact with.
Protection From Water
Small cracks or grooves in concrete, brick, or asphalt are perfect places for mold because it can use rainwater to live and grow. When you use concrete sealers and coating you add a protective layer to the surface. This layer prevents water and moisture from penetrating the surface.
Patio Cleaner, Swimming Pool Chlorine
It is widely regarded as the best patio cleaner chemical on the market. Sodium Hypochlorite is used for more stubborn stains as it has an extra-strength solution. It may be diluted with up to 6 parts water and 1 part Sodium Hypochlorite.
Dish soap and water: Dish soap is a degreaser, and it works well to clean oily and grimy concrete. Create a cleaning solution of warm water and few drops of dish soap and apply it to the surface. Let it sit for a while, then mop the patio and rinse it with fresh water. Repeat the process as many times as needed.
Bleach is commonly used to whiten concrete and is very effective at doing so if the initial stain is removed beforehand. Bleaching stained concrete white prepares it for any additional coloring treatments that you may wish to apply in the future.
Spraying a vinegar solution (1 cup of vinegar per gallon of water) onto the surface, saturating it fully, should kill most strains of mold. Vinegar spray can be followed by power washing or manual hand scrubbing to remove the dead mold.
For lightly soiled concrete, you can remove dirt by using bleach mixed with water. Add 1/8th cup of liquid dishwashing detergent to the solution and pour it into a spray bottle. Spray the solution onto the surface, and let it sit for a few minutes. Scrub with a nylon-bristled brush.
Mold and mildew thrive on moist, shady surfaces. It's actually a fungal growth that can be identified by black, brown, grey, or white spots or streaks that appear on your sidewalk, or other outdoor surfaces. Also, if left untreated, these growths can cause pitting and deterioration on some outdoor surfaces.
Mixing vinegar and bleach together releases a poisonous chlorine gas, which can be fatal if inhaled at high enough concentrations.
Leave the Bleach on the Pavers
Allow the bleach to sit on the pavers for about 10-20 minutes. This will help to disinfect and clean the surface. It will also help remove any stains that are tough to remove and mold.
One of the best things for household stains is white vinegar, and the same can be said for how it targets stubborn garden dirt. This eco-friendly solution is made up of equal parts vinegar and water, which is then left to soak into the patio to correct any discolouration and also remove tough marks.