You can easily clean your laminate floors with any Fabuloso product, but you must take precautions.
Yes, you can use Fabuloso to clean laminate flooring.
In a bucket, mix a solution of 1 gallon hot water, 1 cup vinegar, and a few drops of dish soap. Using a microfiber mop, mop the floor from back to front. Assess the room and follow a path that ensures you end at an exit. Use a soft-bristled brush to remove stubborn dirt, or in high-traffic areas.
Don't use abrasive or acidic cleaners. Harsh cleaners might strip the protective coating from the floor. Don't use steel wool or scouring powder. Both can leave scratches on your floor.
Known for its cleaning and disinfecting properties, white vinegar is also an excellent ally for shinning laminate floors. Diluted in water (one part vinegar to ten parts water), it deeply cleans while leaving a shiny surface. Its acidity helps neutralize alkaline residues that can dull the floor.
If your house has laminate floors, don't worry. “Laminate floors are easy to care for,” Meska assures. Arm yourself with a microfiber mop instead of a traditional mop head with strings, since excess water absorbed into the material can seep between the laminate planks and cause damage (like swelling or floor bubbling).
To clean and sanitize hard, non-food, non-porous surfaces: Dilute 1/2 cup of Fabuloso Antibacterial in a gallon of sterile deionized water and apply to surfaces with a mop, cloth or sponge or apply directly to surfaces with a mop, cloth or sponge. Leave on surfaces for at least 5 minutes. No rinsing required.
The lead plaintiffs were Elizabeth Dixon, Jeannie Patora, and Arnold Thomas, who claimed they were deceived about the safety of the products and exposed themselves to harmful bacteria in Fabuloso bottles, which were removed from store shelves due to the serious health risks the products posed for consumers.
Commercial vinyl floor cleaners are available, but you can make a simple, effective cleaner for vinyl floors by mixing apple cider vinegar with water. The vinegar's acidity removes dirt without leaving a soapy film. Mix one cup of cider vinegar with a gallon of hot water.
If your laminate floors remain dirty after mopping, it might be due to using too much water, a dirty mop, or the wrong cleaning solution.
You can usually remove stains like scuff marks by using a bit of full-strength Pine-Sol® Multi-Surface Cleaner and gently buffing with a towel. Never use scouring pads, buffers or wire brushes to remove scuff marks. The same goes for harsh chemicals, as they can damage laminate flooring.
Clean without the damage
Again, mopping laminate floors can cause damage, as too much water can cause the laminate to swell and warp. Instead, bust out the Flash Powermop, which can power through grime with just enough cleaning solution and moisture, without damaging your laminate.
Black Diamond Stoneworks Wood & Laminate Floor Cleaner
Our top pick for cleaning laminate floors is Black Diamond Floor Cleaner. This cleaner is super effective on laminate, but we love that it can be used on many surfaces, including hardwood floors, tile, and marble.
Can you mix Fabuloso and vinegar safely? Yes, you can! However, you must keep a few things in mind before mixing and using this combination.
Overall, the best mop for laminate floors is the Swiffer PowerMop thanks to its powerful mophead that reaches into grouted flooring to quickly and effectively clean up dirt and debris.
A search for "Fabuloso" on the United States Consumer Product Safety Commission website did not return announcements of any other recalls for Fabuloso products, which means that there was not an active Fabuloso recall in late 2024 in the United States.
The recall, conducted in cooperation with the U.S. Consumer Product Safety Commission, encompasses 4.9 million bottles produced from December 14, 2022 through January 23, 2023, when the manufacturing issue was corrected.
For Fabuloso 2x Multi-Purpose Concentrated, combine ⅛ of cup with a gallon of water, and for the non-2x versions, combine 1 gallon of water with ½ cup of Fabuloso Antibacterial Multi-Purpose Cleaner. For the most gentle, non-abrasive clean, use a laminate floor mop with microfiber pads, such as the Mr.
You can use Pine-Sol® on wood floors, though it is not recommended for use on unfinished, unsealed, unpainted, waxed, oiled or worn wood.
“It penetrates dirt and grime on floors while being mild and won't cause damage as long as you don't use too much water.” Rinsing Required?: Yes, go back with a second pass of plain hot water to make sure any soap residue is removed.
Laminate flooring, while cost-effective and popular, can experience problems such as buckling, warping, and fading. These issues often arise from water damage, prolonged exposure to sunlight, and inherent design limitations.
Gently wipe the floor using a clean, flat-head microfiber mop in the direction of the grain. It is one of the best ways to make laminate wood floors shine. Never use a sponge as it may leave streaks on the floor when it dries.
The best way to clean a laminate floor involves using a microfiber mop and mopping in the direction of the floor planks.