Once you've got clean towels, whether by machine washing or hand washing, it's time to dry. To keep microfiber towels absorbent, air drying on a flat surface or line drying are the preferred methods. If you'd rather use the dryer, be sure to do the following: Dry microfiber towels separately from other items.
After the lint trap has been emptied, you can place your microfiber towels inside the dryer separately from garments made with natural fibers as they tend to shed. Avoid adding dryer sheets and using high heat settings to dry microfiber towels as this may damage the fibers.
Air drying is the best method, and you'll find that the cloths will dry quickly. You can also put them in a dryer with no heat and no dryer sheets. If you absolutely have to use heat when drying, the maximum recommended temperature is 140°F.
Start a hot-water rinse cycle and let it fill up completely. The hot water helps break down chemicals and contaminants on the towels. Add about a cup of white vinegar to the mix, which will further help break down any chemicals that have made your towels less absorbent.
The ideal method: Hang microfiber cloths to dry outside in the sun or inside with good circulation. If you can, avoid throwing them into the dryer, which reduces microfiber's efficacy much faster. If you can't avoid machine drying, at least be sure you're doing it properly.
Drying your microfiber cloths on high heat will melt the fibers, making them ineffective the next time you try to trap and lock dirt and dust when you're cleaning. Since they also pick up lint, they'll become dirtier in the dryer by collecting lint left behind from a previous wash.
In fact if it seems like microfiber towels are not as absorbent as before, says Sweeney, they might have melted. The most common causes for melted microfiber are drying on high heat and placing in a dryer that wasn't fully cooled down.
Machine wash a load of microfiber cloths in cold or warm water. Do not use hot water. If using detergent, choose a gentle detergent with no scent or laundry additives. Use a small amount of detergent, no more than one or two teaspoons.
☠️ Avoid At All Cost: Never use the Towel Cycle, Sanitizer Cycle, or any other high heat cycle on your washer or dryer, as the heat melts and shrinks microfiber. Kill Germs Without Damage: 135º for 1 hour is the minimum temperature & time required to kill germs in the dryer and is safe for microfiber towels and pads.
Harsip said that the main reason why microfiber towels are ruined is drying them at high heat. Remember that it's not just bad for microfiber towels to be dried at too high of heat, but it can ruin them completely. Once the damage has been done from heat, it cannot be reversed.
Use a dedicated microfiber detergent like Towel & Pad Revitalizer or a dye free/perfume free liquid laundry soap - no powders or granulated. Set washer to a warm water setting. Some heat is required to break down waxes and polishes. Cold settings will not clean towels as effectively.
Prep a separate bucket with VERY HOT clean water and add blue dawn dish soap along with gentle tide. Add towels. Soak towels for roughly 2 hours. If a towel ever becomes so contaminated that it doesn't wash clean, it may be time to retire it to a new job.
Quick Drying: Dry up to 10 times faster than normal towels. Hang it outside and it will be dry very soon. Super Absorbent: This Ultra-Soft towel can hold up to 5 times water of it's weight. Easy to Carry Out: Light weight towels come with one carry bag.
Compared to cotton or equivalent weight, microfiber terry cloth generally dries faster. Suede and terry cloth have their unique characteristics and whether one is better than the other depends on what you are looking for.
Some people have been washing them in hot water and/or adding bleach to the wash cycle. Many members replied that using hot water is not good for the cloth because it breaks down the fiber, and most agreed that adding bleach is never a good idea.
Never use hot water, as it can melt the fibers. Don't use fabric softener, which can easily clog the open spaces in the microfiber and make it less effective.
Generally, they should be dried on low to medium heat. Use a dryer setting specifically for towels or a normal/regular cycle. High heat and overdrying can cause fabric damage, so be sure to remove the towels promptly once they're dry.
However, traditional microfiber towels will often leave a streak on the windows because they are so absorbent and have a polyester component to them,” explains Matthew Anderson, vice president and co-owner of Petra Vehicle Care.
Microfiber can hold up to seven times its weight in water, so you can tell that it's far less absorbent than cotton. However, this is more than sufficient to dry your hair.
For dusting, leave the cloth dry. For other chores, dampen the cloth, then wipe surfaces clean.
The two keys to towel drying (and banishing wet towel smells)… Towels won't dry out if they are poorly hung, like limited ventilation or if they are 'double hung' with another towel. Make sure you hang towels with enough space to air out properly - using a towel bar will be more effective than a towel hook.
All those extra ingredients, lubricants, and fragrances from fabric softener and dryer sheets actually coat the teeny tiny microfibers. And this isn't a good thing. If you've ever used fabric softener or dryer sheets on microfiber, you may have noticed that your microfiber becomes waxy-feeling.
Dirt particles cling, and are attracted to the finely wedged shaped fibers of microfiber, where as a cotton towel only pushes dirt and dust from one place or another. Such great characteristics allow Norwex microfiber cloths to quickly remove dirt and leave surfaces completely clean.
Always wash new microfiber towels prior to first use to remove any loose factory production fibers. Always wash newer black, orange, and red colored towels separately from lighter colored towels to avoid any risk of bleeding.