Bathrooms are notorious for amplifying sound, due to the open spaces with hard tile surfaces. So, if you can hear your neighbors flushing their toilet, this is probably why. (And chances are, they can hear you too.) To help drown out the sound, bring in a small linen closet to place against the wall.
A refill tube not lining up correctly or a faulty toilet flapper can make the toilet sound like it's flushing independently.
I usually just close the toilet lid, put a towel over it, sit on it, and flush. Makes the flushing noise much less loud.
Yup. It is actually happening inside your toilet tank and the vibrations are transmitted to the pipes in the walls That is whee they begin to resonate and cause the noise. You need to get another fill valve assembly for the toilet tank. They are available at any hardware store.
High Water Pressure in Your Pipes
One of the possible reasons that you're dealing with noisy pipes after flushing your toilet is that the water pressure in your home is too high. More often than not, turning on some of the other fixtures in your house should make the same noises as your toilet.
One of the more alarming types of sounds people hear from their plumbing is knocking, banging, or hammering. Industry professionals refer to these banging plumbing noises in walls as “water hammers.” This noise happens when a water valve in the piping shuts off suddenly, causing the running water to slam into it.
As the water level in the tank rises, a float lifts and eventually shuts off the water. Your float can be adjusted to shut off water flow at different levels. If your float is too high, water will constantly drain into the overflow tube, which can make it sound like your toilet is constantly running.
Gurgling Sounds
Have you heard your toilet making a gurgling sound, especially after flushing? Whenever there are blockages in the system, they interfere with the water-to-air ratio, allowing gasses to escape, which is what you hear as bubbling or gurgling sounds.
Hang Up Acoustic Panels
You have the opportunity to absorb unwanted noise from loud toilets by swapping these decorations out for acoustic panels. These panels come in different sizes and materials based on the manufacturer.
A noisy toilet can have several causes, but the most common culprits are: Leaking toilet valve. Malfunctioning fill valve. Calcium buildup inside the pipes.
The first models featuring Silent Flush are available in the MEDA and Kartell • LAUFEN collections, with plans to equip more models with this groundbreaking technology, leading new standards for quiet and efficient bathroom solutions.
Ghost flushing, or phantom flushing, occurs when your toilet tank refills independently without anyone pressing the handle. Water leaks from the tank into the bowl, causing the fill valve to activate periodically to refill the tank. It's similar to your toilet flushing itself, but it's just refilling.
Problems with the P-Trap
Problems with gurgling can arise if a sudden flow of water inside the pipe – such as when a toilet is flushed – creates a positive pressure that causes wastewater to back up in a drainage system. This can force water and air bubbles up the drain, resulting in that tell-tale gurgling sound.
Here's what you can expect to hear: Toilet Rushing After Flush: After you flush, it's natural to hear a gurgling sound as the water rushes down the drain. This simply indicates the water is flowing freely and doing its job. Toilet Refill Whooshing: Once the tank is empty, you'll hear the refilling process begin.
Ghost flushing happens because water is slowly leaking out of the tank and into the bowl. If it goes on long enough, it will trigger the toilet to flush. This not only makes for some spooky nights of sudden inexplicable noise, but it is also quite wasteful in terms of water.
What to do about ghost flushing in this case? Take the refill tube from your overflow pipe and leave it outside. This is a temporary solution that usually works but you should still call a professional plumber and schedule a visit for for a more long-term fix.
The most common cause of a vibrating sound in the walls when you flush is an issue with the toilet's fill valve – specifically, its diaphragm gasket. When this small part wears out, it becomes stiff and less flexible. When it tries to shut off, it bounces up and down, causing the vibrating sounds you hear.
Check under your sinks, toilets, and washing machine, and make sure that all of the valves are all the way open. Ask your neighbors to check theirs, too. Check the main water supply valve to the house, too. A faulty rubber washer in a faucet can also cause a moaning noise in the pipes.
Stud finders equipped with AC detection are indispensable tools for homeowners keen on pinpointing the exact locations of plumbing lines in their walls. The AC detection capability enhances the tool's ability to sense nearby electrical currents, which often run parallel to plumbing routes.
Banging or Clanging Noises in Pipes
This is a sign that the pressure in your pipes is already extremely high, and the shuddering is your pipes adapting to the pressure increasing when you turn off the water. This also means that you could find yourself dealing with plumbing leaks within a short period of time.
No, and in some cases, you may not need one. Certain municipal supplies regulate their water pressure safely, but if that pressure runs above 80 psi, you'll want to protect your plumbing system by installing one.