Sealing your concrete not only ensures your concrete surface is protected, but that it is long lasting. It should also be noted that compared to the cost of replacing a concrete surface, sealing is relatively inexpensive and easy to do–definitely worth a long lasting concrete floor, patio, slab, or driveway.
While the advantages outweigh the negatives, there are some disadvantages that you should keep in mind before sealing your concrete driveway. Sealant can make the surface slippery. Sealants tend to dry down with a glossy or semi-glossy sheen that can be quite slick, especially when wet.
Outdoor concrete sealers are not only worthwhile but necessary. Experts who recommend having a concrete surface sealed are doing their customers a big favor. Without this extra layer of protection, concrete will absorb moisture and may begin to crack, spall, flake, and discolor, among other things.
Acrylic Concrete Sealers: Acrylic sealers last 1-3 years before they need to be re-coated. Epoxy Coatings: Epoxy coatings last 5-10 years before they need to be re-coated. Urethane Coatings: Urethane coatings last 5-10 years before they need to be re-coated.
One of the biggest disadvantages of concrete driveway sealing is the cost. The materials and labor required to seal a concrete driveway properly can be expensive. In addition, concrete driveways that are improperly sealed can trap moisture underneath the surface, which can lead to problems such as mold and mildew.
The Drawbacks of Seal Coating
There are some drawbacks to sealcoating, however. One is that it can be messy and difficult to apply evenly. It's also important to note that sealants will not repair significant damage to your driveway; they will only protect it from further damage.
After discussing the factors you need to look for and the regional location of the project, in broad terms, Spring is in fact the best time of year to seal concrete. With its moderate temperatures and humidity levels, it tends to provide ideal conditions for the application and curing of sealers.
A: Yes! Old concrete can be sealed for the first time or resealed if it has been previously sealed with a concrete sealer. Before sealing old concrete you want to make sure you determine if the concrete has been previously sealed.
I asked Bryan if he could give us some insight on what it takes to actually remove a coat of sealer from concrete. He recommends starting with 2,000 psi and stepping it up to no more than 4,500 psi. The temperature of the water varies but is vital in this removal method.
In order to properly seal your concrete, then, you must clean the surface of the substrate before applying a concrete sealer of any variety. The easiest and most effective way to clean the concrete will vary depending on the condition of your concrete and whether it has been treated with chemical stains.
Leaving concrete unsealed will leave it with a flat look. The color will remain flatter and dull, in addition to the concrete remaining porous and easier to damage. Sealing the concrete will enhance the colors and give it more of a marble or mottled look, smoother and with richer colors.
Can Sealing Prevent Cracks on Concrete Surfaces? Concrete sealing can stop most types of concrete fractures. This fact is especially true if the crack is a result of poor-quality work in the concrete mix or site preparation. However, sealing can prevent future damage that may start from the top layer of the concrete.
Sealers, particularly solvent-based sealers, will darken concrete. If unevenly applied, it will create light areas where there is less sealer, and darker areas where there's more. If applied by sprayer, it may appear like “stripes”. Uneven roller application may leave darkened roller marks.
Sealing concrete also enhances its appearance, giving it a much smoother and better-looking surface, which ultimately increases the value of your property. Overall, there are numerous advantages that come with properly sealing your concrete surface - not least of which is time saved on costly repairs!
Sealers can be slippery. Sealing concrete can create a slippery surface, especially when wet.
Seal a Concrete Garage Floor
Remove everything from the garage floor. Clean oil and stains from the surface with a pressure washer or chemical cleanser (often called a degreaser) and allow it to dry. Sweep and vacuum away dirt and debris. Apply one or two coats of epoxy sealer and allow it to cure before use.
Sealing your concrete isn't really a labor-intensive, nor costly, job. By sealing your concrete every 2-5 years, as recommended by experts, you should keep your floor in good shape, preventing cracks, pitting, and additional damage.
Once applied, sealers create a chemical reaction and the outside temperature decides how fast that reaction occurs—or if it happens at all. Most manufacturers recommend 50 to 90 degrees as the ideal temperature range for applying concrete sealer.
Considering all the factors listed above, the best months for pouring concrete would be June, September, and early October. During these months, the weather will be mild and dry. Therefore, the concrete will set properly.
If it rains and the acrylic hasn't had a chance to cure, it will delaminate, and you will end up with white blushing and hazing throughout the sealed area. If you used a water-based acrylic, the delaminated coating would have to be removed using a coating remover like the Armor CR100, and then re-applied.
Left unsealed, the colors will fade, water marks may be an issue, and stains can penetrate leaving ugly oil spots where the service guy left his old jalopy parked on the driveway. It's pure and simple, the job just won't last without a good sealer.
The application of a sealant helps extend the life of outdoor concrete by making it more resistant. It reinforces the density and hardness of the material, significantly increasing its tensile strength. This helps prevent cracks, scaling and water damage.
Not sealing it will only make it more susceptible to damage from the elements and other things. Sealcoating can effectively protect your driveway from rain, hail, snow or oil. It will give you a water-resistant surface, protecting you from the elements. Your driveway is also protected from the sun's damaging UV rays.