Does it matter if roller blinds are too long? No, because even if your blinds are far longer than the drop they're intended to cover, you don't need to roll them out to the full extent of their length, and can simply stop them before they start to form their own train!
If you own wood or faux wood blinds that are too long, there's no need to replace them. You can shorten them at home in a few easy steps. Read on to learn how to shorten wood blinds.
Do blinds have to be exact measurements? To ensure privacy and maximum light coverage, blinds should be wide enough and long enough to cover the entire window. Generally, you'll want to measure to the nearest ⅛-inch.
Measure Width
And you don't want to see too much of the wall through the slats of the blinds. Round off your measurements to the nearest 1/8 inch. As a rule, the blinds will look nice if they extend about 3 inches beyond each side of the window opening.
Measure both the width of the window and the height of the window. Consider adding an extra 3 inches to the width and height for optimum light control and privacy. Extending the blinds outside the window will also provide the space needed for the mounts and help the window appear larger than it actually is.
Inside mount blinds are typically flush with the window's opening and don't cover the window trim. On the other hand, outside mount blinds and shades get installed outside the window frame.
Work Out Your Blind Size
You then need to add a little for overlap: We recommend adding 10cm to the width to allow adequate overhang to block out light. We recommend adding 15-20cm to the height to allow most of the blind to be pulled up above the window to maximise the light.
The minimum depth for inside mount blinds is ¾ inches for non-flush blinds. However, to achieve a flush look the minimum depth for inside mount is 2 inches.
Outside Mount
We recommend adding between 3” to 6” to your width measurement. Also add 2 ½” to your height measurement to allow enough room for the mounting brackets above the opening. Our suggested floor clearance is ½” to 1”. At least 2” of flat space is required to outside mount verticals.
Horizontal blinds that are too long look bad, but also create a serious safety hazard for young children. Fortunately, shortening them is easy—all you need are scissors and a screwdriver.
After making your markings, take a sharp pair of scissors and cut your blind in the marked areas. You should begin by cutting off the bulk of the excess; you can even out the edges later. Once your blinds have been cut and evened out, its time to hang it up and see how it perfectly fits your window.
Additionally, those bacteria that were kept in the dark were also more closely related to respiratory diseases than those that stayed alive even with exposure to sunlight. So not only are you benefiting from the vitamin D that comes from the sun, but it could also be saving you from respiratory disease as well.
Yes, for your blinds to work to greatest effect and to achieve the right visual finish, window blinds should rest on the windowsill. The only exception to this is vertical blinds which require a small amount of clearance to prevent the louvres from dragging on the windowsill when operated.
Study: Curtains or blinds should ALWAYS be closed to get a healthy night's sleep. The research team discovered that moderate light exposure caused the body to go into a higher alert state.
Want to enjoy restful sleep in the middle of the day? Turn your blinds up. This direction is better for improved privacy too, as minimized gaps between the slats don't allow curious passersby to view the inside of the house. To let in a small amount of natural light, it's best to turn your blinds down and close them.
Adjusting your blinds with the slats facing down provides the maximum privacy. When in this position it offers the most coverage and protection from the outside looking in.
Measure the width to the nearest 1/8 of an inch between the outermost points where you'll place the blinds. For optimum light control, the blinds should extend 1-1/2 inches beyond the window opening on each side.
Blinds Too Big? Trim Them To Fit. Many blinds are constructed without internal mechanisms or ladder cords in the outer few inches of the blind. This allows window coverings that are too large for the window to be trimmed to fit new measurements.
If you've chosen to inside-mount your blinds, measure the width of the window space. Select a blind with a width that will fit inside the space. Don't go too narrow or you'll have gaps that reduce privacy and let in too much light.
The distance from the edge of the window frame will depend on the size of your blinds. For smaller blinds, you may want to install them 1/2" to 1" from the edge of the window frame. For larger blinds, you may want to install them 2" to 3" from the edge of the window frame.
Should I Install My Blinds as Inside Mount or Outside Mount? As long as your window frame has enough depth to mount blinds inside the opening, we almost always recommend an inside mount.
The short answer is: it depends! We recommend sticking to a common element in terms of color, fabric, or style. For example, if you want some blinds and some shutters, you could use the same color wood. For homes with varying styles in each room, you may want to focus on cohesion on a room-by-room basis instead.